Italian Precision Hydraulic Pumps, Drop-in Cartridge Kits & Circuit Valves
B&C Hydraulics Industrial & Mobile Hydraulic Pumps
SpareX delivers the complete international lineup of precision industrial and mobile hydraulic equipment manufactured by B&C Hydraulics S.r.l. in Reggio Emilia, Italy. We provide fixed-displacement vane pumps of the BV, BQ, and BD series, heavy-duty mobile pumps of the HQ and HD series, external aluminum and cast iron gear pumps of groups 1, 2, and 3 (BG10, BG20, BG30), drop-in replacement cartridge kits for rapid field overhaul, and in-line flow and pressure control valves for machine tools, injection molding presses, industrial power packs, and heavy mobile machinery worldwide.
B&C Hydraulics Fluid Power Equipment & Cartridge Range
Select your required B&C Hydraulics pump category or replacement cartridge series below, or submit your hydraulic circuit specifications for engineering analysis and commercial quotation.
B&C Hydraulics BV Series Industrial Vane Pumps
Engineered for demanding industrial fluid power systems, the B&C Hydraulics BV series of fixed-displacement vane pumps delivers exceptionally quiet, pulse-free fluid delivery across diverse hydraulic circuits.
The hydraulically balanced dual-cavity design balances internal radial forces on the drive shaft bearings, extending pump operational longevity in continuous heavy-duty service across CNC machine tools, hydraulic presses, and automated foundry lines.
The product range encompasses single BV01 and BV02 models covering displacements from 3.3 to 150 cc/rev at operating pressures up to 210 bar, as well as multi-section tandem BV11 and BV12 configurations.
The modular internal cartridge architecture permits rapid field reversal of shaft rotation direction without structural rework. All units operate efficiently on anti-wear mineral fluids (ISO VG 32, 46, 68) with standard NBR or high-temperature FKM fluorocarbon seals.
B&C Hydraulics BQ Series High-Pressure Vane Pumps
B&C Hydraulics BQ series high-pressure vane pumps are engineered for demanding hydraulic circuits subject to intense pressure spikes up to 280 bar in heavy industrial cycles.
Enhanced cam ring rigidity and precision heat-treated vanes prevent fatigue failure during severe duty cycles on plastic injection molding machinery, metal recycling balers, and heavy industrial hoisting platforms.
Covering displacements from 10 to 193 cc/rev across the BQ02, BQ04, and BQ05 frame sizes, this range offers complete dimensional and functional interchangeability with Eaton Vickers VQ series pumps (20VQ, 25VQ, 35VQ, 45VQ).
Optimized internal porting geometry prevents cavitation erosion at high shaft speeds, while ductile iron casing construction reliably dampens hydraulic shock waves during rapid actuator switching.
B&C Hydraulics BD Series Pin-Vane Industrial Pumps
The heavy-duty BD series from B&C Hydraulics features an advanced pin-vane mechanism where internal line pressure acts on miniature balancing pins within the vane slots to maintain optimal tip-to-ring contact.
This pin-vane design dramatically minimizes tip friction and heat buildup, achieving volumetric efficiencies exceeding 93% at continuous operating pressures up to 320 bar.
Conforming dimensionally to Parker Denison T6 series standards (T6C, T6D, T6E), BD02, BD04, and BD05 pumps are widely specified for continuous rolling mills, metallurgical handling systems, drilling rigs, and offshore marine winches.
The BD family accommodates diverse SAE B and SAE C mounting flanges alongside splined shaft options and operates dependably on both mineral oils and fire-resistant synthetic hydraulic fluids.
B&C Hydraulics HQ & HD Series Mobile Vane Pumps
Specialized HQ and HD series vane pumps are tailor-made for mobile commercial vehicle hydraulics, municipal refuse collection trucks, truck-mounted cranes, and highway maintenance equipment.
The reinforced casing and heavy-duty shaft bearings absorb extreme cyclic pressure shocks from compaction cylinders and withstand wide oil temperature swings ranging from -20 to +80 °C alongside continuous chassis driveline vibration.
These units feature direct-mount rear PTO flanges conforming to ISO 7653 standards and standard DIN 5462 splined shafts for compact integration with vehicle power take-off boxes.
Enhanced internal bearing assemblies withstand substantial radial and axial shaft forces, ensuring uninterrupted hydraulic supply across full engine throttle ranges.
B&C Hydraulics BG10 Group 1 External Gear Pumps
Combining compact overall dimensions with exceptional power density, B&C Hydraulics BG10 Group 1 external gear pumps operate reliably at shaft speeds up to 5,000 rpm.
The high-integrity extruded aluminum alloy body features floating axial thrust compensation plates that minimize volumetric leakage as operational fluid temperatures rise.
