Equipment and parts by brandBrowse manufacturers EQUIPMENT SOURCING TO YOUR REQUIREMENTS
We source AiM Motorsport equipment for recording and analysing motorsport data: loggers, displays, video systems and sensors. We also handle enquiries for replacement cables, sensors and components for existing systems.
These devices serve different purposes. Interfaces, cable sets and ECU compatibility are checked for the specific configuration.
Data loggers: EVO6 has 8 analogue and 4 speed inputs; EVO6L has 5 analogue and 2 speed inputs. The versions use different connectors, Motorsport and Binder 712, so wiring must match the version.
Specify the ECU, installed AiM equipment and required functions.
The TFT instrument family includes dash loggers and Strada dash versions. Strada does not have built-in data recording; a separate Strada Logger adds this function. Provide the full designation, not only the screen size.
Specify the ECU, installed AiM equipment and required functions.
GPS lap timers. Solo 2 DL additionally records ECU data via CAN, RS232 or K-line. Available channels depend on the supported protocol of the particular ECU.
Specify the ECU, installed AiM equipment and required functions.
Karting instruments showing lap, RPM and speed data. MyChron6 has one temperature input and MyChron6 2T has two; sensor options cover exhaust gas, cylinder head or water temperature.
Specify the ECU, installed AiM equipment and required functions.
Camera with real-time speed, RPM and lap data overlays. It supports direct ECU CAN connection; the built-in logger records channels in MP4 and uses USB-C storage. Support for the particular ECU must be checked.
Specify the ECU, installed AiM equipment and required functions.
Lambda controllers: LCU1S works with one Bosch LSU 4.9 sensor and LCU2 with two. Open versions provide configurable CAN identifiers, baud rate and messages. Configuration must match the receiving system.
Specify the ECU, installed AiM equipment and required functions.
Logger with integrated GPS, an inertial platform and Wi-Fi. System configuration and compatibility are checked for the data acquisition task.
Specify the ECU, installed AiM equipment and required functions.
MXL Strada is discontinued and listed in the AiM archive. For existing units, enquiries can cover oil pressure and temperature sensors, thermocouples and wiring. Connections must be checked against the manual, channel and harness version; compatibility with current MX devices is not implied.
Specify the ECU, installed AiM equipment and required functions.
UTV drive-belt temperature monitoring system with a display and infrared sensor. Warning and Alarm thresholds configure the temperature alerts.
Specify the ECU, installed AiM equipment and required functions.
The AiM catalogue includes EGT exhaust gas temperature sensors, PT100 temperature sensors, pressure sensors and ECLIPSE linear displacement sensors. Selection requires the range, mounting location, marking and connection interface.
Specify the ECU, installed AiM equipment and required functions.
Provide the vehicle model and year, ECU and connection protocol, required logging channels and installed equipment. For video and data synchronisation, specify the camera and logger models. Attach a wiring diagram and connector photos.
Send the full device, sensor or cable marking, connector photos and cable length. State the quantity to be measured and installation location. Similar connectors do not by themselves confirm electrical compatibility. Legacy MXL uses Race Studio 2; current families use RaceStudio 3 as specified in the documentation for the particular model. State the software version for channel and ECU configuration and recorded data analysis.
Tell us the required device, quantity and delivery location. Sourcing feasibility, scope and lead time are confirmed during quotation.
English-speaking contact