Tramev Industrial Wire and Cable Machinery

Selection and quotation of Tramev heavy equipment and replacement parts for wire drawing, cable manufacturing and metal derivative processing plants.

Tramev PROCUT, RC and MU Series Hydraulic and Battery Wire Cutters

Portable battery-powered and electrohydraulic cutting shears from Tramev including PROCUT12-BN, RC-16, MU-16BN and MU16 models are engineered for clean separation of high-tensile wire and metal rods. Each tool features a fully rotating head and hardened replaceable alloy cutting blades.

Cutting capacity up to 16 mm diameter: hardened alloy steel blades deliver clean burr-free ends
Autonomous 18V lithium-ion battery packs provide up to 200 reliable cuts per full charge
Full 360-degree rotating cutter head simplifies work in tight drawing machine installations
Integrated hydraulic thrust up to 120 kN prevents distortion of wire ends during rapid cycle

Tramev TC140N, F130N and F145N Heavy-Duty Hydraulic Cable Cutters

Heavy-duty double-acting hydraulic cable shears from Tramev including TC140N, F130N, F145N and F170N series are engineered for industrial cutting of armored electrical cables, steel wire ropes and metal strands. The heavy frame couples with external 700-bar mobile hydraulic power packs.

Armored cable and rope separation up to 145 mm powered by double-acting hydraulic cylinder
Operating hydraulic pressure up to 700 bar ensures effortless cutting of multi-strand structures
Curved alloy blades prevent conductor crushing while maintaining perpendicular flat profiles
Quick-connect couplings for high-pressure hydraulic hoses with integrated protective valves

Tramev TRA-16 and TRA-25 Industrial Wire Pointing Machines

Heavy industrial wire pointing machines from Tramev models TRA-16 and TRA-25 are engineered for rapid tapering of wire and rod ends prior to threading into drawing dies. The unit features four eccentric rolling cylinders that form a precise conical point through cold plastic deformation.

Model TRA-16 handles wire diameters from 6 to 16 mm: reliable formation of conical ends
Model TRA-25 covers diameters from 17 to 25 mm: smooth tapering of high-tensile wire coils
Four hardened alloy steel eccentric rollers provide long operational life without deformation
Optional integration with Tramev portable shears for simultaneous end trimming and pointing

Tramev Heavy Wire Drawing Monoblocks and Drawing Lines up to 32 mm

Heavy-duty wire drawing monoblocks and processing lines from Tramev with horizontal and vertical capstan configurations are engineered for calibration and dry drawing of wire up to 32 mm diameter. Installations feature tungsten carbide coated drums, water cooling and planetary gear reducers.

Wire diameter processing capability up to 32 mm: robust electric motors for metal wire
Horizontal and vertical axis capstans optimize workshop layout and floor footprint in plants
Drawing capstans with tungsten carbide surface treatment ensure extended wear life and pull
Integrated internal water cooling circuits for drawing blocks and continuous die lubrication

Tramev HTRS and TRS Series Heavy Wire Butt Welding Machines

Stationary and mobile wire butt welding machines from Tramev including HTRS-2, HTRS-3, TRS-HTRS4 and TRS-3V series are built for resistance butt welding of wire ends up to 32 mm diameter. Machines produce homogenous joint tensile strength for continuous uninterrupted drawing mill operations.

Resistance butt welding of wire up to 32 mm diameter with integrated post-weld joint annealing
Pneumatic and hydraulic clamping jaws made from high-conductivity hardened copper electrode alloy
Automatic welding and upsetting cycle with electronic monitoring of welding current and thrust
Integrated trimming shears and deburring grinder remove flash prior to feeding wire into dies

Tramev PZ Coil Grippers and SR-517 Industrial Metal Banding Shredders

Tramev workshop equipment includes internal coil grippers (PZ400TR, PZ600TR, PZ900TR) for secure lifting of wire bundles up to 4 tons without surface damage, alongside the SR-517 scrap chopper designed to shred metal packing bands and linear wire scrap at an impressive 20-to-1 volume reduction.