With displacements spanning 0.95 to 9.85 cc/rev at continuous working pressures up to 290 bar, BG10 pumps serve as durable hydraulic power sources for tail lifts, workholding fixtures, compact utility power packs, and proportional pilot control circuits.
Configurations include 1:8 taper shafts, parallel keyed shafts, European or Bosch mounting faces, and bi-directional BM10 gear motors.
B&C Hydraulics BG20 & BG30 Group 2/3 Heavy Gear Pumps
Group 2 and Group 3 gear pumps from B&C Hydraulics (BG20 and BG30 series alongside BM20 gear motors) deliver rugged fluid power for agricultural tractors, wheel loaders, road paving machinery, and heavy industrial plant units.
Heavy cast iron mounting flanges and rear covers are paired with high-tensile aluminum gear casings to dampen operational vibration. Displacement for the BG20 family ranges from 4.5 to 30 cc/rev (up to 280 bar), while the BG30 family delivers 19 to 62 cc/rev (up to 290 bar).
Multi-section tandem assemblies (such as BG222 and BG320) permit multi-circuit operation from a single primary input shaft. Case-hardened gears machined to tight tolerances ensure low delivery ripple and overall mechanical efficiency up to 93%.
B&C Hydraulics Drop-In Vane Pump Cartridge Kits
Genuine B&C Hydraulics replacement cartridge kits provide rapid, factory-calibrated overhaul solutions for BV, BQ, and BD vane pumps, as well as drop-in compatibility for competitor models from Eaton Vickers (V and VQ series) and Parker Denison (T6 and T7 series).
Each self-contained kit comprises a dynamic balanced rotor, hardened vanes, an elliptical cam ring, port plates, and seal sets.
Replacing a worn cartridge directly on the machine is accomplished in 15 to 20 minutes without disconnecting suction or pressure lines, preventing fluid contamination and eliminating extensive manufacturing downtime.
Factory laser inspection of cam profiles and strict pre-calibration of operating clearances guarantee immediate rated flow recovery upon system restart.
B&C Hydraulics In-Line Flow & Pressure Control Valves
B&C Hydraulics manufactures a rugged selection of in-line hydraulic valves designed for direct line-mounting in industrial and mobile circuits.
The offering includes in-line check valves featuring low cracking pressures (0.35–0.5 bar) and bubble-tight shutoff, precision needle flow control valves for fine actuator velocity adjustment, one-way restrictor valves permitting unrestricted reverse flow, and direct-acting or pilot-operated pressure relief valves adjustable up to 350 bar.
Valve bodies are machined from phosphated carbon steel or anodized aluminum to ensure lasting corrosion protection in tough operating environments. Each valve guarantees linear flow calibration and consistent cracking pressure stability across variable temperature regimes.
Official B&C Hydraulics Technical Literature & Catalogs
Engineering Fluid Power Sizing for Industrial Systems and Mobile Fleets
To select the optimum B&C Hydraulics pump assembly for your manufacturing plant or mobile fleet, determine key circuit parameters: required geometric displacement per revolution (from 0.95 to 193 cc/rev), nominal and intermittent working pressure ratings (up to 320 bar), drive speed range from electric motors or PTO drives, direction of rotation (clockwise or counter-clockwise viewed from shaft end), and mounting flange pattern (European 4-bolt, SAE A/B/C standards, or German 2-bolt designs). When refurbishing existing hydraulic systems, SpareX engineers specify exact dimensional and performance matches for legacy Eaton Vickers V/VQ series and Parker Denison T6/T7 vane units without modifying existing piping. For mobile multi-circuit machinery, multi-section tandem vane and gear combinations are configured to feed independent hydraulic actuators from a single prime mover.
Genuine Factory Cartridge Kits, Rotors, Vanes, and In-Line Valves
To prevent costly downtime in continuous process lines and mobile machinery, SpareX maintains rapid dispatch channels for genuine B&C Hydraulics replacement cartridge kits. Each factory pre-calibrated cartridge unit includes a precision balanced rotor, hardened vanes, an elliptical cam ring, port plates, and seal sets. Swapping a worn cartridge unit can be executed in under 20 minutes directly on the machine without disconnecting pressure or suction piping and without draining the oil reservoir. We also supply in-line check valves, pressure-compensated needle flow regulators, and direct-acting pressure relief valves engineered to maintain system integrity under rigorous cyclic shock loads.
Contact SpareX B&C Hydraulics Specialists
Submit your required bill of materials, pump displacement parameters, or equipment nameplate photographs. SpareX engineering specialists will promptly review your inquiry and prepare a competitive commercial quotation.
