ISHIGAKI Filter Presses and Screw Presses

ISHIGAKI equipment: LASTA ISD/ISF, ISDG, MCDG and IMD/IMF filter presses, ISGK screw presses, IDF vacuum drum filters and FW fiber media filters. Selection by specification.

ISD/ISF LASTA Filter Presses for Sludge

LASTA ISD/ISF is a filter press with a traveling filter cloth system that opens all plates at once. Filtration area is 8–269 m², diaphragm compression 0.7–2.9 MPa. Even thin 2–3 mm cakes discharge automatically, all cloths are washed together, and the top feed port supports cake washing.

  • Filtration area: 8–269 m²
  • Compression: 0.7–2.9 MPa
  • Thin cake: 2–3 mm
  • Municipal and industrial sludge

ISDG LASTA Large Filter Presses

ISDG is a high capacity LASTA filter press with a mechanical plate shift drive, up to 3 times faster than a standard hydraulic cylinder system per the maker. No long stroke cylinder is needed, and required space drops by over 20 %. Filtration area is 109–800 m², compression 0.7–2.0 MPa.

  • Filtration area: 109–800 m²
  • Compression: 0.7–2.0 MPa
  • Plate shift: up to 3× faster
  • Space: over 20 % less

MCDG Filter Presses for Concentrates

MCDG is a LASTA filter press for mineral concentrates: all plates are linked for rapid open and close, all cloths are washed together, and there are fewer moving parts. Filtration area is 72–800 m². Per the LASTA MC catalogue one person changes a chamber cloth in a few minutes without tools.

  • Filtration area: 72–800 m²
  • Copper, zinc, iron concentrates
  • Cloth change: one person
  • Plates: linked together

IMD/IMF Fixed Cloth Filter Presses

IMD/IMF is a LASTA filter press with fixed cloth and individual plate shift, which keeps the machine compact. The cloth is mounted on each plate separately and is easy to replace; cake washing runs from the chamber middle. Uses: chemical, pharmaceutical, paper and pulp, ceramics, mining.

  • Plate shift: one by one
  • Cloth: mounted on each plate
  • Cake wash: from chamber middle
  • Chemical and pharmaceutical

ISGK Screw Presses for Sludge

ISGK is a screw press for continuous dewatering of sewage, industrial waste and sedimentation sludge. The screw shaft normally turns at 0.1–2 rpm, so there is no noise or vibration. It uses a metallic screen instead of filter cloth, and the main drive motor is of energy saving design.

  • Screw shaft: 0.1–2 rpm
  • Filter: metallic screen
  • Drive: energy saving motor
  • Developed: 1990

IDF Vacuum Drum Filters

IDF is a vacuum drum filter for continuous dewatering. Slurry is drawn onto the cloth by a suction pipe inside the drum, a discharge roller removes the cake, the cloth is washed on both sides, and an EPC roller corrects cloth deviation. Uses: steel, nonferrous metal, fiber, electric, paper.

  • Suction: pipe inside drum
  • Cake discharge: roller
  • Cloth wash: both sides
  • Cloth tracking: EPC roller

FW Fiber Media Filters (IFW)

FW (Fiber Wakishimizu, model IFW) is a rapid water filter with floating fiber media: raw water enters from the bottom and leaves from the top. When the pressure gauge signals, an agitator starts and the media is washed with raw water. The unit has a 3–5 times smaller footprint than a sand filter.

  • Footprint: 3–5× smaller
  • Media: floating fiber
  • Media wash: agitator
  • Industrial and sea water

FLOOD BUSTER Pump Gates

FLOOD BUSTER is a horizontal submersible pump in a pump gate that runs at any water level. It switches itself between three operation states, including air-water mixed operation, to prevent frequent start and stop. Debris sized 20 % of the pump diameter passes. 164 pumps have been delivered.

  • Pump diameter: up to 1,350 mm
  • Capacity: up to 4.25 m³/s
  • Head: up to 9 m
  • Delivered: 164 pumps

Selecting ISHIGAKI Filter Presses and Screw Presses

For municipal and industrial sludge there are LASTA ISD/ISF filter presses with traveling filter cloth: filtration area 8–269 m², compression pressure 0.7–2.9 MPa. For large flows there is ISDG at 109–800 m² with a mechanical plate shift drive, and for mineral concentrates MCDG at 72–800 m².

For chemical, pharmaceutical and ceramics duties with cake washing there is IMD/IMF with fixed cloth. For continuous sludge dewatering without cloth there is the ISGK screw press, for steel and paper plants the IDF vacuum drum filter, and for water polishing the FW fiber media filter.

Processes and Industries

Industrial ISD and ISDG units handle agricultural products and fermentation, gypsum, kaolin, cement, pigments and dyes, resins, as well as mineral concentrates, leaching and tailing. MCDG is designed for copper, zinc, iron, platinum and gold concentrates.

FW serves industrial, sea and rain water and advanced sewage treatment, with a 3–5 times smaller footprint than a sand filter. FLOOD BUSTER pump gates with horizontal submersible pumps drain storm water: pump diameter up to 1,350 mm, capacity up to 4.25 m³/s, head up to 9 m.

ISHIGAKI Company

ISHIGAKI COMPANY, LTD. was founded in 1958 on Shikoku Island as ISHIGAKI SEISAKUSHO and from 1960 to 1996 was named ISHIGAKI MECHANICAL INDUSTRY CO., LTD. The head office is in Tokyo. The company makes filters, separators, pumps and related equipment.

The LASTA ISD type filter press was developed in 1972 and the ISGK screw press in 1990. The Chinese subsidiary in Suzhou was set up in 2004, and in Japan the subsidiary ISHIGAKI MAINTENANCE handles service and installation.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.