Philadelphia Gear High-Speed, Low-Speed and Cooling Tower Gearboxes

Philadelphia Gear (Timken Power Systems, USA): high-speed compressor and turbine gearboxes, low-speed gearboxes, cooling tower drives, Synchrotorque clutches and the Western Gear, WesTech and Hamilton Gear lines.

High-Speed Compressor Gearboxes

Philadelphia Gear high-speed gearboxes drive compressors, pumps, test stands and gas turbines. Shafts run in split, steel-backed, Babbitt-lined journal bearings with aluminum labyrinth seals, and units are built to API standards as required. Units in service reach ratings up to 80,000 hp.

  • Unit rating: up to 80,000 hp
  • Shaft speed: up to 70,000 rpm
  • Pitch line velocity: over 35,000 ft/min
  • Bearings: Babbitt-lined journal

High-Torque Low-Speed Gearboxes

Philadelphia Gear low-speed gearboxes use horizontally or vertically offset parallel shafts and single to quintuple reductions. Bevel, bevel-helical and bevel-planetary arrangements come with helical, double helical, herringbone or worm gearing. Uses include vertical roller mill pulverizer drives.

  • Reductions: single to quintuple
  • Layout: bevel-planetary option
  • Gearing: herringbone or worm
  • Lubrication: splash or force-fed

Cooling Tower Fan Gearboxes

Single and double reduction cooling tower fan gearboxes use spiral bevel gears cut by the continuous indexing cyclo-palloid method. Shafts are heat-treated alloy steel; tapered roller bearings meet AGMA and CTI standards. Single reduction units come in 15 sizes, double reduction units in five.

  • Single reduction: 550–7,100 lb thrust
  • Double reduction: 3,000–22,000 lb thrust
  • Option: sprag-type backstop
  • Option: oil immersion heater

Synchrotorque Hydroviscous Clutches

Synchrotorque clutches transmit torque in proportion to a variable clamping force; at full lock-up the output speed equals the input speed with no fixed-slip losses. They suit 100 to 20,000 hp drives. The Mark 8 digital controller, which replaces the Mark VII and earlier versions, runs them.

  • Drive rating: 100 to 20,000 hp
  • Output: up to 100% of input speed
  • Controller: Mark 8
  • Mark series: since 1969

Hamilton Gear H Line and S Line

Philadelphia Gear holds the Hamilton Gear design records and continues its lines. H Line: parallel shaft, single to triple reductions, ratios 1.246 to 281.475. S Line: right-angle spiral bevel, double to quadruple reductions, ratios 5.027 to 1,186. Worm units have 2–18 in center distances.

  • H Line torque: over 1,234,000 lb-in
  • S Line torque: over 4,000,000 lb-in
  • Worm units: up to 492,000 lb-in
  • Worm ratios: 5:1 to 4,900:1

Western Gear and WesTech Gearboxes

Philadelphia Gear holds the drawings of Western Gear and its successor WesTech. Western Gear: Speedmaster 3000 and 4000 high speed units, Torqmaster 7000 and 8000 reducers, right-angle Torqmaster 9000. WesTech: 10000 and 30000 high speed series, 2400, 2500, 20000 cooling tower drives, Pumpmaster.

  • WesTech 10000 series: 67 models
  • 10000 series: 27 frame sizes
  • Pumpmaster: 11 models
  • WesTech marine: 750–75,000 hp

Open Gearing and Precision Gears

Philadelphia Gear makes gears and pinions to print or by reverse engineering: precision tooth grinding, hobbing, shaving and lapping. Internal spur and helical gears reach 157 inches in diameter and pitch to 0.5 D.P. (50 module). Gear grinding covers bull gears up to 100 inches in diameter.

  • Quality: AGMA levels 8 to 15
  • Internal gears: up to 157 in
  • Pitch: to 0.5 D.P. (50 module)
  • Grinding: gears up to 100 in

CORE Magnetic Oil Filters

CORE (Continuous Oil Rescue Equipment) is a magnetic gearbox oil filter: annular magnets shrouded by steel plates with flow channels pull ferrous wear particles as small as one micron out of the oil without a significant pressure drop. Filters install upstream of the pump in aluminum housings.

  • Particles: down to 1 micron
  • Magnets: 50-year half-life
  • Housing: aluminum
  • Mounting: upstream of the pump

Selecting Philadelphia Gear Gearboxes

Philadelphia Gear (Timken Power Systems, USA) engineers gearboxes for the specific machine: high-speed units for compressors, pumps and gas turbines, low-speed units with single to quintuple reductions, single and double reduction cooling tower fan drives and pump drives.

Since 1960 the company has produced over 4,000 pump and compressor gearboxes, mostly for pipelines.

Pump gearboxes are fitted with custom pin- and ramp-style backstops that prevent damage from reverse rotation. For speed control without fixed-slip losses, Synchrotorque hydroviscous clutches with the Mark 8 controller are used.

Gearbox Testing and Maintenance

Philadelphia Gear test stands run full load simulations to 60,000 hp. High-speed gearboxes are tested at full speed with analysis of vibration, sound levels, lubrication and gear mesh frequencies. The Mark 8 controller adjusts Synchrotorque clutch clamping pressure electro-hydraulically.

The manufacturer also repairs other brands, including Falk, Lufkin, Flender, Rossi, Siemens and Sumitomo. The CORE magnetic filter removes wear particles as small as one micron.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.