transfluid Maschinenbau tube processing machines

t bend bending, t form forming, t cut cutting and automated cells. Select equipment for the tube material, geometry and process sequence.

t bend right/left bending

Servo-electric t bend machines bend tubes to the right and left. The overview specifies tube diameters of 6–60.3 mm for this configuration. A free-form bending function is also available.

  • Tube diameter 6–60.3 mm
  • Right and left bending
  • Servo-electric drive
  • Free-form option

Servo-electric t bend machines

The servo-electric t bend range covers tube diameters of 6–150 mm. These machines use fully electric drive technology. CNC axis parameters can be programmed to adapt the bending process.

  • Tube diameter 6–150 mm
  • Electric drive technology
  • Programmable axes
  • Quick-change tooling

Servo-hydraulic t bend machines

The servo-hydraulic t bend range handles tube diameters of 6–325 mm. The manufacturer highlights the rigidity of this machine configuration. Bending can be incorporated into automated production.

  • Tube diameter 6–325 mm
  • Servo-hydraulic drive
  • Rigid machine structure
  • Automation options

t form tube-end forming

FLARELINE produces sealing surfaces by rotary forming. MULTILINE combines forming, cutting, trimming and thread rolling. BOOSTLINE provides axial forming, while COMBILINE joins axial and rotary processing.

  • FLARELINE: up to 115 mm
  • BOOSTLINE: up to 1,300 kN
  • BOOSTLINE: up to eight stages
  • COMBILINE: two methods

t cut ROTOLINE orbital cutting

ROTOLINE separates tubes with rotating blades and a chipless process. Two clamping units pull the tube apart during separation. Feeding options include a magazine or coil feed with a straightening unit.

  • ROTOLINE 28: 6–28 mm
  • ROTOLINE 50: 6–50 mm
  • ROTOLINE 80: 20–80 mm
  • ROTOLINE 100: 20–100 mm

TPC 628 compact production cell

TPC 628 integrates blank preparation, tube-end forming and bending. The cell processes copper up to 28 mm and stainless steel up to 22 mm. Feed configurations accept straight tube blanks or coil material.

  • Copper: up to 28 mm
  • Stainless steel: up to 22 mm
  • Right/left mandrel bending
  • Tube-end processing

Machine selection and process sequence

Machine selection depends on tube geometry, material, wall thickness and the order of operations. The right/left, servo-electric and servo-hydraulic t bend ranges have different diameter limits. A maximum for one range does not describe every machine in the family.

Part geometry, bend radius and tooling clearance must be checked for the chosen configuration.

Tube-end processing before bending requires a different arrangement from processing after bending. TPC 628 combines operations in a compact cell, while separate t form and t cut machines support other layouts. A SpareX quotation covers the selected equipment, tooling and agreed peripheral units.

Forming method and surface requirements

FLARELINE uses rotary forming for sealing surfaces. MULTILINE combines forming, cutting, trimming and thread rolling. BOOSTLINE is an axial forming range; COMBILINE brings axial and rotary methods together. The method determines the tool and the sequence used to create the end contour.

Dimensional tolerance, sealing profile and tube material must be considered with the joint drawing. Forming force up to 1,300 kN and up to eight stages refer to BOOSTLINE rather than every t form machine.

Cutting, feeding and integration

ROTOLINE uses rotating blades and two clamping units that pull the tube apart during separation. With coil material, straightening and transport also participate in length positioning. Straight tube blanks require a different loading arrangement.

t motion loading systems include tables, belt and chain conveyors, step feeding and alignment. Tubes with formed ends or attached components require controlled orientation. In TPC 628, processing the second end depends on tube geometry.

transfluid Maschinenbau and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of transfluid Maschinenbau and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.