AIKOH Engineering Material Testing Machines & Force Gauges

Technical selection of AIKOH Engineering FTN benchtop load testers, RZE digital force gauges, and torque angle analyzers for precision quality testing.

Benchtop Force Testers and Tensile Machines FTN Series

AIKOH FTN1-13A and MODEL-1310K benchtop test stands perform precision tensile and compression testing up to 2 kN. A rigid dual-column load frame featuring 390 mm stroke and 0.01 mm resolution delivers repeatable material evaluation. Integrated controllers record load-displacement curves.

Capacity up to 2 kN
Resolution 0.01 mm
Stroke 390 mm
Ball screw drive

Digital Force Gauges and Push-Pull Meters RZE Series

AIKOH RZE portable digital force gauges cover capacities from 10 N to 1000 N with a display resolution down to 0.001 N and accuracy of 0.2% F.S. The instruments feature an LCD screen, USB data export, and an analog voltage output. Internal cells support up to 30 continuous operating hours.

Capacity 10–1000 N
Accuracy 0.2% F.S.
USB & analog ±2V
30-hour battery

Torque Angle Testers and Torsion Meters MODEL-5125K

The AIKOH MODEL-5125K desktop torque tester measures operating torque and angle for rotary switches, potentiometers, and threaded assemblies. Featuring a torque range up to 5 N·m and 0.01 N·m accuracy, it uses a brushless DC motor. Rotation speed is adjustable from 0.2 to 6 RPM.

Torque up to 5 N·m
Accuracy 0.01 N·m
Speed 0.2–6 RPM
Brushless DC motor

Switch Feeling and Tactile Testers GT-FL500

The AIKOH GT-FL500 automated tester specializes in tactile response and force-displacement evaluation for keyboards and dome switches. Three-axis XYZ servo actuation and monitoring for up to 16 contacts record operating peaks. Dynamic force-travel curves are displayed in real time.

Load up to 50 N
XYZ 3-axis servo
16-contact monitoring
Tactile click curve

Precision Spring Testers SW and SWT Series

AIKOH SW and SWT series spring testers evaluate force-deflection parameters for compression and extension springs in automated cycles. A touchscreen controller stores up to 100 recipes, calculating spring rate and free length. An integrated printer produces test reports.

Compression & tension
100 memory recipes
Built-in thermal print
Spring rate readout

Adhesion and Peeling Testers FTN4-15A

Engineered on the FTN platform, the AIKOH FTN4-15A peeling tester determines adhesive bond strength for pressure-sensitive tapes and films. Dedicated fixtures enable 90° and 180° peel tests under JIS Z0237 standards. Testing speed is programmable up to 1000 mm/min.

Speed up to 1000 mm/min
90°/180° peel fixtures
JIS Z0237 standard
Force up to 50 N

Cable Flexing and Cyclic Endurance Testers CBL/5S

The AIKOH CBL/5S multi-station endurance tester conducts cyclic bending evaluations on power cords, wiring harnesses, and flexible conductors. Compliant with JIS C 8306 and UL 817 standards, its flexing angle is adjustable from ±40° to ±90° with auto-stop upon wire rupture.

5 testing stations
Flex angle ±40° to ±90°
JIS & UL compliance
Breakage auto-stop

Tension and Compression Load Cells S8000 and US Series

AIKOH S8000 and US universal load cells measure tension and compression across rated capacities from 5 N to 1000 N. High-precision strain-gauge bridges ensure low non-linearity within ±0.1% R.O. Connected to MODEL-0218B amplifiers, they deliver fast load monitoring in presses.

Capacity 5–1000 N
Non-linearity ±0.1%
Tension & compression
MODEL-0218B indicator

Advanced AIKOH Precision Force Testers and Measurement Systems

Aikoh Engineering Co., Ltd. engineers high-precision material testing equipment and digital force measurement systems.

The FTN1-13A and MODEL-1310K series feature rigid dual-column load frames, zero-backlash ball screws, and integrated MODEL-1018 digital amplifiers to capture force-displacement relationships with 0.01 mm resolution.

For portable quality verification, RZE series force gauges provide resolution down to 0.001 N with USB output, while GT-FL500 automated systems execute comprehensive three-axis tactile click evaluation on switches and dome membranes.

Industrial Quality Assurance and Manufacturing Applications

AIKOH testing platforms serve automotive electronics, wire harness manufacturing, polymer packaging, and medical device fabrication. MODEL-5125K torque testers verify switch rotational resistance, while CBL/5S endurance systems conduct cyclic bending testing under JIS C 8306 and UL 817 standards.

SpareX provides international equipment procurement, technical selection, commissioning coordination, and replacement load cells for production testing facilities and R&D laboratories worldwide.

AIKOH Engineering and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of AIKOH Engineering and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.