Lio Shing turrets and spare assemblies
Source hydraulic, servo and powered Lio Shing turrets for lathes. We match the configuration, tool disc and spare assemblies to your machine requirements.
Hydraulic turrets LS-100, LS-120 and LS-160
A hydraulic motor indexes the tool through a parallel cam mechanism. Hydraulic power operates clamping and release. The motor, coupling and tool disc are selected against the turret configuration.
- LS-100: centre height 50 mm
- LS-120: centre height 63 mm
- LS-160: centre height 80 mm
- OMM50 hydraulic motor
Hydraulic turrets LS-160A, LS-200 and LS-240
These models retain cam indexing and hydraulic clamping. Centre height and drive configuration distinguish the sizes. Replacement selection covers the hydraulic motor, locating coupling and tool disc mounting.
- LS-160A: centre height 80 mm
- LS-200: centre height 100 mm
- LS-240 and LS-240A: centre 120 mm
- 8, 10 or 12 tool positions
Hydraulic series LS-250H, LS-320 and LS-400
The catalog places LS-250H, LS-320, LS-400A and LS-400 in the hydraulic family. LS-320 and LS-400 use different motors and disc dimensions. Centre height, weight and machine mounting geometry govern replacement selection.
- LS-320: centre height 160 mm
- LS-400A and LS-400: centre 200 mm
- LS-320: WP250 hydraulic motor
- LS-400A and LS-400: WP315 motor
Servo turrets LS-100SV, LS-120SV, LS-160SV and LS-200SV
A servo motor rotates and indexes the turret. The model tables identify motors and locating couplings for each size. Motor compatibility, reduction ratio and the clamping circuit need to match the machine integration.
- LS-100SV: centre height 50 mm
- LS-120SV: centre height 63 mm
- LS-160SV: centre height 80 mm
- LS-200SV: centre height 100 mm
Servo turrets LS-240SV, LS-250SV and LS-320SV
The SV family includes several centre heights for lathe integration. Servo drive provides rotation and position selection. Locating couplings and tool discs are selected individually for the required turret size.
- LS-240SV: centre height 120 mm
- LS-250SV: centre height 125 mm
- LS-320SV: centre height 160 mm
- 8, 10 or 12 tool positions
Powered turrets LS-120SP, LS-160SP, LS-200SP and LS-250SP
Servo drive indexes the turret while a separate motor powers the driven tool. VDI size and drive connection vary across the SP family. Holder selection matches both the shank and the transmission interface of the model.
- LS-120SP: VDI20 tooling
- LS-160SP: VDI30 tooling
- LS-200SP: VDI40 tooling
- LS-250SP: VDI50 tooling
Powered turrets LS-100DBR, LS-160DBR, LS-200DBR and LS-250DBR
The DBR family combines servo indexing with driven tooling. LS-100DBR uses a smaller tool interface. Larger models offer VDI and BMT configurations, so the holder must match the selected disc and drive arrangement.
- LS-100DBR: VDI16 shank
- LS-160DBR: VDI30 or BMT55-ER25
- LS-200DBR: VDI40 or BMT65-ER32
- LS-250DBR: VDI50, BMT65 or BMT75
Turrets LS-160DTR, LS-200DTR, LS-250DTR and LS-160BSP
DTR and BSP belong to the powered turret range. DTR offers VDI and BMT configurations, while LS-160BSP has its own disc arrangement. Replacement selection compares holder mounting, tool drive and turret centre height.
- LS-160DTR: VDI30 or BMT55-ER25
- LS-200DTR: VDI40 or BMT65-ER32
- LS-250DTR: centre height 125 mm
- LS-160BSP: BMT45-ER25 holder
Selecting a turret for a lathe
We select Lio Shing turrets by drive type, centre height and tool interface. Hydraulic models use cam indexing, SV models use servo indexing, and SP, DBR, DTR and BSP support powered tools. Machine integration also covers mounting, working envelope and control signals.
Supply scope and tool disc
A complete turret, a tool disc, holders and drive assemblies are separate purchasing scopes. VDI and BMT options must match the actual configuration; equal centre height does not establish interface compatibility.
A powered turret also requires agreement on its tool motor and transmission connection.
Spare assemblies and replacement
Hydraulic motors, servo motors, locating couplings and tooling can be sourced against an agreed Lio Shing specification. Retaining a machine layout requires comparison of mounting dimensions, tool positions and the disc interface.
Complete turret replacement also involves the hydraulic circuit and machine control.
Lio Shing and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Lio Shing and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
Documents and sources
- Turret catalog: hydraulic, servo and powered ranges
- Company: turret manufacturing and inspection
- Chinese company name and product range
- Hydraulic turret LS-100: specifications and dimensions
- Hydraulic turrets LS-120-160: specifications and dimensions
- Hydraulic turrets LS-160A-200: specifications and dimensions
- Hydraulic turrets LS-240: specifications and dimensions
- Hydraulic turret LS-320: specifications and dimensions
- Hydraulic turrets LS-400A-400: specifications and dimensions
- Servo turret LS-100SV: specifications and dimensions
- Servo turrets LS-120SV: specifications and dimensions
- Servo turret LS-240SV: specifications and dimensions
- Servo turrets LS-250SV: specifications and dimensions
- Powered turret LS-120SP: specifications and dimensions
- Powered turret LS-160SP: specifications and dimensions
- Powered turrets LS-200SP-250SP: specifications and dimensions
- Powered turret LS-100DBR: specifications and dimensions
- Powered turrets LS-160DBR-200DBR: specifications and dimensions
- Powered turret LS-250DBR: specifications and dimensions
- Powered turrets LS-160DTR-200DTR: specifications and dimensions
- Powered turret LS-250DTR: specifications and dimensions
- Powered turret LS-160BSP: specifications and dimensions
