Elatech polyurethane timing belts: ELA-flex SD, iSync, SYNCRO-MAX and ELAClean

Elatech polyurethane belts: Open End M and V, truly endless ELA-flex SD up to 24,000 mm, SYNCRO-MAX up to 500 mm wide, iSync, ELAClean and iFood food belts, coatings, cleats and EFT. Quotation per project.

Open End belts: metered M and welded V

ELATECH M metered belts serve linear motion and lifting; V belts are closed by hot welding in any length. The body is 92 Sh.A thermoplastic polyurethane with steel cords; PAZ fabric on teeth, PAR on the back or both on request. Profiles: HTD, RTD, STD, imperial MXL–XH and SAT10 without flanges.

  • 92 Sh.A polyurethane
  • HTD, RTD, STD profiles
  • SAT10 without flanges
  • Steel tension cords

Truly endless ELA-flex SD belts up to 24,000 mm

ELA-flex SD belts have endless steel cords with no splice or welding, so there are no weak cross sections. Lengths run tooth by tooth from 800 to 24,000 mm. The NEXT version with S + Z bifilar cords reduces friction and backlash, and a dual-toothed DUAL belt is available.

  • Length 800–24,000 mm
  • NEXT: S + Z cords
  • DUAL double-sided belt
  • HTD, RTD, STD profiles

SYNCRO-MAX extra-wide belts up to 500 mm

SYNCRO-MAX Extra-Wide belts bring synchronous drive to conveyor and plastic modular belt applications. The 92 Sh A polyurethane is reinforced with aramid cords; the T10 pitch is 10 mm, H pitch 12.7 mm, standard roll 50 m. Silicone, TPU, PVC and rubber coatings and water-jet perforation are offered.

  • Width up to 500 mm
  • T10 pitch 10 mm
  • Standard roll 50 m
  • Aramid tension cords

iSync timing belts for power transmission

iSync belts for power transmission have a polyurethane resin body and steel or aramid cords. They transmit up to 30% more than conventional T and AT belts. The standard operating range is -10 °C to +80 °C, up to +125 °C with the PU 53 compound. Standard profiles: T2.5, T5, T10, AT5, AT10, XL and L.

  • Up to 30% more than T/AT
  • -10 °C to +80 °C range
  • PU 53 up to +125 °C
  • T, AT, XL, L profiles

ELAClean ECW monolithic food belts

ELAClean ECW belts are monolithic, made of homogeneous thermoplastic polyurethane for food contact, with no cords. Profiles are ECW-P1N with 26 mm pitch, ECW-P2N with 50 mm, the self-centering ECW-C4N with 39.7 mm and the flat ECW-F3N. Surfaces are glossy, matte or No-Cling.

  • ECW-P1N: 26 mm pitch
  • ECW-P2N: 50 mm pitch
  • ECW-C4N: 39.7 mm pitch
  • ECW-F3N: 100 m roll

iFood and Total Protection belts for wet areas

iFood belts come in FT5, FT10 and FAT10 profiles, 100 mm wide, with fully encapsulated S and Z aramid cords and a -20 °C to +80 °C working range. The Total Protection line in food grade 92 Sh.A polyurethane protects the cords from moisture, in F2.5, HTD8, T10, AT10 and T20 profiles.

  • iFood width 100 mm
  • -20 °C to +80 °C range
  • FT5, FT10, FAT10
  • TP: HTD8, AT10, T20

Back coatings: fabric, foam, PVC, rubber

Elatech applies coatings from six groups to the belt back: fabric, cell foam, polyurethane, PVC, rubber and special materials such as silicone, chrome leather, TEZ and felt. Polyamide fabric cuts friction: polyurethane on steel 0.7, PAZ-PAR on steel 0.35.

  • 6 coating groups
  • PU on steel: 0.7
  • PAZ-PAR on steel: 0.35
  • Silicone, leather, felt

Cleats, EFT false teeth and EMF fastening

Polyurethane cleats, including versions with metal inserts, form a single body with the belt. In the EFT system a zinc coated or stainless steel false tooth replaces the belt tooth, in AT10, ATK10, AT20, XH and H profiles. EMF fastening fits an endless belt without dismantling machine parts.

  • EFT: AT10, AT20, H
  • TAS154 false tooth
  • EMF: all but EAGLE
  • PU cleats, metal inserts

How to choose an Elatech belt

Selection starts with the task. ELATECH M metered belts suit linear motion and lifting, welded V belts suit synchronized conveying of any length, and truly endless ELA-flex SD belts of 800–24,000 mm suit high speed power transmission and heavy conveying.

SYNCRO-MAX belts up to 500 mm wide replace modular belts on wide conveyors, iSync belts serve compact drives, and ELAClean and iFood belts serve food lines.

Next come profile and pitch, width, length, cord and back coating. For drive calculation the manufacturer offers its ElaDrive software.

Elatech cords and materials

For Open End, ELA-flex SD and iSync belts, HFE cords allow pulleys and idlers up to 30% smaller than standard, HPL cords with a larger section give lower elongation and better positioning accuracy, and HPFE cords combine stiffness with flexibility.

Stainless steel cords serve aggressive environments and food lines, aramid cords give a non-magnetic, light belt.

iSync runs from -10 °C to +80 °C as standard and up to +125 °C with the PU 53 compound. Open End and ELA-flex SD belts are available silicone free, FDA compliant or antistatic on request.

Coatings, cleats, EFT and EMF for conveying

Coatings are applied to the belt back in six groups: fabric, cell foam, polyurethane, PVC, rubber and special materials. PAZ-PAR fabric lowers friction on steel from 0.7 to 0.35. Cleats are made of polyurethane, including versions with metal inserts.

The EFT system with steel false teeth carries higher loads than traditional cleats and lets a single element be replaced instead of the whole belt. EMF fastening is available in all profiles except EAGLE and fits without dismantling the machine.

ELAClean food belts

ELAClean ECW monolithic belts come with 26, 50 and 39.7 mm pitch or flat, with no cords, and serve as a drop-in replacement for most thermoplastic belts. iFood belts in FT5, FT10 and FAT10 profiles have encapsulated cords and work from -20 °C to +80 °C.

ELAClean elastic belts 1–4 mm thick work from -30 °C to 60 °C, and round belts of 4–12 mm diameter come on 50 or 100 m spools and are welded on site.

The manufacturer

Elatech S.r.l. of Val Brembilla, Italy, makes polyurethane belts and is part of the Scaglia group. Its quality system meets ISO 9001, and the belts are sold through more than 150 distributors.

Sizes and lead time are stated in the quotation for each project.

Elatech and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Elatech and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.