Wenglor machine vision cameras and inspection systems
Select cameras, profile sensors, lighting and controllers for quality inspection, geometry measurement and code reading. We help specify the hardware and software configuration.
MLSL, MLWL and MLZL profile sensors
Profile sensors capture surface geometry. The portfolio includes MLSL, MLWL and MLZL. Match the measuring field, laser and interface before replacement. Protective housings, cooling units and mounts depend on the installation.
- MLSL, MLWL and MLZL families
- Profile and position inspection
- Protective housings and cooling units
- Geometry checks after replacement
BBVK and BBZK machine vision cameras
A machine vision camera supplies images to a processing system. BBVK and BBZK families include color and monochrome versions. Dynamic scenes require attention to shutter and exposure. Replacement checks include lens, image transfer and mounting.
- BBVK and BBZK camera families
- Color and monochrome versions
- Image acquisition for processing
- Lens and connection selection
B60 and weQube B50 smart cameras
Smart cameras combine image acquisition and processing. The range includes B60 and weQube B50. Available functions depend on the device and software version. Before replacement, preserve the inspection project, recipes and communication settings.
- B60 and weQube B50 platforms
- Industrial image inspection
- Application-specific configuration
- Project and license compatibility checks
Machine vision illumination
Illumination creates the contrast needed by an inspection. The range includes ring, bar, dome and flat lights. LEDs, optics and diffusers work together. A replacement must preserve the lighting geometry and be checked against representative samples.
- Ring and bar illumination
- Dome and flat lighting options
- LEDs, optics and diffusers
- Selection against the target surface
1D and 2D code scanners
Code scanners read identifiers and pass results to the control system. The portfolio includes C5PC, C5KC and C50C. Selection depends on the marking, surface and code position. After replacement, check decoding, output data and the response to a failed read.
- 1D and 2D code reading
- C5PC, C5KC and C50C series
- Different illumination arrangements
- Tests with real production markings
MVC controllers and vision software
Controllers process camera and profile sensor data. The portfolio includes MVC and uniVision, VisionApp and AI Lab software. Match projects and licenses before replacement. Preserve device settings and verify result transfer to the machine controller.
- MVC machine vision controllers
- wenglor uniVision software
- VisionApp and AI Lab tools
- Result transfer to the control system
Specify the inspection task first
We select Wenglor machine vision systems by the feature to be inspected, sample parts and interface. Start with the difference between an accepted part and a rejected part: geometry, presence, position, surface condition or a code.
Image tasks require a camera and lighting arrangement; profile measurement requires a suitable scanner. Define the actual position of the target and the result required by the control system.
This makes it possible to compare complete configurations rather than isolated cameras with similar descriptions.
Separate essential conditions from optional preferences. Describe mounting space, the environment, target movement and available interfaces. For an existing machine, retain the inspection project and complete device codes. For a new station, agree the sample set and acceptance criteria.
The proposal should connect every component to the task and identify which items the customer already has and which are included in the delivery.
Choose cameras, lenses and lighting together
BBVK and BBZK cameras supply images to a processing system. B60 and weQube B50 smart cameras combine image acquisition and processing. The choice depends on the project architecture and where evaluation will run.
Specify the field of view, target position, movement and required image characteristics. Resolution alone does not establish whether a camera suits the application. Review the lens and mounting arrangement together with the camera rather than treating them as unrelated accessories.
Lighting creates contrast for the feature being inspected. Ring, bar, dome and flat illumination arrangements suit different surfaces and tasks. Check the proposed arrangement against real samples before freezing the configuration.
List the camera, lens, light and connections separately in the supply package. This keeps offers comparable and helps avoid receiving a functioning camera that cannot produce a useful inspection image under the lighting available at the installation.
Define profile geometry before selecting a scanner
For MLSL, MLWL and MLZL, provide a drawing of the object and the intended measuring area. State the relevant part of the profile, surface position and target motion. Check the properties of each exact version against its documentation.
Do not combine the maximum values of different scanners into one assumed family specification. Mechanical placement and synchronization are parts of the measurement solution, not details that can always be deferred until installation.
When buying a replacement, preserve the order code, bracket position and current parameter set. For a new system, agree sample parts and the method used to verify the measured feature. Add compatible protective housings, cooling units and mounts where required by the installation.
After fitting the device, check geometry in the actual operating position. A parameter file helps restore settings but does not replace measurement validation after changing the mechanical arrangement.
Make code reading part of the production sequence
For C5PC, C5KC and C50C, describe the code type, marking method, surface and code position. Include readable samples as well as examples that are difficult to decode. Specify when reading must start and where the result is sent.
This information supports a configuration for the actual identification task rather than a general request to read every possible code. For moving parts, describe the real image acquisition conditions and the relationship between the trigger and target position.
Acceptance should cover more than a successful decode. Check the transmitted content and the response when the marking is missing or damaged. If the line handles different products, specify how the appropriate recipe or operating mode is selected. Include the required connections and mounting items.
Link the final configuration to the production samples and machine communication arrangement so that purchasing and engineering share a concrete definition of the proposed system.
Match controller, software and licenses
MVC controllers process data from cameras and profile sensors. The software portfolio includes uniVision, VisionApp and AI Lab tools. Specify the actual hardware platform, required functions, versions and licenses. If an existing project must be retained, check its compatibility separately.
A software family name does not mean that all configurations provide identical features or accept the same project file without review. Keep that distinction visible in the specification before comparing controller offers.
For a new system, agree the number and purpose of connected devices, the input data and the result format. For a replacement, record available backups and communication settings. The quotation should distinguish hardware, software licenses and configuration work.
Before ordering, establish which files and access rights the system owner can provide. This creates a practical integration plan and identifies the parts that must be validated on the customer’s equipment.
Confirm the complete supply package
A supply request should include the task, device quantities and available samples. For a replacement, add labels, installation photographs and the available project. Cameras need lens and lighting details; profile measurement needs a drawing of the working area; code readers need actual markings.
These inputs support a useful bill of materials with separate accessories and software items. They also let the engineer identify existing equipment that can remain in the proposed arrangement.
Before ordering, verify codes, compatibility and required documentation. On receipt, check labels and package contents. After installation, perform the agreed sample-based inspection and verify image or profile acquisition, evaluation, mode selection and result transfer.
Standard Wenglor detection sensors are handled as a separate product direction. Include them in a machine vision package only when they have a defined role in the trigger or inspection arrangement.
Wenglor Machine Vision and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Wenglor Machine Vision and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Balluff
- Equipment and parts for Baumer
- Equipment and parts for Cognex
- Equipment and parts for SICK
