KBB Turbo turbochargers
Specify KBB turbochargers for marine engines, generator sets and rail applications. Request a complete unit or spare parts matched to your equipment.
ST27-EP turbochargers
The ST27-EP family provides single-stage turbocharging for medium-speed engines. KBB lists a 500–6,000 kW engine output range per unit and a maximum compressor pressure ratio of 6.0. Sizes ST3-EP through ST7-EP cover different air-flow and output ranges.
- 500–6,000 kW
- Radial turbine
- Single-stage charging
- ST3-EP through ST7-EP
HPR turbochargers
HPR is a single-stage family for medium-speed engines, covering 500–3,000 kW per unit. KBB lists propulsion engines, auxiliary engines, generating stations and rail vehicles among its applications. A replacement cartridge must match the unit specification and serial number.
- 500–3,000 kW
- Single-stage charging
- Radial turbine
- HPR5000 cartridge
K2B two-stage system
K2B is a two-stage turbocharging system with a maximum pressure ratio of 10:1. KBB lists main propulsion engines, auxiliary engines and generator stations as applications. Design integration and the control strategy must be specified for the engine installation.
- Two-stage charging
- Pressure ratio up to 10:1
- Propulsion and auxiliary engines
- Application engineering
M40 turbochargers
The M40 has an axial turbine. The KBB range table lists 900–1,800 kW and a pressure ratio of up to 4. The manufacturer shows an M40 replacement cartridge among its spare parts, and suitability should be checked against the original unit specification.
- 900–1,800 kW
- Axial turbine
- Pressure ratio up to 4
- M40 cartridge
Spare parts and overhaul kits
KBB supplies turbine nozzle rings, plain bearings, rotors, cartridges and service kits. The manufacturer asks for the turbocharger type, specification and serial number when identifying parts. For a dismantled unit, include the inspection report and the readable markings from the parts removed.
- Turbine nozzle rings
- Plain bearings
- Rotors
- Overhaul kits
K2S cartridge exchange
The K2S programme covers replacement cartridges or complete turbochargers on an exchange basis. KBB lists HPR, ST27 and K2B as applicable series. Identify the installed unit and specify whether the enquiry concerns a cartridge or a complete turbocharger.
- HPR, ST27 and K2B
- Cartridge exchange
- Complete unit exchange
- Specification check
Turbocharger retrofit
KBB lists retrofit applications between 500 and 6,000 kW per turbocharger. Replacement involves selecting and adapting the new unit to the existing engine. Submit the current engine configuration, duty profile and the intended scope of the retrofit for engineering review.
- 500–6,000 kW
- Turbocharger selection
- Engine matching
- Interface review
Turbocharger inspection and overhaul
Define the overhaul scope after inspecting the rotor, bearings and turbine nozzle ring. Provide the nameplate, the circumstances of the fault and the findings from the last inspection. For planned work, specify the unit configuration before selecting service kits or special tooling.
- Rotor inspection
- Bearing assessment
- Nozzle ring inspection
- Latest maintenance report
Marine propulsion and auxiliary engines
For a marine project, provide the manufacturer, model and duty of the engine. A propulsion engine enquiry benefits from separate profiles for transit and manoeuvring. For an auxiliary engine, describe how the generator is loaded and how often it operates under those conditions.
Include the installed turbocharger nameplate whenever the project replaces an existing unit.
A product series narrows the initial selection. Air flow, pressure ratio and installation details determine the specific configuration. Submit the operating point from the engine project file where available.
When the original documentation is incomplete, supplement it with the actual load profile and clear information about air and exhaust connections.
Turbocharging for generator sets
Separate engine shaft output from the electrical output of the generating set in your enquiry. Record the fuel and operating mode, including prime power, standby operation or demand that changes regularly.
Two installations with the same nameplate output can operate under substantially different duty conditions.
Include the load requirements and constraints imposed by connected systems. For a new installation, provide the available space and the arrangement of the intake and exhaust connections.
When the purchase follows a failure, include the findings from the last shutdown and photographs of the interfaces on the installed turbocharger.
Single-stage and two-stage charging
ST27-EP and HPR are single-stage families. A K2B application requires engineering for both stages, their arrangement and the control strategy. To assess suitability, include the engine charging requirement, operating points and installation constraints.
For a new project, a drawing showing the engine and connected air-system components helps define the integration work.
For a retrofit, identify the original turbocharger and document operating conditions before the change. Describe which operating modes need adjustment and which parts of the installation must be retained.
That information makes it possible to assess interfaces, service access and replaceable components as part of the complete installation.
Checking interfaces before replacement
Provide the mounting arrangement, housing orientation and lubrication connections when replacing a turbocharger. Include dimensions or photographs from both the exhaust and charge-air sides.
If several identification plates or markings are visible, distinguish the assembly nameplate from markings on individual components.
Match the engine installation documents to the proposed equipment specification before procurement. A change from HPR to ST27-EP calls for confirmation of the installed configuration and space restrictions.
Describe the new turbocharger, any adapter parts and engineering support as separate items so each element can be checked in the quotation.
Spares for a fleet of engines
Prepare a serial-numbered parts list for enquiries covering several engines. Include the turbocharger type, specification and serial number against each item.
The family name helps to organise the request, while the suitability of a rotor, bearing or cartridge depends on the actual configuration of the installed unit.
Separate scheduled service parts, contingency stock and parts whose need still depends on inspection. This makes equipment quotations easier to compare when some installations require a complete cartridge and others require repair of the existing group.
For K2S exchange enquiries, indicate the condition and completeness of the cartridge proposed for return.
Preparing the equipment enquiry
Provide the destination country and city, engine duty and the commissioning date or maintenance window. State whether the enquiry covers a complete turbocharger, a service kit or itemised spare parts.
For an installed machine, attach the nameplate photographs and the latest service documentation available.
Include engine operating points and interface drawings for a new build or a conversion to a different model. Identify the documents required for technical approval of the equipment.
Commercial terms and delivery availability can then be confirmed for the specified configuration, quantity and destination.
Defining the equipment package
One enquiry may cover the turbocharger itself, connecting components and an initial service stock. List what is already on site and what should arrive with the equipment. Identify which items will be retained, supplied by the installation contractor or included in the equipment order.
For a replacement project, an interface drawing helps prevent duplicate orders for mounting or adapter parts.
Record which document governs the final configuration and identify the revision of every drawing. Label each drawing as an existing or proposed installation. When several engines are involved, distinguish common equipment requirements from differences in the individual units.
Delivery planning and installation
If installation requires an engine shutdown, give the installation window and the time needed for delivery to the final site. For a vessel, identify the delivery port and expected call date.
For a stationary plant, record unloading conditions, site access arrangements and whether equipment must reach the engine room itself.
Set out the incoming inspection requirements separately. A handover package can include the packing list, the new unit's nameplate data and the itemised scope of supply. For parts orders, state whether documentation is needed per group of items or per consignment.
This gives the project buyer a clear basis for comparing the proposed scope.
Incoming inspection and equipment records
Check the equipment markings against the agreed configuration on arrival. When several units share the same commercial model name, record the individual serial numbers and link each unit to its documentation.
If equipment enters storage before installation, record which engine or line the unit is intended for.
Agree which dimensions and connections the installation team must confirm before taking the engine out of service. If a dimension or marking differs from the order, collect a photograph, the relevant drawing and the measured value.
An exact record helps determine whether the issue concerns selection, delivered scope or a change at the installation site.
Kompressorenbau Bannewitz and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Kompressorenbau Bannewitz and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Guascor Energy
- Equipment and parts for Peter Brotherhood
- Equipment and parts for Maintenance Partners
