Transtecno industrial gearboxes and drive systems

Modular gearboxes, speed reducers, and drive motors from Transtecno deliver dependable torque transmission across industrial conveyors, packaging lines, and mobile machinery.

Transtecno CM worm gearboxes and CMM modular combinations

Transtecno worm gear units across model sizes CM026 through CM130 engineered in die-formed aluminum housings provide reliable transmission for conveyor belts and sorting lines. The precision mechanical pairing ensures low operating vibration and high mechanical efficiency.

Ground steel worm shaft paired with high-tensile bronze wheel component
Center distances spanning 26 to 130 mm with single ratios up to 1 to 100
Modular assembly of double reduction CMM units with ratios up to 10000
Lifetime synthetic lubricant formulated for wide industrial temperature ranges

Transtecno CMG inline helical gear reducers

Inline helical gearboxes in the Transtecno CMG01 through CMG04 range feature rigid aluminum housings engineered for sustained radial shaft loads. Precision-ground gear teeth transmit dynamic torque up to 500 Nm with high energy efficiency across industrial machinery.

Four standard sizes CMG01 through CMG04 with IEC motor mounting flanges
Mechanical gear transmission efficiency reaching up to 98 percent per stage
Heavy-duty output shaft bearings engineered to resist external belt tension
Selection of hollow bore diameters, torque arms, and foot plates via code

Transtecno CMB bevel helical angular gearboxes

Bevel helical gear units from the Transtecno CMB402 to CMB903 series integrate a precision hypoid first reduction with secondary helical stages. The right-angle layout yields quiet operation and dynamic torque delivery up to 500 Nm for space-restricted industrial conveyors.

Carburized and ground hypoid bevel gears for smooth rotational torque transfer
Ninety-degree right-angle layout housed in a compact aluminum structure
Hollow output shafts with keyways alongside plug-in solid output shafts
Multi-surface mounting options supporting foot, flange, or shaft assembly

Transtecno IRON heavy-duty speed reducers

The IRON product range encompasses ITH inline units, ITB bevel helical boxes, and ITS parallel shaft speed reducers molded in heavy gray iron frames. These robust drives withstand shock loads across mining, metallurgical, and bulk handling machinery with torques up to 3500 Nm.

High-strength G200 iron frames dampening structural vibration spikes
Continuous industrial torque ratings delivering up to 3500 Nm capacity
Broad reduction ratio spectrum from 5 to 300 for heavy apron conveyors
Shaft-mounted and flanged output styles with oversized hollow bores

Transtecno ALU DC permanent magnet gearmotors

The Transtecno ALU DC series pairs 12V and 24V brushed direct current motors with compact worm or helical gear units. These mobile drives power automated guided vehicles, agricultural spreaders, medical lifts, and battery-driven industrial automation systems with smooth torque control.

Brushed electric motors using ferrite EC magnets or rare-earth ND magnets
Direct current supply at 12V and 24V with power ratings from 30W to 800W
Direct modular coupling to CM worm, CMG inline, and CMB bevel gear units
Optional integration of incremental encoders and electromagnetic brakes

Transtecno ALU BLDC brushless gearmotors

Transtecno ALU BLDC brushless gear units integrate high-efficiency 24V, 36V, and 48V motors with precision planetary P series or angular reducers. Elimination of mechanical brushes yields spark-free operation, extended operational life, and responsive speed regulation across robotics.

High-efficiency brushless motors covering power ranges from 60W to 660W
Integration with precision planetary P reducers for high positioning repeatability
Built-in digital Hall sensors providing rotor position signals to inverters
High peak overload margin and continuous quiet running without brush wear

Kinematics and service life of Transtecno CM and CMM worm gear units

Modular worm gear reducers from the Transtecno CM family and double reduction CMM units are built for motion drives requiring high reduction ratios within compact mechanical envelopes.

The alloy steel worm shaft is paired with a centrifugally molded phosphor bronze gear ring, suppressing dynamic sliding friction while stabilizing thermal equilibrium. Molded aluminum enclosures across sizes CM026 to CM130 ensure structural rigidity and alignment for input and output shaft bearings.

Factory-filled synthetic gear fluid eliminates routine oil replacement under normal industrial operating envelopes. The gearing dampens sudden shock loads in belt feeders and bulk filling systems.

Dynamic performance and mechanical efficiency of CMG inline gearboxes

Transtecno CMG inline helical gear speed reducers are tailored for industrial process lines demanding high energy efficiency and steady output speeds. Gear wheels in each reduction step undergo heat treatment and gear flank tooth grinding, reducing acoustic operational noise and gear mesh friction.

A one-piece aluminum frame provides heat dissipation during uninterrupted continuous duty in pump and ventilation assemblies. Detachable IEC input flanges simplify direct mounting to standard alternating current electric motors without intermediate couplings.

Heavy-duty output bearings sustain external overhung radial loads from belt pulleys.

Drive layout and power distribution of CMB bevel helical gear reducers

Angular speed reducers from the Transtecno CMB line combine a hypoid bevel input stage with helical gear reductions. This architecture achieves high mechanical efficiency compared to conventional worm drives, delivering output torque capacity up to 500 Nm in a slim profile.

The perpendicular right-angle shaft orientation enables equipment builders to position motor drives parallel to conveyor side frames, saving floor space. Hollow output bores with standard keyways mount directly onto driven machine shafts with torque arm retention.

Protective surface coatings guard against moisture in washdown food processing facilities.

Structural durability of heavy IRON series speed reducers

The heavy-duty Transtecno IRON drive family includes ITH inline units, ITB bevel helical boxes, and ITS parallel shaft speed reducers constructed from high-grade G200 gray iron.

Thick-walled iron frames absorb mechanical vibration and endure severe shock stresses when transmitting dynamic torques up to 3500 Nm. Precision-machined helical gearing delivers power transmission across mining extraction machinery, asphalt mixing plants, and industrial agitators.

An enlarged internal oil reservoir with dual sight glasses prevents localized overheating in continuous duty. Auxiliary double-lip oil seals shield against abrasive dust ingress.

Engineering characteristics of ALU DC permanent magnet gear units

Transtecno ALU DC gearmotors are engineered for machinery operating from 12V and 24V industrial battery power sources. The drive packages incorporate brushed direct current motors from the EC permanent ferrite series alongside high-flux ND neodymium units.

Modular interfaces allow technicians to assemble motors directly with CM worm, CMG inline, or CMB bevel gear units without extra mechanical hardware.

Optional integration of optical incremental encoders and electromagnetic power-off safety brakes facilitates accurate motion positioning across automated guided vehicles, mobile agricultural sprayers, and material lifts.

Operational benefits of ALU BLDC brushless motors and planetary units

Transtecno ALU BLDC brushless gearmotor solutions serve automated drive systems requiring long operational life, broad speed control ranges, and high positioning accuracy.

Brushless direct current motors running on 24V, 36V, and 48V operate without sliding carbon brushes, eliminating arcing sparks, reducing electrical interference, and extending bearing durability. Coupling to high-precision planetary P reducers delivers torsional stiffness with low angular backlash.

Built-in digital Hall sensors supply rotor speed and position feedback to external servo drives, maintaining steady torque from low speeds up to maximum rated RPM.

Transtecno and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Transtecno and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.