Equipment and spare partsBrowse manufacturers Search by manufacturerFROM WORKPIECE TO PREPARED SPECIMEN
Source TROJAN equipment for cutting, mounting, grinding and polishing specimens, and for hardness testing. Selecting a machine or equipping a laboratory starts with material, specimen dimensions and the required result. Consumables and spare parts can be requested separately.
Cutting preserves the area of interest, mounting supports the specimen, and grinding and polishing prepare its surface for analysis. Compare maximum specimen size, feeding and loading methods, fixtures and throughput.
Automatic cutting machines for sectioning specimens before subsequent preparation. Selection between Beta-250, Beta-500, Beta-400Pro and Beta-300Pro starts with maximum workpiece cross-section, material, clamping and feed requirements.
Attach a drawing, cutting directions and throughput requirements. Wheel, coolant and clamps are checked for the selected configuration.
A compact manual cutting machine for a dedicated workstation. Consider it when the operator controls sectioning and automatic feed is not an initial requirement.
Specify specimen dimensions, material, cutting frequency and fixtures, and check available installation space.
A precision automatic specimen cutting machine. Selection depends on the area of interest and permissible material damage, not only on the ability to section the workpiece.
Specify material, geometry and required section thickness. Cutting wheel and clamping are reviewed against the specimen.
Hot mounting presses for supporting specimens during subsequent grinding. Mould diameter, resin properties and the specimen's tolerance to temperature and pressure must be considered together.
Provide specimen and mount dimensions, quantity per cycle and edge retention requirements. Cold mounting can be considered separately for sensitive specimens.
Alpha-335G is intended for rapid coarse grinding, while Alpha-335P provides automatic grinding and polishing. Material removal requirements and final surface quality guide the choice between these preparation stages.
Provide the initial surface condition, maximum specimen size, required removal and the next preparation step.
Single-disc automatic grinding and polishing machines. Configuration selection requires checking platen diameter, specimen holder, loading method and consumable dosing.
Specify mount diameter, specimens per cycle, material and the grinding and polishing stages used.
Twin-disc automatic grinding and polishing systems. Two platens allow different preparation stages to be organised; head and fixture configuration must be confirmed for the chosen model.
Send the preparation sequence, platen and mount diameters, specimen count and required dosing automation.
An automated Rockwell hardness tester. The test method depends on material and inspection requirements, so brand or hardness range alone is insufficient for selection.
Specify the scale, test standard, specimen dimensions and measurement reporting requirements.
An automatic Brinell hardness tester with digital indentation analysis. Test standard and specimen material determine the method, load and surface preparation.
Send the standard, load, specimen dimensions and material, plus indentation measurement and result storage requirements.
Consumables are selected by operation: abrasive or precision cutting wheel, hot or cold mounting resin, grinding media, polishing cloth and suspension. One product does not replace the complete preparation sequence.
Attach part references, dimensions and quantities; if the reference is unknown, send packaging photos and your preparation procedure.
Specify material, hardness and initial workpiece dimensions, specimens per shift, required surface quality and subsequent analysis method. Attach your preparation procedure, specimen photos and existing equipment list. State whether you need one machine or a sequence of cutting, mounting, grinding, polishing and hardness testing operations.
For cutting wheels, specify specimen material, wheel dimensions and bore; for resins, specify mounting method and edge retention requirements; for grinding and polishing, include diameter, attachment, grit and preparation procedure. Repairs require full model, serial number, part reference and an assembly photo. Compatibility and scope of supply are checked separately.
Include quantity, delivery location and supporting files: nameplate, specimen drawing, specification or consumables list. We review configuration and sourcing feasibility before preparing a proposal.
English-speaking contact