Equipment and spare partsBrowse manufacturers Search by manufacturerFLOOR CLEANING EQUIPMENT
Source Bennett floor cleaning equipment for warehouse, retail and production areas. Specify the surface, cleaning route and available working time; for parts, attach the model and component photographs.
Compare the walk-behind S510BT and compact ride-on R75 for different access and operating requirements. Review P150 and D200 configurations for other cleaning routines, or P150-85R and H120-75R for combined scrubbing and sweeping.
S510BT Basic is a compact walk-behind scrubber with powered travel. Consider this format where an operator follows the machine through aisles and around obstacles. Send the available passage width, floor surface and cleaning area.
For an existing machine, photograph the complete nameplate and the component that needs replacement; include the suffix Basic in the enquiry.
R75-66D Pro is a compact ride-on scrubber. Its operating format differs from a walk-behind machine, so assess turning areas, doors and the route between cleaning zones before selecting it. Provide a floor plan or photographs showing narrow points.
For a service enquiry, identify the machine version and separate the requested assembly from surrounding brackets, hoses and connectors.
P150-86D Pro includes an ECO mode, soft-start technology and a delayed vacuum-motor function. Keep the complete model designation when requesting equipment or parts. Pro, GT and IoT names should remain separate in a fleet list.
Describe cleaning shifts, the floor finish and the existing charging arrangement so the proposed configuration can be checked against the actual site.
D200-100D Pro belongs to the large Dragoon ride-on family. Bennett describes two vacuum motors and dual air filtration; detergent control DCS and a canopy are listed as options. Specify these items separately in the requested supply scope.
For maintenance, indicate which motor or filter position is involved, with the drawing reference and a photograph of its installed location.
P150-85R Pro combines scrubbing and sweeping. Describe the debris and floor contamination before comparing it with a machine intended primarily for wet cleaning. State whether the route includes loose particles, tracked dirt or vehicle marks.
For replacement brush components, photograph the working element and both attachment ends, keeping the machine nameplate in the same enquiry package.
H120-75R Pro uses a twin floating roller-brush arrangement for combined scrubbing and sweeping. When requesting replacement rollers, state whether the enquiry covers one item or a set. Include photographs of both roller ends and identify their positions on the machine.
For equipment selection, describe the debris, floor joints and access route rather than relying on cleaning area alone.
A brush enquiry should identify the machine and the working element: disc, roller or pad holder. Record the dimensions and photograph the attachment interface. Describe the surface and cleaning task, since floor care requirements matter alongside fit.
If several machines share a maintenance order, list the quantity for each model separately and label the photographs to match those rows.
For squeegee blades, identify the front or rear position and provide dimensions, the hole pattern and a photograph beside the machine nameplate. A complete recovery assembly is a different enquiry from a blade set. List the beam, fasteners, support wheels and hose separately where required.
Describe the symptom and the checks already completed by your maintenance team.
Describe the usable cleaning area rather than only the total building area. Include aisle widths, rack spacing, doors, corners and turning spaces. Mark lifts, thresholds and ramps separately. A dimensioned plan or a short set of route photographs helps compare walk-behind and ride-on formats.
Also explain how the machine reaches the cleaning zone from its parking and service location, including any passage used only during delivery.
Identify the floor material, joint condition and normal contamination. Distinguish loose debris, dust, wet tracks and persistent deposits so that cleaning methods can be compared meaningfully. Provide photographs of a typical area before cleaning and of the most demanding section.
Include any site requirements for cleaning chemicals or floor care, and explain whether different zones require separate routines, tools or operating windows.
Specify the cleaning window, shift pattern and planned stopping opportunities. Identify water filling, drainage and charging points and their distance from the work area. For an existing fleet, include readable photographs of battery and charger labels.
State separately whether the equipment request includes a battery, charger and initial consumables. This produces a clear comparison of supply scopes rather than a comparison based on a machine name alone.
Copy the full nameplate designation, retaining every suffix. Treat a body decal, an old invoice description and a motor label as separate pieces of identification. For several machines, prepare a table with the internal asset number, model, serial number, required item and quantity.
Use the same asset numbers in photograph filenames. This keeps the enquiry traceable when similar-looking machines have different components or operating configurations.
If water remains on the floor, describe the pattern: a continuous strip, separate tracks or water appearing on turns. Include photographs of the blades, beam, hose and tank lid. Record checks already performed by a service technician and the conditions in which the symptom occurs.
Keep suspected causes separate from confirmed purchasing items; a symptom description starts an enquiry but does not identify a replacement part by itself.
A motor request needs its own label, connector and mounting photographs as well as the machine identity. For a control board, provide the assembly reference and readable label information, with photographs of accessible connections. Specify whether a component or a complete assembly is required.
If a service technician has established the failure cause, attach the findings and the proposed replacement list, keeping those findings distinct from untested assumptions.
Photograph both hose ends, connection points and the installed routing. Record length, diameter and any formed sections. For a tank or lid, show the overall shape, attachments and seal location. Identify modifications made during earlier repairs.
List seals, clamps and adapters separately when they are needed with the main item, so a quotation can distinguish the principal assembly from the accessories required to install it.
For planned maintenance, group the list by model and operating location. Separate immediate demand from the stock you want to hold. Define the ordering unit as an individual item, pair or set, and attach an earlier agreed specification for repeat procurement.
Keep similar-looking blades, brushes and filters on distinct lines until their identification is complete. Add internal item references to make receipt and distribution across the fleet easier.
Compare offers against the same list: machine, working tools, battery, charger and additional accessories. Put optional items on separate lines and distinguish mandatory requirements from preferred additions.
If the purchase replaces existing equipment, explain what must be retained, such as the cleaning route, charging arrangements, work process or consumables strategy. A photograph explains the current setup; a written specification provides the basis for checking the proposed replacement.
State the destination, unloading arrangements and the route to the operating location. Provide lift and doorway dimensions if the machine must pass through them. Identify the technical receiving contact in the enquiry and list the required documents and instruction language.
Prepare a receipt checklist linked to the specification, with separate entries for the machine, accessories and consumables. This helps the receiving team reconcile the delivered items with the agreed scope.
Start with an overall machine photograph and a readable nameplate. Add separate views of the requested item, its markings, mounting points and connectors. On a parts drawing, mark the position and quantity while retaining the document title.
For multiple items, use a table and repeat row numbers in filenames. Include your response contact in the form and attach the technical material to the same enquiry so the information stays together.
Provide the cleaning area and route, floor surface, contamination and available working time. Include doorway and turning dimensions and the locations of water and charging points. Specify the machine, battery, charger, working tools and optional accessories as separate items.
Prepare a table listing model, serial number, item, part reference and quantity. For brushes and blades, attach dimensions and mounting photographs; for motors and boards, include readable labels. Define the contents of each set and attach the earlier specification for repeat orders.
Availability, price, lead time, origin, supply scope, documents and warranty are agreed for the specific item. Official dealership and unchecked compatibility are not claimed. Individual service parts and earlier versions require verification against the full designation.
English-speaking contact