Wave Cyber / WaveCyber Composite Pressure Vessels, Membrane Housings and RO Elements
Supply of Wave Cyber / WaveCyber composite FRP pressure tanks, membrane pressure vessels 300–1500 psi, Ospura RO and NF membrane elements, and brine cabinets. Technical selection.
Wave Cyber Composite Pressure Tanks and FRP Filter Vessels
Wave Cyber composite pressure tanks feature continuous filament winding over seamless PE liners for media filtration and softening systems. Available from 6 to 63 inches with 2.5-inch and 4-inch threaded ports or top flanged openings rated at 150 psi with ASME, NSF, and PED.
- Vessel sizes 0817, 1054, 1252, 1354, 1465, 1665, 2162, 3672, 4872, and 6386
- Seamless food-grade PE liner reinforced with continuous fiberglass and epoxy resin
- Operating pressure up to 10.5 bar (150 psi), fatigue cycle tested to 250,000 pulses
- Top openings 2.5" and 4" NPSM, industrial flanges, bottom bases, and hub adaptors
Wave Cyber RO and NF Membrane Pressure Vessels and Housings
Wave Cyber membrane pressure vessels are manufactured from filament-wound FRP composite for RO and NF membrane filtration. Available in 2.5, 4, and 8-inch diameters with end-port or side-port configurations rated for pressures from 300 to 1500 psi under ASME and NSF.
- Sizes 2.5", 4040, 4080, 8040, 8080 and multi-element vessels from 1 to 7 elements
- Precision filament-wound FRP, resistant to seawater, brine, and chemical CIP
- Pressure tiers 150, 300, 450, 600, 1000, 1200, and 1500 psi (ASME/NSF)
- Bearing plates, EPDM seal rings, stainless steel retaining rings, and port adaptors
Wave Cyber Ospura Reverse Osmosis and Nanofiltration Membrane Elements
Ospura spiral-wound RO and NF membrane elements from Wave Cyber deliver high flux and salt rejection for industrial water reuse, seawater desalination, and lithium extraction. The polyamide composite chemistry provides over 99.5% rejection with robust fouling resistance.
- Ospura RO and NF membrane elements in 4040 and 8040 sizes plus flat sheet rolls
- Polyamide thin-film composite (TFC) chemistry engineered for low fouling
- Nominal salt rejection 99.5% to 99.7% with high permeate flux efficiency
- Replacement spiral elements, anti-telescoping devices (ATD), and brine seals
Wave Cyber Brine Tanks, Softening Cabinets, and Distributor Systems
Wave Cyber brine tanks, softening cabinets, and distribution systems ensure reliable regeneration in water softening plants. Molded from chemical-resistant HDPE in capacities from 70 to 1000 liters, each tank includes brine valves, grid plates, and air checks.
- Tanks 70, 100, 145, 200, 350, 500, and 1000 L, softening cabinets 8" and 10"
- Chemical-grade UV-stabilized high-density polyethylene (HDPE)
- Full chemical resistance to saturated brine, acids, and regeneration agents
- Brine wells, safety float shutoff valves, false bottom grid plates, and tubing
Engineering Selection of Wave Cyber Composite Pressure Vessels for Water Treatment
Wave Cyber composite pressure vessels ranging from 6 to 63 inches in diameter are designed for media filtration, iron removal, water softening, and carbon adsorption. Sizing requires calculating required service flow rate, media bed volume, and necessary freeboard expansion during backwash cycles.
The seamless food-grade polyethylene inner liner ensures zero chemical leaching and complete corrosion immunity. Computer-controlled continuous filament winding with high-grade epoxy resin delivers a safety burst pressure ratio exceeding 4:1 over standard 150 psi working pressure.
Tanks feature 2.5-inch or 4-inch NPSM top openings for commercial installations and 6-inch flanged top and bottom connections for heavy-duty industrial systems, fully compatible with automatic control valves from Clack, Fleck, and Runxin.
Membrane Pressure Vessel Configurations for Industrial Reverse Osmosis and Desalination
Wave Cyber fiberglass membrane housings accommodate from 1 to 7 standard 4040 and 8040 spiral-wound membrane elements. End-port configurations are ideal for standalone skids, while multi-port side-entry vessels streamline piping manifold design in multi-element industrial arrays.
Side-port connections enable direct header coupling, reducing pipe fittings, pressure drop, and skid footprint in seawater desalination and ultrapure water plants. All vessels follow ASME Section X and NSF standards with pressure tiers up to 1500 psi.
Wave Cyber / WaveCyber and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Wave Cyber / WaveCyber and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
Documents and sources
- Official Wave Cyber Portal — Composite Pressure Tanks and Membrane Housings
- About Shanghai Wave Cyber New Material Co., Ltd. and Manufacturing Capabilities
- Official Corporate Overview of Shanghai Wave Cyber New Material in China
- Wave Cyber Composite Pressure Tanks — Series and Technical Specifications
- Wave Cyber Membrane Pressure Vessels for Reverse Osmosis and Nanofiltration
- Wave Cyber Brine Tanks, Brine Cabinets, and Water Softening Solutions
- Wave Cyber Softening Cabinets for Commercial and Residential Water Treatment
- Ospura Reverse Osmosis and Nanofiltration Membrane Product Series
- Official Issuer Profile of Wave Cyber (Stock 688057) on Shanghai Stock Exchange
