SpareX organizes the international engineering supply of precision analytical, optical spectroscopy, and universal materials testing machinery developed by Shimadzu Corporation. Our comprehensive catalog features flagship Nexera ultra-high-performance liquid chromatographs operating at system pressures up to 130 MPa, Nexis GC-2030 gas chromatographs featuring advanced AFC digital flow controllers, LCMS-8060 NX high-sensitivity triple-quadrupole mass spectrometers, UV-1900i double-beam UV-Vis spectrophotometers, Autograph AGX-V electromechanical universal test frames rated up to 600 kN, combustion TOC-L total organic carbon analyzers, and TMP magnetic levitation turbomolecular vacuum pumps.
Select the required analytical instrumentation category or submit your target analyte list and test parameters to receive an engineered commercial proposal.
Shimadzu Nexera & Prominence UHPLC/HPLC Liquid Chromatography Systems
Shimadzu Nexera ultra-high-performance liquid chromatography (UHPLC) and Prominence HPLC platforms deliver benchmark throughput for pharmaceutical characterization and clinical assays.
LC-40 solvent delivery pumps operate at pressures up to 130 MPa (1300 bar) at flow rates up to 5 mL/min, maintaining stability via digital pulse compensation. The SIL-40 autosampler executes injection cycles in 7 seconds with sample carryover below 0.00015%.
Compact i-Series LC-2050 instruments integrate pumps, degassers, column ovens, and PDA detectors in one housing.
System pressure to 130 MPa (1300 bar), 7 s injection cycle, carryover < 0.00015%, column temperature to 85 °C.
Shimadzu Nexis GC-2030 & Brevis GC-2050 Precision Gas Chromatographs
Shimadzu Nexis GC-2030 and compact Brevis GC-2050 gas chromatographs deliver high separation fidelity for petrochemical fractionation, refinery gas, and environmental volatiles.
The flagship GC-2030 integrates digital flow controllers (AFC) providing pressure repeatability of 0.001 kPa, governed via a color touch screen.
The platform accommodates three injection ports and four simultaneous detectors, including flame ionization detectors (FID) with 1.2 pg C/s limits and barrier discharge detectors (BID). Brevis GC-2050 saves 35% bench space while running standard capillary columns.
AFC pressure precision 0.001 kPa, FID limit 1.2 pg C/s, universal BID detector, up to 4 simultaneous detectors.
Shimadzu LCMS-8060 NX, GCMS-QP2020 NX & MALDI Mass Spectrometry Systems
Shimadzu LCMS, GCMS, and MALDI mass spectrometers deliver molecular identification and trace quantification across pharmaceutical kinetics and environmental testing.
The LCMS-8060 NX triple-quadrupole system features IonFocus ion optics, delivering acquisition speeds up to 30 000 Da/s with 5 ms polarity switching. The GCMS-QP2020 NX single-quadrupole system incorporates a differential turbomolecular pumping system rated at 360 L/s.
The benchtop MALDI-8020 TOF platform integrates a 200 Hz solid-state UV laser for rapid polymer profiling.
Triple quad scan 30 000 Da/s, 5 ms polarity switching, 360 L/s differential turbopump, 200 Hz linear MALDI TOF.
Shimadzu optical and elemental spectroscopy instruments cover broad ultraviolet, infrared, and X-ray modalities for manufacturing QC.
The UV-1900i double-beam UV-Vis spectrophotometer incorporates a Czerny-Turner grating spanning 190 to 1100 nm with a 1 nm bandwidth and photometric accuracy within ±0.002 Abs.
The IRTracer-100 FTIR spectrometer utilizes dynamic alignment achieving a 60 000:1 signal-to-noise ratio and 0.25 cm^-1 resolution. The EDX-7200 X-ray fluorescence spectrometer pairs a silicon drift detector (SDD) to analyze elements from Na to U without liquid nitrogen.
Shimadzu Autograph AGX-V electromechanical test frames and AGS-X systems provide load capacities for tensile, compression, and flexural testing of metals and plastics. AGX-V floor frames support capacities from 10 to 600 kN, guided by dual preloaded ball screws driven by AC servo motors.
Acquisition electronics sample force and displacement data up to 10 kHz (0.1 ms), capturing fast yield points. The load weighing system delivers certified Class 0.5 accuracy across 1/1 to 1/2000 of load cell capacity, complying with ISO 7500-1 and ASTM E4.
Load 10 to 600 kN, 10 kHz acquisition rate, Class 0.5 accuracy across 1/1–1/2000 range, TRAPEZIUMX-V software.
