Wiha / Wiha Tools Professional Industrial Hand and Assembly Tools

Technical directory and specifications of precision hand tools, torque screwdrivers, VDE insulated equipment, and e-screwdrivers by German manufacturer Wiha Werkzeuge GmbH.

speedE Electric Assembly Screwdrivers

The speedE II electric screwdriver features an electric drive to protect joints and tendons with an integrated material protection function. The motor stops automatically at the torque limit. An integrated ring LED light provides shadowless work area view.

speedE II electric drive
Material protection stop
Shadowless ring LED light
Interchangeable slimBits

TorqueVario-S Adjustable Torque Screwdrivers

TorqueVario-S series torque screwdrivers provide adjustable torque limits between 0.8 and 5.0 Nm for electrical installation tasks. The internal mechanism generates an audible click when reaching the limit. Scale settings are locked using the Torque-Setter key.

Adjustable 0.8 to 5.0 Nm range
Audible mechanical click signal
Torque-Setter adjustment key
Insulated up to 1000 V

SoftFinish slimFix Insulated Screwdrivers

SoftFinish slimFix screwdrivers feature an ergonomic multi-component handle for high torque transfer without hand fatigue. The slimTechnology integrated insulation enables access to deep-set terminal screws. Protective insulation is rated for live work up to 1000 V.

Ergonomic SoftFinish handle
Slender slimTechnology blade
Insulation rated up to 1000 V
Profiles SL, PH, PZ & PlusMinus

BiCut and TriCut Professional Installation Pliers

BiCut diagonal cutters feature a Power button that doubles cutting performance for piano wire and tough cables with minimal effort. TriCut multi-functional pliers combine cutting, stripping, and outer skinning. The DynamicJoint pivot reduces friction and wear.

Switchable BiCut Power boost
3-in-1 TriCut cable pliers
DynamicJoint low-wear pivot
Induction-hardened cutting edges

slimBit Blades and CentroFix Quick-Release Holders

Insulated slimBit blades are engineered for slimVario handles and speedE screwdrivers during control cabinet assembly. The CentroFix quick-release bit holder provides play-free locking. Heavy-duty MaxxTor torsion bits absorb extreme torque peaks during driver use.

Insulated slimBit blades
CentroFix mechanical lock
MaxxTor torsion impact zone
Profiles TORX, TORX PLUS, PZ

XXL Electric Professional Tool Cases and Trolleys

The XXL Electric mobile trolley case houses a complete electrician tool assortment inside an impact-resistant polypropylene shell. Gas-filled dampers hold the lid securely open to protect fingers. When closed, the rugged structural casing serves as a stable work step.

Impact-proof polypropylene shell
Gas-filled lid safety dampers
Extra-wide stair-climbing wheels
Integrated stable work step

ErgoStar Ball End Hex L-Key Sets

Wiha ErgoStar hex L-key sets feature an innovative bracket enabling easy extraction of individual keys without shifting neighbors. The MagicRing retaining spring ball end holds standard screws securely at tilt angles up to 25 degrees. Chrome plating prevents corrosion.

ErgoStar smart bracket
MagicRing retaining spring
Working angle up to 25 deg
Corrosion-proof chrome

e-Check Voltage and Continuity Testers

The Wiha electrical testing instrument line includes e-Check two-pole voltage testers and VoltDetector contactless indicators. The equipment meets CAT IV 1000 V safety standard for operations in main supply panels. Bright LED ladders and digital screens show parameters.

Safety class CAT IV 1000 V
e-Check two-pole testers
VoltDetector contactless probe
Backlit LCD and LED scale

Engineering Features of Wiha speedE II Electric Screwdrivers

German hand tool manufacturer Wiha Werkzeuge engineered the speedE electric screwdriver family to accelerate repetitive fastening cycles while safeguarding components.

The integrated electric motor turns the drive spindle at up to 280 rotations per minute for rapid initial run-down.

As resistance rises to the dialed torque threshold, the smart material protection mechanism stops motorized turning, allowing the craftsperson to complete final tightening manually with precision.

Torque Regulation Principles of the TorqueVario-S Tool System

Controlled screw tightening in electrical switchgear assembly prevents stripped threads, deformed terminal cages, and loose high-resistance contact points.

TorqueVario-S handles integrate a fine micrometer scale with 0.1 Nm graduation steps and a positive locking adjustment mechanism. Upon reaching the preset torque limit, the internal spring-loaded cam mechanism disengages with a sharp audible click and tactile impulse, preventing overtightening.

SlimTechnology Insulation Design for Electrical Safety

For live electrical equipment maintenance, Wiha incorporates proprietary slimTechnology insulation integrated flush along the blade steel.

The dielectric insulation is molded directly into the drive shaft without outer stepped lips. This slim profile permits unrestricted access into deep-set screw wells of circuit breakers and terminal blocks without stripping protective coatings against adjacent housing walls.

Dual-Power Leverage Mechanism in BiCut High-Leverage Cutters

Wiha BiCut professional diagonal cutters feature a mechanical rocker button that alternates the pivot leverage geometry for cutting extremely tough wire grades.

In standard operation mode, the tool acts as a swift cutter for copper conductors and plastic wiring ducts. Pressing the Power button shifts the mechanical pivot point to double cutting force, cleanly shearing spring steel wires and piano wire without damaging the induction-hardened blades.

MaxxTor Torsion Geometry and CentroFix Quick-Lock Adapters

High-torque impact drivers subject standard screwdriver bits to severe shock stresses, causing premature tip shearing and screw head cam-out.

Wiha MaxxTor bits feature an engineered flexible torsion zone that flexes under impact torque spikes to absorb excess energy. Paired with CentroFix quick-release adapters that lock bits mechanically with a hardened ball detent, the system ensures concentric rotation and prolonged bit lifespan.

SoftFinish Ergonomic Handle Geometry and XXL Tool Transport Systems

Continuous manual fastening during industrial installations places heavy strains on wrist tendons and arm musculature when improper grips are used.

Wiha SoftFinish handles are contoured to match palm anatomy and are approved by German AGR orthopedic specialists for joint-friendly power transmission. For mobile field engineers, Wiha builds rugged XXL trolley tool boxes with gas-strut lid dampers and heavy-duty wheels to navigate stairways.

Wiha / Wiha Tools and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Wiha / Wiha Tools and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.