Equipment and spare partsBrowse manufacturers Search by manufacturerEQUIPMENT AND COMPONENTS
Allen-Bradley / Rockwell Automation controllers, I/O, terminals and drives. Define a repair or project package using complete catalog numbers, hardware series and firmware.
Choose the product direction by the task, then identify the family and exact execution. A family name starts the search, but quotation requires the actual installation data. The sections below separate principal ranges, service components and inquiry details. For several machines, list them separately with the quantity of each item. Keep a complete unit request distinct from maintenance consumables or an individual replacement component.
ControlLogix 5580 processors include the 1756-L81E through L85E memory choices of 3, 5, 10, 20 and 40 MB. Their embedded EtherNet/IP connection differs from a 5570 arrangement using a communication module. Select an exact processor, not just the ControlLogix name.
Include the chassis, slot, communication modules and project version so that the hardware configuration can be compared.
The 5069-L340ER is a specific example with 4 MB memory, up to 31 local I/O modules and 90 EtherNet/IP devices. It does not provide Integrated Motion; ERM capabilities must not be assigned to ER models. Connection requires a 5069-RTB64-SCREW or 5069-RTB64-SPRING kit.
List the project software version and all required components, including terminal accessories.
Compact 5000 I/O includes standard and safety-related variants. Example codes include 5069-IB16K, 5069-OB16F, 5069-IB8S and 5069-OBV8S. Selection must distinguish inputs from outputs, signal type, channel count and terminal arrangement.
Include the power configuration and the controller or adapter used with the modules. A complete order should identify connection accessories instead of assuming they accompany every module.
ControlLogix documentation identifies communication modules such as 1756-EN2T, EN2TK and EN2TXT for networked devices and distributed I/O. Retain the complete suffix because environmental executions differ.
Provide the existing network drawing, controller and module list, together with the required connections. A replacement should preserve the functions of the installed network and be checked against the applicable firmware documentation.
PanelView Plus 7 Standard and Performance differ in hardware and supported capabilities. The application environment is FactoryTalk View Machine Edition. Retain the complete terminal code and hardware series when requesting replacement or repair.
Include the existing project backup, communication requirements and mounting opening. Screen size alone is insufficient to establish that another terminal will run the installed application.
The 25B-E3P0N104 illustrates one PowerFlex 525 configuration: 1.5 kW, three-phase 525–600 VAC, 3 A, embedded EtherNet/IP and an open IP20 enclosure. These are not universal ratings for the family. Send both drive and motor plates, supply details and operating duty.
Braking, interfaces and installation requirements should be included when defining the complete drive package.
Kinetix 5700 belongs to Bulletin 2198 and includes dual-axis modules such as 2198-D006-ERS3, D012-ERS3 and D020-ERS3. Identify the module code, hardware series and firmware separately. A servo inquiry needs the axis diagram, motor designation and power-bus components.
Treat the drive, motor, feedback and connection package as related selections rather than independently interchangeable items.
CompactLogix 5380 documentation lists 5069-RTB64-SCREW and 5069-RTB64-SPRING connection kits. Kinetix 5700 documentation also identifies connector accessories, including 2198-KITCON-S160. The main device code and a connection photograph help identify the required kit.
State screw or spring termination and the quantities needed; the exact package contents must be checked rather than inferred from an accessory family name.
Compact GuardLogix 5380 includes different safety-related configurations. Their capabilities depend on the documented architecture and exact hardware, not the family label alone. Provide all suffixes, hardware series and the existing project context.
Any change to the safety application, validation or acceptance of machine functions requires its own engineering scope; a component quotation does not replace those activities.
Record CAT, SER and FW exactly as shown on the label, including letters and separators. Add the version of Studio 5000 or other engineering software used with the device. The Product Compatibility and Download Center supports documented compatibility checks.
Before replacing hardware, the responsible specialist should preserve the project and settings; an identical catalog number may still require version planning.
The product page for 1756-L83EP announces discontinuation on 31 December 2026 and identifies 1756-L83EPXT as a replacement. This statement applies to that particular code, not to all ControlLogix 5580 controllers.
For older equipment, provide the installed designation, project version and permitted modernization scope. A suggested successor still needs checking against the actual system and environment.
Send a clear view of the device and its complete label. Mark the required position in a cabinet containing similar modules, and state the quantity and connector requirements. An earlier bill of materials can help reproduce the installed configuration.
When a suffix or revision cannot be read, identify the missing detail explicitly rather than shortening the code and risking a different execution.
Separate restoration of an existing function from a project that changes machine capabilities. List retained interfaces, I/O modules, terminals and software, together with downtime and cabinet constraints. The equipment list and engineering services should appear as separate scope items.
This allows a replacement package to be discussed without implying that programming, commissioning or safety acceptance is automatically included.
For a cabinet package, list controllers, modules, terminals, drives, connectors and power components by position. Preserve each complete code, series and quantity, and mark the devices that remain in use. Distinguish a storage spare from a replacement that must be commissioned.
The latter also needs the project, settings and a responsible configuration specialist. For migration, state downtime limits and the programs and interfaces to retain.
A suitable catalog item does not mean engineering work is complete; equipment and configuration should be defined as separate scopes.
These items appeared in previous quotations; this is not evidence of completed delivery or current stock.
Start with Catalog Number, Series, Revision, Firmware, controller and I/O list, motor data, interfaces and engineering software version. Attach the specification or the existing equipment documentation and identify mandatory characteristics separately from preferences.
If a nameplate and an earlier purchase list differ, provide both rather than combining their codes. For a new installation, describe the process and available utilities; for replacement, state which dimensions and interfaces must remain unchanged.
Indicate normal operation and any distinct starting, peak or cleaning conditions relevant to the equipment. A photograph should show the full label and the connection area, with a separate overall view. Mark the required position on an assembly drawing when several similar components are present.
These inputs allow the requested configuration to be distinguished from neighboring versions before price and supply scope are discussed.
For service, retain the complete machine and part designations, drawing position and quantity. Separate mandatory items from optional accessories, and state which installed components will remain in use.
A photograph of an earlier kit label can help, but the package contents must still match the current requirement. When several machines are involved, list their serial numbers and quantities individually instead of assuming one set fits every execution.
Describe any changes made since the original installation. A component quotation, a complete equipment package and diagnosis or repair are different scopes. Identify required documents and packaging before the order, and keep installation or configuration services as separate items.
This makes the final list reviewable and avoids leaving the content of a supposed complete kit undefined.
Send the complete designation, quantity and destination, together with photographs and available documentation. Use separate lines for multiple items and preserve every suffix. If an alternative is acceptable, define what may change and what must remain the same. Availability, price, lead time and suitability are determined for the specific inquiry. We are neither an authorized dealer nor the manufacturer’s representative.
English-speaking contact