Shimadzu TOC-L Laboratory & TOC-4200 On-Line Total Organic Carbon Analyzers
Shimadzu TOC-L laboratory carbon analyzers and TOC-4200 on-line systems incorporate 680 °C combustion catalytic oxidation to quantify total organic carbon in water matrices. The 680 °C platinum catalyst combustion decomposes suspended solids and refractory aromatics without hazardous oxidizers.
The TOC-L CPH/CSN platform measures concentrations from 4 ug/L (ppb) up to 30 000 mg/L via automated on-board dilution. Generated CO2 is quantified by a non-dispersive infrared (NDIR) detector. On-line TOC-4200 delivers 24/7 monitoring for wastewater and ultrapure water loops.
680 °C platinum combustion, detection limit 4 ug/L, upper range 30 000 mg/L, NDIR sensor, on-line TOC-4200 system.
Shimadzu TMP Maglev Turbomolecular Vacuum Pumps & EI Intelligent Controllers
Shimadzu TMP series high-vacuum turbomolecular pumps are built for clean processing in semiconductor tools, accelerators, and surface analytical instrumentation.
The TMP design incorporates a 5-axis active magnetic bearing (AMB) system that eliminates hydrocarbon lubricants from the ultra-high vacuum environment.
Units across TMP-803, TMP-1003, and TMP-3403 lines deliver nitrogen pumping speeds from 800 to 3400 L/s with ultimate pressures lower than 10^-8 Pa. Digital EI-D power controllers govern rotor positioning in real time, preventing venting contact.
5-axis active magnetic levitation, nitrogen speed to 3400 L/s, ultimate vacuum 10^-8 Pa, EI venting protection.
Shimadzu AP-W, AP-X, and ATX analytical balances alongside MOC63u halogen moisture analyzers provide high-accuracy mass and moisture determinations. Flagship AP-W semi-micro analytical balances feature the UniBloc one-piece aluminum alloy force sensor.
The UniBloc architecture delivers readability down to 0.01 mg with fast 1.5 to 2.0 second stabilization times and PSC internal calibration. The MOC63u moisture balance pairs a 400 W halogen lamp with precision weighing, measuring moisture from 0.01% to 100% in 1 °C steps.
UniBloc single-piece sensor, readability 0.01 mg, 1.5 s stabilization, MOC63u halogen heating to 200 °C.
Official Shimadzu Catalogs & Method Specifications
Engineering Selection of Analytical Hardware for Advanced Laboratories
Specifying Shimadzu analytical hardware requires thorough evaluation of target compound concentrations, sample matrix complexity, detection limits, and daily sample throughput requirements. For pharmaceutical QA/QC and pharmacokinetic studies, Nexera UHPLC systems paired with LC-40 solvent delivery pumps and SIL-40 ultra-fast autosamplers deliver baseline stability and ultra-low sample carryover below 0.00015%. For hydrocarbon gas fractionation and volatile trace monitoring, Nexis GC-2030 systems equipped with flame ionization detectors (FID) or barrier discharge ionization detectors (BID) achieve parts-per-billion sensitivity with reproducible pneumatic flow control. When analyzing pesticide residues and biological contaminants in dirty matrices, LCMS-8060 NX triple-quadrupole mass spectrometers provide rapid 30 000 Da/s scan rates and 5 ms polarity switching. For structural material evaluation and tensile testing of high-strength alloys or composites, SpareX engineers specify Autograph AGX-V dual-column test frames with class 0.5 load cells. We deliver harmonized laboratory solutions complete with power protection, pure gas regulation, and exhaust interfaces.
Genuine Rapid-Replacement Consumables, Columns & Service Kits
To maintain uninterrupted uptime across mission-critical testing lines, SpareX supplies authentic Shimadzu consumables, chromatographic columns, and preventive maintenance service kits. Our portfolio covers analytical and preparative Shim-pack C18/HILIC HPLC columns with particle sizes from 1.6 to 5 micrometers, seamless stainless steel and PEEK high-pressure capillary tubing, sapphire reciprocating plungers, and reinforced graphite-filled PTFE pump seals. We deliver long-life deuterium and tungsten lamps for SPD spectrophotometric detectors, high-purity quartz cuvettes, deactivated split/splitless inlet liners and graphite ferrules for gas chromatographs, AOC-20i and AOC-30i precision microliter syringes, secondary electron multipliers (SEM) and desolvation capillaries for mass spectrometers, quartz combustion catalyst tubes and platinum catalyst pellets for TOC-L analyzers, as well as hardened wedge grips, extensometers, and digital load cells for Autograph universal testing machines.
Consult with SpareX Analytical Instrumentation Specialists
Submit your target application criteria, required analytical instrument designations, or part numbers. SpareX technical specialists will promptly prepare an engineered commercial offer outlining equipment configurations, warranty conditions, and delivery timelines.
