Temposonics / MTS Sensors position and level sensors
Magnetostrictive position sensors and liquid level transmitters for industrial axes, hydraulic cylinders and process vessels. Specify the stroke, output and installation arrangement.
R-Series V position sensors
RH5 is the rod model for cylinder mounting. RP5 uses a profile housing along a motion axis. Match the position magnet, stroke and controller interface when specifying a replacement.
- RH5 rod
- RP5 profile
- RD5 remote electronics
- Analog or SSI output
G-Series V position sensors
GH5 rod sensors and GP5 profile sensors provide position feedback. G-Series V offers analog and pulse output options. For earlier G-Series replacements, confirm pin assignments and scaling.
- GH5 rod
- GP5 profile
- PWM option
- Start/Stop option
Compact E-Series and GB-Series sensors
E-Series covers compact sensors for industrial axes. GB-Series targets tight mounting spaces and elevated temperatures. Check the housing drawing and magnet travel envelope before choosing the replacement.
- E-Series sensors
- GB-Series sensors
- Compact installation
- Position feedback
T-Series sensors for hazardous areas
T-Series sensors are designed for hazardous area applications. A replacement calls for verification of the individual sensor marking and connection. Compare the site requirements with the documents for the selected model.
- T-Series sensors
- Position measurement
- Model-specific marking
- Connection review
MH-Series and C-Series hydraulic sensors
MH and C magnetostrictive sensors measure the stroke of mobile hydraulic cylinders. Select the design with the cylinder layout and rod travel in view. Check clearance at the external connector when replacing an installed sensor.
- Mobile hydraulics
- Rod stroke
- MH-Series sensors
- C-Series sensors
C-Series sensors for compact machines
C-Series is intended for volume production of compact equipment. The sensors fit assemblies with limited room along the axis. Select the protective housing according to the mounting position within the machine.
- OEM production
- Small assemblies
- C-Series sensors
- Housing options
LP-Series and LL-Series level transmitters
Magnetostrictive transmitters measure liquid level in storage tanks and process vessels. LP covers demanding applications, while LL covers standard duties. Check the float, probe length and process connection on a replacement.
- LP transmitters
- LL transmitters
- Tank level gauging
- Float selection
Replacement for R-Series and MTS Sensors units
Selected earlier R-Series units remain available for existing installations. The range includes CANbus and PROFIBUS variants. Compare the full ordering code and network description with the controller project before selecting a substitute.
- R-Series sensors
- CANbus variants
- PROFIBUS variants
- Ordering code check
Selecting a position sensor
For in-cylinder installation, confirm the usable stroke, mounting depth, thread geometry and room for the piston magnet. For an external axis, check profile housing clearance, the magnet carrier and cable routing at either end of travel.
Specify the output and mounting arrangement alongside the measuring range.
Matching the controller
List the input module or network in use and the sensor power supply. Compare the network description with the control project for the exact variant. For a legacy replacement, check scaling, count direction and the controller response to an invalid measurement before commissioning.
Specifying a liquid level transmitter
Provide process liquid information, vessel type, operating level range and process connection. The float must suit the liquid and fit the nozzle during installation.
For interface measurement, identify both liquids so the proposed sensing arrangement can be reviewed against the specific model documentation.
Temposonics / MTS Sensors and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Temposonics / MTS Sensors and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