Internal coil lifting pliers with capacity up to 4000 kg: self-locking mechanical gripping link
Vulcanized polyurethane jaw coating prevents scratching of outer and inner finished wire coils
SR-517 shredder chops metal strapping bands into 75 mm segments at high throughput speed
Reversible alloy cutting knives feature four indexing cutting edges for extended service life

Industrial Heritage and Engineering Excellence of Tramev S.r.l. Since 1977

Italian machinery manufacturer Tramev S.r.l. was established in 1977 in Cesana Brianza, within the Lecco industrial district of northern Italy. This geographic area represents one of Europe's premier industrial clusters for wire production, drawing equipment and wire processing.

Over nearly five decades of dedicated technological focus, Tramev has developed into a renowned specialist in portable electrohydraulic cutting tools, heavy drawing machinery, pointing units and automated wire handling systems.

Today, Tramev machinery operates in wire drawing mills, cable plants and fastener factories across more than fifty industrial nations worldwide, delivering exceptional mechanical durability.

Engineering of Tramev Portable Electrohydraulic Tools and Battery Shears

Tramev portable cutting shears across PROCUT, RC and MU series are purpose-built for heavy industrial duties in wire drawing workshops. Integrated 18V lithium-ion battery drives and high-pressure hydraulic cylinders generate concentrated cutting forces up to 120 kN.

Tool cutting blades are machined from high-grade alloy tool steel subjected to vacuum heat treatment, preventing chipping when cutting high-tensile spring steel, prestressed wire and hardened fasteners.

A full 360-degree rotating cutter head provides effortless operator access within tight machine confines and wire drawing capstan areas without requiring line shutdown.

Heavy-Duty Cable Cutting Solutions for Armored Conductors and Steel Ropes

Industrial cutting of heavy armored electrical cables, multi-strand wire ropes and overhead conductors demands specialized cutting geometry.

Tramev TC140N, F130N and F145N series double-acting hydraulic shears connect to portable 700-bar hydraulic power units to deliver smooth, high-tonnage cutting action.

The curved profile of the hardened alloy cutting blades encircles the cable to prevent strand flattening and core deformation, guaranteeing a perpendicular flat cut.

The rigid forged steel frame absorbs peak hydraulic reaction forces, significantly extending the service life of internal hydraulic seals and blades.

Tramev Wire Drawing Monoblocks and TRA Series Wire Pointing Machines

Tramev wire drawing machinery portfolio includes heavy-duty horizontal and vertical capstan monoblocks engineered for wire calibration and dry drawing of diameters up to 32 mm.

Pulling drums feature wear-resistant tungsten carbide coatings and internal liquid cooling circuits for thermal stabilization. To prepare wire ends before threading through tungsten carbide drawing dies, Tramev manufactures TRA-16 and TRA-25 cold-rolling pointing machines.

Four eccentric rolling cylinders progressively reduce the wire end without generating longitudinal surface defects, streamlining threading into the drawing die.

Wire Butt Welding Systems, Coil Handling Pliers and Metal Scrap Choppers

Continuous wire drawing operations rely on high-strength butt welding. Tramev manufactures HTRS-2 and HTRS-3 resistance butt welders that join wire ends up to 32 mm with controlled post-weld joint annealing.

In-plant logistics of heavy wire coils up to 4 tons is handled by PZ400TR, PZ600TR and PZ900TR internal lifting tongs equipped with vulcanized polyurethane jaw pads to prevent surface scratching.

Scrap management is streamlined by the SR-517 scrap chopper, which cuts metal strapping bands and linear wire waste into 75 mm pieces, achieving a twentyfold reduction in scrap volume.

Technical Selection and Fulfillment of Tramev Machinery and Replacement Parts

SpareX provides comprehensive engineering selection and B2B fulfillment of technical-specification replacement parts, wearing items and tooling for Tramev machinery.

Our technical specialists assist manufacturing plants in selecting replacement cutting blades, hydraulic cylinder seal kits, TRA pointing rollers, drawing capstans, butt welding electrode jaws and PZ coil gripper parts according to factory equipment nameplates and technical manuals.

All components are delivered with full commercial documentation, manufacturer conditions and dependable international freight logistics.

Tramev and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Tramev and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.