Sinoco / Shenzhen Sinoco Lighting Technologies Co., Ltd. Industrial & Roadway LED Luminaires

Sinoco high-efficacy LED lighting solutions for municipal expressways, industrial warehouses, and fuel station canopies. Achieving up to 200 lm/W with Nichia chips and Meanwell power units.

Canopy Luminaires Sinoco ST-GS and ST-GS-C for Fuel Stations

ST-GS-C canopy luminaires serve fuel stations and logistics canopies. Operating from 40W to 150W, fixtures utilize LUMILEDS emitters and Meanwell power units yielding 130 lm/W. Sealed aluminum housing protects electronics against volatile hydrocarbon vapors and moisture.

Wide operational input voltage from 100 to 277VAC across 50/60Hz industrial mains
High-efficacy LUMILEDS optoelectronic modules delivering 130 lm/W system output
Industrial-grade Meanwell driver assembly with integrated electrical surge protection
Robust sealed aluminum enclosure rated IP66 with tempered protective front glass

Roadway Luminaires Sinoco ST-41 and ST-41-Mini Series

Roadway luminaires ST-41 combine aerodynamic housing with outstanding efficacy up to 200 lm/W using Nichia LEDs. Tool-free access to driver compartment streamlines field maintenance procedures. Mechanical protection IK10 and IP66 sealing withstand heavy vibrations on highway flyovers and bridges.

Premium Nichia optoelectronic array achieving system efficacy rating up to 200 lm/W
Quick-release latch mechanism enabling tool-free compartment access for servicing
High-strength molded aluminum housing featuring IK10 impact and IP66 ingress ratings
Universal pole mounting adapter accommodating diameter spans from 48 to 60 millimeters

Smart Municipal Luminaires Sinoco ST-52, ST-52-I, and ST-52-IL

ST-52 luminaires are tailored for multi-lane expressways and smart city networks. Fixtures support standard NEMA or Zhaga connectors for wireless photodiode modules. Optical assemblies using UV-stabilized polymer lenses and ultra-white toughened glass distribute uniform luminance over road surfaces.

High-performance optical engine achieving luminous output efficacy up to 200 lm/W
Pre-wired standard NEMA 7-pin and Zhaga Book 18 receptacles for wireless controllers
UV-stabilized engineered polymer lenses paired with ultra-white toughened safety glass
Full compatibility with 1–10V, PWM, and bidirectional DALI dimming protocols

Industrial High Bay Luminaires Sinoco ST-21 Series

ST-21 High Bay luminaires illuminate industrial workshops and distribution centers with ceiling heights from 6 to 18 meters. The heavy aluminum heat sink facilitates thermal dissipation from LED arrays, securing uninterrupted operation under multi-shift industrial duty cycles.

Power configurations spanning 100W to 240W for mounting heights reaching 18 meters
Heavy-duty radial cooling fins promoting air convection and lowering junction heat
Interchangeable optical reflectors delivering beam spreads of 60, 90, and 120 degrees
IP65 ingress sealing with stainless steel eye bolt adapter for secure suspension

Industrial Flood & Tunnel Luminaires Sinoco ST-FL and ST-BLS

Luminaires ST-FL and ST-BLS are built for outdoor industrial yards, cargo ports, and tunnel portals. The adjustable mounting bracket with calibrated angle markings allows precise beam orientation. Integrated transient suppression protects electronics against line voltage surges up to 10/20 kV.

Reinforced mounting yoke with angular angle marks facilitating beam adjustment
Internal surge protection module shielding electronics against 10/20 kV spikes
Asymmetric optical lens arrays tailored for tunnel portals and security perimeters
Heavy-duty IP66 housing engineered to resist salt mist and mechanical vibrations

Linear Industrial Luminaires Sinoco ST-LL01 and STRL Series

Linear luminaires ST-LL01 and STRL series serve manufacturing assembly lines, workshops, and underground facilities. Through-wiring architecture allows seamless trunking integration without external conduits. Opal polycarbonate diffusers eliminate harsh glare while delivering uniform illuminance.

Integrated through-wiring harness for rapid connection into continuous trunking
Opal impact-resistant polycarbonate diffuser offering uniform luminance output
Industrial drivers maintaining flicker-free operation with ripple below one percent
Extruded aluminum profile with spring-loaded steel clips for ceiling or cable hang

Aerodynamic Roadway Optics and High Efficacy of ST-41 Series Luminaires

Sinoco ST-41 roadway luminaires are tailored for multi-lane expressways with stringent wind load requirements. The streamlined profile of the molded aluminum enclosure minimizes wind drag while decreasing mechanical stresses on light poles.

Incorporating Nichia optoelectronic emitters alongside precision lenses secures luminous efficacy up to 200 lm/W with optimal road illuminance uniformity. A tool-free latching compartment accelerates electrical maintenance without requiring specialized gear aloft.

Smart City Connectivity and Standardized NEMA/Zhaga Receptacles on ST-52

The Sinoco ST-52 highway luminaire family is built for smart municipal management platforms. Each fixture supports standardized NEMA 7-pin or Zhaga Book 18 receptacles for direct connection of wireless LoRaWAN, Zigbee, and NB-IoT nodes.

Integrated driver electronics enable continuous 1–10V and DALI dimming. UV-stabilized engineered polymer lenses withstand degradation from sun exposure, retaining photometric beam precision across extended operating lifespans.

Explosion-Proof Protection and Ingress Sealing of ST-GS Canopy Luminaires

Fuel dispensing areas require stringent ingress sealing and explosion safety compliance. Sinoco ST-GS and ST-GS-C canopy luminaires ranging from 40W to 150W utilize dual silicone gaskets to isolate electrical components from volatile hydrocarbon vapors.

Ultra-white tempered glass shields LUMILEDS emitter arrays against thermal shocks and washdown chemicals. Symmetrical beam distributions ensure glare-free, uniform illuminance across fueling bays.

Thermal Management Architecture of ST-21 Industrial High Bay Fixtures

High-ceiling workshops and logistics centers depend on controlled junction temperatures for semiconductor longevity. Sinoco ST-21 High Bay luminaires incorporate a heavy-duty radial aluminum heat sink with open convection slots.

Air draft through cooling channels dissipates heat from LED arrays under demanding thermal conditions beneath high industrial ceilings. Interchangeable reflectors with 60, 90, and 120-degree spreads direct illuminance onto aisles and work cells.

Surge Immunity and Harsh Marine Resistance of ST-FL Heavy-Duty Floodlights

Sinoco ST-FL and ST-BLS industrial floodlights withstand harsh environmental exposure in marine ports, freight terminals, and tunnel entries. Enclosures feature powder coatings formulated against salt-spray corrosion.

Internal transient voltage suppression absorbs surges up to 20 kV from lightning strikes and switching transients. A reinforced mounting yoke with angular angle marks preserves target alignment through severe storm winds.

Through-Wiring Architecture and Modular Trunking of ST-LL01 Linear Systems

Sinoco ST-LL01 and STRL linear luminaires create continuous illumination runs in industrial assembly plants and warehousing aisles. Pre-wired internal three-phase trunking links consecutive units with plug-and-play connectors, avoiding external conduit runs.

Impact-resistant opal polycarbonate diffusers distribute smooth luminance without high-contrast glare. Low-ripple drivers keep flicker below one percent to prevent visual fatigue.

Sinoco / Shenzhen Sinoco Lighting Technologies Co., Ltd. and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Sinoco / Shenzhen Sinoco Lighting Technologies Co., Ltd. and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.