Brandner GmbH valves and compressor components

Brandner GmbH high pressure valves: B-03 lever valves, B-01 rotary heads, B-09 pressure reducers up to 420 bar, and automated filling manifolds.

B-03 series lever operated filling valves with self venting

B-03 series lever valves deliver dependable filling performance for compressed air and technical gas cylinders. The ergonomic lever actuation enables rapid opening with minimal wrist motion, an integrated muffler dampens exhaust noise, and sintered bronze filters prevent particulate wear.

Ergonomic lever stroke designed for effortless filling and venting cycles
Integrated porous sintered bronze filter protecting sensitive valve seats
Integrated silencer reducing pressure exhaust acoustic noise emissions
Tight sealing capability engineered for high pressure circuits up to 360 bar

B-01 and B-02 series rotary valves and storage cylinder heads

B-01 rotary valves and B-02 storage vessel valves incorporate deep groove radial ball bearings, ensuring effortless handwheel actuation under peak line pressures. Available with 1.125-12 UNF inlet threads and metric ports, units mount directly into storage banks and distribution consoles.

Radial deep groove ball bearing ensuring smooth handwheel rotation under load
Precision 1.125-12 UNF threading engineered for high pressure storage tanks
Integrated venting passage enabling safe depressurization of line connections
Corrosion resistant brass and stainless steel housing for extended endurance

B-09 series industrial pressure reducers and regulators up to 420 bar

B-09 series pressure reducers provide precision secondary pressure stabilization across high pressure gas and pneumatic networks. The refined adjustment mechanism eliminates whistling vibrations while maintaining steady downstream pressures despite inlet pressure swings up to 420 bar.

Precision downstream pressure adjustment across ranges reaching 100 and 200 bar
Quiet valve stem actuation eliminating whistling noise and flow resonance
Specialized oxygen compatible variants featuring degreased internal channels
Resilient regulation under elevated compressor inlet pressures up to 420 bar

B-13 series safety relief valves and pressure limiter units

SV 3.6/225 and SV 3.6/330 safety relief valves protect downstream receivers and gas piping from excessive pressure build up. Featuring immediate excess medium discharge upon reaching calibrated thresholds, they re-seat with zero leakage once line pressures return to rated levels.

Factory calibrated release setpoints for 225 bar and 330 bar protection
Immediate full bore relief discharge protecting receivers and compressors
Dependable valve seat re-engagement with bubble tight sealing after relief
Dedicated B-98 mounting brackets and lock nuts for firm panel installation

B-16 and B-17 series automated filling panels and manifold units

Dual pressure filling panels B-16 and B-17-025 sequencing modules automate cylinder refilling routines without requiring electrical wiring to the compressor. Pneumatic valve piloting eliminates operator handling oversights and optimizes gas transfer from buffer storage banks.

Autonomous B-17-025 sequencing logic without electrical links to compressor
Dual pressure architecture accommodating simultaneous 200 and 300 bar ports
Pneumatic valve piloting minimizing heat build up in sensitive cylinders
B-04 filling whip connectors equipped with mechanical flow-stop mechanisms

B-06 and B-08 series high pressure manifolds and coupling adapters

B-08 extruded aluminum manifolds featuring 5 and 6 outlet ports streamline gas routing across compressor installations operating up to 360 bar. The B-06 adapter range provides DIN, CGA, and oxygen transitions to unite components across disparate international standards.

Solid milled manifold blocks featuring 5 and 6 outlet ports up to 300 bar
Extensive B-06 transition adapter portfolio bridging DIN and CGA standards
Oxygen adapter fittings conforming to EN 144-2 with degreased flow passages
Protective dust caps B-07 featuring vent orifices for safe field disconnection

Brandner GmbH enterprise background and high pressure technology focus

Austrian manufacturing enterprise Brandner GmbH has focused on precision mechanical fabrication, fixture engineering, and high pressure fluid equipment for more than six decades. The production headquarters is located in Roitham am Traunfall in Upper Austria.

Since 1980, the company has concentrated engineering resources on high pressure compressor equipment, automated filling panels, gas distribution manifolds, and specialized valve hardware.

The factory operates multi-axis computer numerical control machining centers that deliver contract manufacturing alongside standard valve product lines.

Design principles of B-03 lever valves with integrated venting and silencing

Proprietary lever operated valves across the B-03-002, B-03-010, and B-03-012 series are engineered by Brandner for safe filling of high pressure gas cylinders.

Unlike conventional handwheel threaded valves requiring repeated rotational turns, B-03 units actuate through an ergonomic lever flicked by minimal wrist movement.

An integrated exhaust silencer dampens venting noise when depressurizing flexible whips, allowing quiet operation in indoor stations without personal hearing protection gear.

An internal sintered bronze filter element intercepts particulate debris, protecting sensitive seating surfaces against abrasive erosion.

B-01 rotary heads and B-02 storage vessel valves under elevated pressures

For stationary buffer vessels, gas cylinder banks, and distribution racks, Brandner manufactures the B-01 rotary valve and B-02 storage vessel valve series. A decisive engineering feature is the incorporation of a radial deep groove ball bearing within the handwheel spindle mechanism.

This arrangement prevents mechanical binding and excessive turning torque when opening valves under peak line pressures reaching 360 bar.

Valves feature standardized 1.125-12 UNF inlet threading for direct installation into high pressure cylinder necks, along with metric ports and integrated venting paths for depressurizing couplings.

B-09 pressure reducers and B-13 safety relief valves up to 420 bar

Dependable overpressure protection and stable gas delivery are provided by B-09 pressure reducers and B-13 spring loaded safety relief valves.

Regulators across the B-09-064 and B-09-067 series accommodate inlet line pressures up to 420 bar, delivering smooth secondary regulation down to 100 or 200 bar without harmonic whistling resonance. Direct acting spring safety valves SV 3.6/225 and SV 3.6/330 undergo factory calibration.

Upon exceeding pressure setpoints, valves vent excess volume and re-seat with zero leakage once line pressures return to safe operating levels.

Automated manifold switching and B-16 and B-17 gas filling equipment

For modern filling stations and breathing gas stations, Brandner engineered B-16 dual pressure filling panels and B-17-025 sequencing logic modules. The B-17-025 module functions entirely on pneumatic logic without requiring electrical wiring to the compressor unit.

The module monitors cylinder backpressure and sequences buffer storage banks in optimal order. This limits thermal build up in composite gas cylinders, speeds up turnaround, and prevents operator handling oversights.

Filling whips feature quick connection adapters and rigid B-04 tubes with mechanical flow-stop shut-off mechanisms.

B-08 distribution manifolds, B-06 transition adapters, and tube bending tools

Gas routing within compressor skids and control panels relies on B-08 extruded aluminum manifolds offering 5 or 6 outlet ports. The solid manifold blocks withstand working pressures up to 300 bar, providing neat mounting points for pressure transmitters, sensors, and gauges.

The extensive B-06 adapter range bridges European DIN standards with American CGA standards and EN 144-2 oxygen cylinder threads.

For field plumbing, Brandner provides B-98 manual tube bending fixtures engineered for precision bending of calibrated hydraulic and gas tubes from 6 to 12 mm outer diameter.

Brandner GmbH and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Brandner GmbH and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.