Bourns / Bourns, Inc. Electronic Components, Sensors and Parts

Bourns / Bourns, Inc. resistor arrays (CAY16), current shunts (CRF), Trimpot potentiometers, TVS/PPTC/GDT protection, encoders and shielded power inductors for industrial OEMs.

CAY16 / CAT16 Resistor Arrays and CRF Shunts

Bourns CAY16 convex and CAT16 concave chip resistor arrays span 10 ohms to 1 megohm across 2, 4 or 8 isolated elements. CRF metal alloy current sense chip resistors reach 0.0003 ohm and 3 W with under 5 nH inductance. Replaceable SMD assemblies serve motor drives and power boards.

  • CAY16/CAT16: 10 Ω – 1 MΩ, ±1 % / ±5 %
  • CRF0805–2512: from 0.0003 Ω, up to 3 W
  • TCR: ±200 PPM/°C (CAY16), ±50 ppm/°C (CRF)
  • Temp: -55 °C to +125 °C / +170 °C (CRF)

Trimpot 3296 and 3362 Trimming Potentiometers

Bourns 3296 (25-turn, 3/8-inch square) and 3362 (single-turn, 1/4-inch square) sealed cermet Trimpot potentiometers span 10 ohms to 2 megohms at 0.5 W and -55 °C to +125 °C for board-level calibration. Chevron seals withstand immersion cleaning and 100 G shock on industrial boards.

  • Resistance: 10 Ω to 2 MΩ, ±10 % std.
  • Power: 0.5 W at 70 °C, 900 VAC dielectric
  • Travel: 25 turns (3296), 240° (3362)
  • Styles: 3296P/W/X/Y/Z, 3362P/W/X/Z

3590 Precision 10-Turn Wirewound Potentiometers

Bourns 3590 bushing-mount wirewound potentiometers deliver 3600° electrical travel and ±0.25 % independent linearity for industrial HMI panels. Resistance spans 200 ohms to 100 kilohms at 2 W (+40 °C) and 1,500 VAC dielectric strength. Replaceable units offer metal or plastic shafts.

  • Resistance: 200 Ω to 100 kΩ, ±5 % tol.
  • Independent linearity: ±0.25 %, 3600°
  • Power: 2 W @ +40 °C, 1,500 VAC sea level
  • Parts: bushing, AR pin, solder/PC pins

SMBJ 600 W Transient Voltage Suppressor Diodes

Bourns SMBJ surface-mount TVS diodes in DO-214AA (SMB) packages handle 600 W peak pulse dissipation (10/1000 µs) from 5 V to 495 V standoff. Response under 1 ps protects industrial I/O buses per IEC 61000-4-2, -4 and -5. Both unidirectional A and bidirectional CA parts are available.

  • Peak pulse power: 600 W (10/1000 µs)
  • Standoff voltage: 5 V to 495 V VRWM
  • Response: < 1 ps (A), < 5 ps (CA)
  • Package: DO-214AA (SMB), -55 to +150 °C

Multifuse MF-R and MF-MSMF PPTC Resettable Fuses

Bourns Multifuse MF-R radial-leaded PPTC devices cover 16 V to 60 V and 0.05 A to 11.00 A hold current with UL 94V-0 epoxy insulation. MF-MSMF 1812 SMD resettable fuses add ENIG terminals, AEC-Q200 options and TUV IEC 62319-1 approval. They serve as replaceable board protectors.

  • MF-R radial: 16–60 V max, 0.05–11.0 A Ihold
  • MF-MSMF 1812 SMD: ENIG pads, AEC-Q200
  • Standards: UL 94V-0, cUL, TUV IEC 60738-1
  • Replaceable overcurrent board elements

2027 Series 2-Pole Gas Discharge Tubes (GDT)

Bourns 2027 2-pole gas discharge tubes (8 mm diameter, 6 mm length) span 75 V to 600 V DC sparkover and handle 25,000 A (8/20 µs) surge discharge. Capacitance below 1 pF preserves signal integrity. Units meet ITU-T K.12, IEEE C62.31 and IEC 61643-311 standards.

  • DC sparkover: 75 V to 600 V @ 100 V/s
  • Surge rating: 25 kA (8/20 µs), 65 Arms AC
  • Capacitance < 1 pF, insulation > 1 GΩ
  • Dimensions: 8 mm dia x 6 mm, UL Recognized

EMS22A Magnetic and PEC11R Incremental Encoders

Bourns EMS22A non-contacting magnetic absolute encoders deliver 1024-position resolution on 3.3 VDC or 5.0 VDC supply with CMOS/TTL output. Compact 12 mm PEC11R incremental encoders provide 2-bit quadrature code and IP40 sealing. PEC11R supports 30,000 rotational cycles and push switches.

  • EMS22A: 1024 positions, 3.3 / 5.0 VDC, 20 mA
  • PEC11R: 2-bit quadrature, 10 mA @ 5 VDC
  • PEC11R durability: 30,000 cycles, IP40
  • Parts: metal shafts, mounting nuts, washers

SRP7028A and SRR1260 Shielded Power Inductors

Bourns SRP7028A carbonyl powder core shielded inductors span 0.10 to 33 µH up to 32.5 A Irms and 60 A Isat with AEC-Q200 qualification. SRR1260 shielded SMD inductors cover 1.0 to 1000 µH in E12 values for DC-DC converters. Both lines remain distinct from the J.W. Miller catalog.

  • SRP7028A: 0.10–33 µH, 32.5 A Irms, 60 A Isat
  • SRR1260: 1.0–1000 µH (E12), 9.4 A max Irms
  • SRP7028A temp: -55 °C to +150 °C, 50 V rated
  • Core: carbonyl powder, shielded SMD construction

OEM Selection Guide for Bourns / Bourns, Inc. Components

We support OEM selection across Bourns / Bourns, Inc. resistive, circuit protection, sensor and power magnetic lines by verified datasheet ratings, package footprint and environmental limits.

For industrial and automotive designs, we match AEC-Q200 options (CRF, MF-MSMF, SRP7028A), surge ratings per IEC 61000-4-5 and ITU-T K.12 (SMBJ, 2027), and Trimpot pin styles (3296P/W/X/Y/Z, 3362) separately from J.W. Miller chokes.

Board-Level Cross-Checking and Mechanical Compatibility

Before ordering replacement arrays or encoders, engineers verify convex vs. concave terminations (CAY16 vs. CAT16), 3.3 V or 5.0 V supply levels on EMS22A, quadrature detent torque on PEC11R, and saturation current Isat on SRP7028A inductors.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.