Water Compact WK3
Compact water temperature control units with configurations up to 180 °C. Specify the working temperature and flow.
Specify operating temperature, thermal load, flow and available cooling water.
EQUIPMENT SOURCING TO YOUR REQUIREMENTS
SINGLE temperature control and cooling equipment
We accept enquiries for SINGLE equipment for heating, cooling and maintaining process temperatures. Select water or oil temperature control units, chillers and test systems according to the medium, temperature range and thermal load.
SINGLE equipment by application
Water temperature controllers, oil units and chillers serve different duties. The ranges below apply to specific manufacturer configurations; the exact version must be checked.
Water Advanced WP4
WP4 water units are offered in 90, 150, 180 and 200 °C configurations. Select by process temperature, thermal load and hydraulic requirements.
Specify operating temperature, thermal load, flow and available cooling water.
Oil Advanced D0
D0 oil temperature controllers have 180 and 300 °C configurations. Specify the heat transfer oil, operating temperature and connected process.
Specify operating temperature, thermal load, flow and available cooling water.
easitemp 6-95 2.0
easitemp 6-95 2.0 water unit: up to 95 °C, 6 kW heating and stated flow of 40 l/min. Check the operating point for the actual circuit.
Specify operating temperature, thermal load, flow and available cooling water.
Chill Advanced C 14 L/W
C 14 L/W chiller temperature range: −5 to +30 °C. Provide the required temperature, thermal load and heat rejection conditions.
Specify operating temperature, thermal load, flow and available cooling water.
SFC Stand Alone
SFC Stand Alone water distributor: 4, 6, 8 or 16 circuits with a separate control box. Specify circuit count and flow per circuit.
Specify operating temperature, thermal load, flow and available cooling water.
Testing CHT 5
CHT 5 supports temperature cycling and battery testing with configurations spanning −45 to +130 °C. Provide the test profile and sample thermal load.
Specify operating temperature, thermal load, flow and available cooling water.
Variotherm ATT H
Variotherm ATT H uses hot and cold circuits for dynamic temperature changes; the listed configuration is rated up to 200 °C. Specify cycle temperatures and stage duration.
Specify operating temperature, thermal load, flow and available cooling water.
Equipment selection for your process
Describe the process: mould temperature control, equipment cooling or temperature testing. Include minimum and maximum temperatures, medium, thermal load, flow, pressure, power supply and control interface. State whether new or used equipment is requested.
Spare parts for installed SINGLE equipment
Send the nameplate, model, serial number and fault description. For a pump, heater, valve, sensor, seal or controller, include the part number or drawing position. Configuration and compatibility are checked against the specific unit documentation.
Send the model or technical specification
Send the model or specification, quantity and delivery city. Price, lead time, configuration and equipment condition are established in the quotation.
