Knitter Switch / knitter-switch Industrial Switches and Electromechanical Controls

We configure and quote Knitter Switch toggle assemblies, knitter-switch illuminated pushbuttons, tactile switches and rotary coded DIP components by part number.

Toggle and Lever Switches

Knitter Switch (knitter-switch) toggle switch series MTA, MTE, MTG, MTL, and ATE provide heavy-duty electrical control in industrial automation panels. Units feature sealed lever mechanisms with silver or gold contact options for sensitive signals.

Sealed front panel mounting options with ingress protection ratings up to IP67 level
Switching configurations SPDT, DPDT, 3PDT, and 4PDT rated from 0.4 VA up to 6 A current
Actuator choices include standard, elongated, flat levers, and locking mechanisms
Operating ambient temperature envelope engineered from minus 45 to plus 85 deg C

Pushbutton and Illuminated Switches

Knitter Switch (knitter-switch) pushbutton switch lines MPA, APE, FP, MPBS, and MPE feature rugged housings with integrated LED illumination. These components ensure crisp tactile feedback and high mechanical stability under harsh operating plant conditions.

Integrated LED illumination available in red, green, yellow, blue, and white colors
Mechanical actuation endurance exceeds one million cycles for heavy equipment duty
Momentary and latching alternate action contact arrangements for operator panels
Termination styles include printed circuit board pins and quick solder wire lugs

Tactile Micro Switches and PCB Keys

Knitter Switch (knitter-switch) tactile switch families TSSF, TME, TMP, TMSE, and TS are built for dense printed circuit board mounting. They deliver precise actuation force profiles and consistent low contact resistance across long automated production runs.

Actuation snap force calibrated between 1.6 N and 2.6 N for positive tactile response
Surface mount SMT and through hole THT configurations with tight pin spacing
Sealed internal dome structure withstands reflow soldering and industrial washing
Ultra compact package footprints starting from 3 mm for high density board layouts

Rotary Coded and Dual-In-Line DIP Switches

Knitter Switch (knitter-switch) coded switches DRS, SDB, DPW, and DPL provide reliable hardware parameter configuration for industrial controllers. They ensure accurate bus address setting and operational mode selection using binary or hexadecimal formats.

Encoding options include BCD decimal, hexadecimal, and direct position stepping
Gold plated wipe contacts prevent oxidation during extended standby timeframes
Rotor actuator styles feature screwdriver slot, flush shaft, or extended thumb knob
Epoxy resin base sealing and top tape barriers guard against dust and moisture ingress

Slide and Miniature Selector Switches

Knitter Switch (knitter-switch) slide switch lines MMS, MMSP, MSS, and MFP offer multi-position linear circuit selection. These assemblies feature distinct detent indexing and high mechanical endurance along the precision slider guide track assembly.

Multi-throw selection configurations ranging from two up to six distinct indexed stops
Vertical top actuation and right angle horizontal slider mechanical orientations
Flame retardant thermoplastic engineering housing materials compliant with UL94V-0
Self-cleaning copper alloy contact blades with heavy silver electroplating

Vandal-Resistant and Heavy-Duty Metal Switches

Knitter Switch (knitter-switch) vandal-resistant switch lines MAV, PBP, and CTK feature robust stainless steel and brass housings. Built for outdoor kiosks, harsh plant machinery, and public terminals, they withstand heavy impacts and aggressive ambient exposures.

Front bezel fabricated from AISI 304 grade stainless steel or nickel plated brass
Mechanical impact resistance tested to IK10 industrial protection standards
Front panel ingress protection rating verified up to high level IP68 standard
Ring or central dot LED indicator lighting powered by 12 V or 24 V DC rails

Electrical Parameters and Contact Options of MTA and ATE Toggle Switches

Toggle switches from Knitter Switch (knitter-switch) series MTA and ATE are engineered for switching control circuits and auxiliary power loops in machine tool cabinets. When choosing the configuration for industrial automation, load specifications determine contact metallurgy.

For low level dry circuit logic signals up to 28 V DC, gold plated contacts prevent surface oxidation during long static intervals. For AC control circuits handling up to 250 V at 6 A, solid silver alloy contact buttons minimize electrical arc degradation.

O-ring lever seals protect the internal contact chamber against ingress of water, cutting fluids, and airborne aerosol droplets.

Integrating MPA Series Illuminated Pushbutton Switches in Operator Panels

Pushbutton controls from Knitter Switch (knitter-switch) series MPA with integrated LED indicator lighting mount directly onto operator desks and pendant panels.

When designing the electrical control scheme, power ratings must align with the integrated series resistors configured for either 12 V or 24 V DC operation.

The product line includes momentary push mechanisms for pulse start or reset commands alongside latching alternate action keys for circuit status holds.

The precision engineered mechanical plunger provides positive snap tactile feedback, allowing operators to clearly confirm command actuation even when wearing heavy industrial leather gloves.

Surface Mount Assembly Procedures for TSSF and TMSE Tact Switches

Tactile switches from Knitter Switch (knitter-switch) families TSSF and TMSE are tailored for high density surface mounting on machine controller printed circuit boards.

When assembling through automated convection reflow lines, temperature curves must stay within the specified peak limit of 260 degrees Celsius.

The switch housings utilize high temperature engineering polymers sealed with protective polyimide tape to prevent liquid flux penetration into the internal metal dome cavity.

To eliminate accidental triggering from shop floor mechanical vibration, actuators calibrated to 2.6 N force are selected to deliver crisp physical confirmation.

Hardware Address Configuration with Rotary Coded and DIP Switches

Coded switches from Knitter Switch (knitter-switch) series DRS, DPW, and DPL provide robust hardware addressing for fieldbus nodes including Profibus, CANopen, and Modbus networks.

Depending on network addressing architecture, output schemes feature either decimal BCD from 0 to 9 or full hexadecimal 16-position encoding with standard or complementary pin logic.

Self-cleaning gold plated wiping contact blades maintain low contact resistance below 80 milliohms throughout the service life of the control board. Protective rotor caps and epoxy bottom sealing prevent metal chips and abrasive shop dust from affecting electrical continuity.

Implementing MMS and MSS Slide Switches in Measuring Instrumentation

Multi-throw slide switches from Knitter Switch (knitter-switch) series MMS and MSS are employed in precision test instruments, mobile field calibrators, and sensor signal conditioners. The internal detent mechanism delivers two to six physical indexing stops with consistent tactile drag.

Specifiers can choose between top actuation for panel cutouts or right angle side actuators for perimeter access through equipment enclosures.

The moving contact sliders are stamped from resilient phosphor bronze with electroplated silver surfaces, ensuring low electrical noise and stable contact resistance across frequent range switching cycles.

Installation Guidelines for MAV Vandal-Resistant Metal Switches

Vandal-resistant switches from Knitter Switch (knitter-switch) series MAV are machined from solid AISI 304 stainless steel or nickel plated brass bar stock.

They are built for outdoor ticketing kiosks, material handling consoles, and factory machines exposed to mechanical impacts and chemical washdowns.

Front bezels incorporate elastomeric sealing gaskets providing IP68 ingress protection, while the heavy-duty metal actuator complies with rigorous IK10 mechanical impact ratings.

Optional homogeneous LED ring lighting delivers high visibility under low ambient illumination across industrial facility control panels.

Knitter Switch / knitter-switch and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Knitter Switch / knitter-switch and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.