UTRANS / UTRANS Kran- und Transportanlagen — Industrial Overhead Traveling & Special Cranes

Heavy-duty industrial bridge, gantry, slewing jib, and metallurgical crane solutions by UTRANS / UTRANS Kran- und Transportanlagen (Germany). Technical DEMAG partner engineering, KBK lightweight suspension systems, DMR wire rope hoists, and DC-Pro chain hoists from SpareX.

UTRANS Single-Girder Overhead Traveling Cranes

UTRANS single-girder bridge cranes deliver efficient material transport in workshops with low ceiling clearances. The bridge girder is fabricated from rolled steel sections or welded box designs equipped with DEMAG hoists. Systems provide spans up to 30 meters and load capacities up to 16 tons.

Load handling capacities from 1 to 16 tons with bridge spans up to 30 meters
Main girders constructed from rolled I-beams or stiffened welded boxes
Integration of DEMAG wire rope and chain hoists with dual speed control
Replaceable parts: geared travel motors, wheel blocks, and end buffers

UTRANS Double-Girder Overhead Traveling Cranes

UTRANS double-girder traveling cranes are engineered for severe operating cycles and large bulky materials. Two rigid box girders support a heavy-duty crane crab with high-capacity DEMAG wire rope winches. Cranes deliver lifting capabilities up to 100 tons with bridge track spans up to 35 meters.

Lifting capacities from 5 to 100 tons with lift heights up to 40 meters
Full-length maintenance walkways along bridge girders for safe inspection
Double-rail hoists and open winches with high drum wire capacity
Components: rail clamps, electro-hydraulic brake drums, and festoon tracks

DEMAG KBK Modular Lightweight Crane Systems

DEMAG KBK modular lightweight crane systems provide ergonomic load handling for assembly lines and workshops. The system is assembled from standardized cold-rolled steel or extruded aluminum profiles with flexible tracks. Units utilize DEMAG chain hoists rated up to 3200 kg.

Modular profile track sections available in cold-rolled steel or anodized aluminum
Workstation load handling capacities ranging from 80 kg up to 3200 kg
Precision DEMAG DC-Pro electric chain hoists and mechanical load balancers
Spares: articulated ceiling hangers, festoon cable trolleys, and end stops

UTRANS Slewing Jib Cranes

UTRANS slewing jib cranes deliver agile component handling at individual machining cells. Jib models are available in pillar-mounted or wall-mounted designs with slewing ranges up to 360°. The jib arm reaches outreach lengths up to 10 meters with rated load capacities up to 10000 kg.

Available as free-standing pillar-mounted jibs or wall-mounted cranes
Slewing range up to 360 degrees with manual or motorized geared rotation
Outreach radius up to 10 meters with load capacities up to 10000 kg
Replacement parts: slewing bearings, reduction gearboxes, and slip rings

UTRANS Semi-Gantry and Portal Cranes

UTRANS semi-gantry and portal cranes optimize material flow in outdoor yards and workshops without full elevated runways. A semi-gantry crane runs on one wall-mounted elevated track and one floor rail. Units feature automatic rail storm clamps and optical anti-collision sensors for safety.

Load capacities from 3.2 to 50 tons for indoor plants and outdoor logistics
Hybrid track layout combining raised wall runway with ground-level rail
Integrated wind anchoring clamps, acoustic sirens, and warning beacons
Components: travel wheel bogies, motorized cable drums, and track buffers

UTRANS Metallurgical and Special-Purpose Heavy Cranes

UTRANS heavy-duty special cranes are built for harsh operating environments in steel mills and foundries. The range encompasses coil handling cranes, grab cranes for slag, and ladle transporters. Reinforced drive units and heat-resistant insulation endure continuous severe thermal conditions.

Specialized motorized coil tong lifters and heavy lifting electromagnet beams
Motorized clamshell grabs for steel slag, scrap recycling, and solid waste
Engineered for severe duty cycles complying with FEM/ISO A7-A8 crane classes
Spares: high-temperature wire ropes, electro-hydraulic thrusters, and forged hooks

DEMAG Wire Rope and Chain Hoists for UTRANS Cranes

DEMAG DMR wire rope hoists and DC-Pro chain hoists serve as primary lifting units in UTRANS cranes. Modular DMR rope hoists offer flexible reeving and high drum rope capacity. DC-Pro electric chain hoists feature built-in slipping clutches, dual speed lifting, and electronic diagnostics.

DEMAG DMR modular wire rope hoists with lifting capacities up to 50 tons
DEMAG DC-Pro electric chain hoists rated for 1900+ full load hours (FEM 2m+)
Integrated mechanical overload slipping clutch and automatic limit switches
Spares: hoist chains, rope guides, brake coils, contactors, and pendant cables

UTRANS Crane Automation, Control Panels, and Engineering Service

UTRANS engineers custom crane automation panels and smart material handling controls. Systems integrate industrial PLCs, electronic anti-sway algorithms, and ergonomic radio remote controllers. Field technicians deliver full maintenance, runway realignment, and commissioning services.

PLC-based crane control cabinets with Siemens or Schneider Electric hardware
HBC-radiomatic industrial radio transmitters and dynamic anti-sway control
Comprehensive runway survey, track realignment, electrical revamp, and commissioning
Spares: variable frequency drives, contactors, radio joysticks, and load cells

Industrial Crane Systems and Special-Purpose Handling Solutions

German manufacturer UTRANS Kran- und Transportanlagen GmbH designs advanced material handling and overhead crane systems for steel mills, manufacturing plants, ports, and heavy engineering facilities.

The portfolio encompasses single- and double-girder bridge cranes, semi-gantry cranes, slewing jib cranes, and severe-duty metallurgical cranes.

As an established DEMAG crane partner, UTRANS integrates standardized DEMAG DMR wire rope hoists with lifting capacities up to 50 tons, DC-Pro electric chain hoists, and modular KBK lightweight suspension tracks constructed from cold-rolled steel and anodized aluminum.

Engineering Design, Load Analysis, and Worldwide Equipment Integration

Specifying a UTRANS crane involves rigorous analysis of runway foundation capacity, building geometry, duty classification according to FEM/ISO norms, and environmental factors.

For high-temperature foundries and waste incineration facilities, cranes feature heavy heat shields, high-temperature wire ropes, and motorized clamshell grabs.

SpareX delivers comprehensive technical selection, direct coordination of DEMAG and UTRANS replacement parts, and engineering integration support for industrial operators across global markets.

UTRANS / UTRANS Kran- und Transportanlagen and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of UTRANS / UTRANS Kran- und Transportanlagen and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.