Golten terminal blocks and industrial connectors for automation

Golten terminal blocks: pluggable connectors 2EGTK, PCB blocks, DIN rail modules, and electronic housings. Engineering selection from technical data.

Ningbo Golten Electronics pluggable and modular terminal blocks

Founded in 2013, Ningbo Golten Electronics manufactures dependable terminal blocks and modular electronic enclosures for automation panels. In-house full-chain manufacturing integrates precision mold tooling, flame-retardant PA66 molding, and automated CCD visual inspection.

Specialized electrical manufacturing facility established in the Cixi industrial zone
In-house precision mold development workshop and automated assembly inspection lines
Flame-retardant PA66 polymer insulator bodies rated to UL94V-0 safety requirements
High-conductivity copper alloy contact elements with electroplated tin wire interfaces

Series 2EGTK 5.0 mm pitch pluggable screw terminal blocks

Heavy-duty 2EGTK series pluggable connectors featuring 5.0 mm contact spacing provide rapid field cabling for industrial control cabinets. The units support electrical ratings up to 20 A and 320 V, delivering dependable screw-cage clamping across 28 to 12 AWG conductors.

Standardized 5.0 mm contact pitch configuration with terminal poles from 2 to 24 ways
Heavy-duty continuous operating current up to 20 A with insulation rated to 320 V
Robust screw-cage wire clamp mechanism providing calibrated tightening torque of 0.4 Nm
Accommodates rigid and flexible wiring cores spanning 1.0 to 2.5 square millimeters

Compact 15EGTKNM series 3.5 mm pitch pluggable connectors

Subminiature 15EGTKNM pluggable connectors featuring a tight 3.5 mm pitch deliver reliable signal routing within high-density control electronics. The components handle operating currents up to 8 A at 250 V while maintaining excellent dielectric isolation across adjacent pins.

Reduced 3.5 mm pin layout tailored for compact controller printed circuit assemblies
Rated electrical current of 8 A with operational dielectric rating reaching 250 V
Precision terminal clamping suited for fine signal conductors spanning 28 to 16 AWG
Rugged polyamide insulating body supporting wide operating temperatures from -40 to 105 C

Screw and spring PCB terminal blocks for circuit boards

Through-hole PCB terminal blocks from Golten establish direct wiring connections for power and sensor signals without intermediary interfaces. Screw-cage and spring-clamp product families guarantee dependable vibration endurance within switching power supplies and drive units.

Through-hole solder pins compatible with wave soldering on printed wiring boards
Spring-loaded and screw mechanisms supporting swift conductor termination on site
High mechanical resilience against continuous vibration stress and thermal cycling
Modular interlocking block design permitting arbitrary pole counts per connector block

Feed-through and ground DIN rail blocks with Push-in wiring

The modular terminal block series engineered for standard 35 mm DIN rails optimizes power routing within industrial distribution cubicles. Featuring tool-free Push-in spring technology alongside classic screw connections, the blocks accelerate panel building and simplify commissioning.

Secure snap-on mounting profile engineered for standard 35 mm wide mounting rails
Push-in spring technology allowing effortless wire insertion without hand tools
Available in feed-through, protective earth ground, and multi-level configurations
Integrated marking tag slots and dedicated plug test points for fast loop checks

Modular DIN rail electronic housings and I/O module boxes

Engineered plastic DIN rail enclosures from Golten provide rugged protective housing for embedded controllers, interface relays, and signal isolators. The enclosures feature integrated pluggable terminal ports, transparent front covers, and internal guide slots for circuit cards.

Standardized modular snap-fit profiles tailored for 35 mm mounting rail assemblies
Full structural integration with matching pluggable terminal blocks for field I/O
Internal card slot ribs ensuring firm positioning of horizontal and vertical PCBs
Flame-retardant insulating polymer preventing electrical tracking under high humidity

Ningbo Golten Electronics manufacturing history and production capacity

Established in 2013 within the industrial hub of Cixi in Ningbo, Ningbo Golten Electronics Co., Ltd. specializes in full-chain design and production of terminal blocks and electronic connectivity components.

The enterprise operates an in-house precision mold workshop, advanced automated polymer injection molding presses, and high-speed metal stamping tools for copper alloy contact fabrication.

Integrated automated assembly lines with CCD optical testing eliminate physical deviations and maintain uniform contact force.

Holding National High-tech Enterprise status, the organization launched a smart factory initiative in 2026 spanning over 30,000 square meters to expand international connector deliveries across automation sectors.

Pluggable terminal block series 2EGTK with 5.0 mm contact pitch

The flagship 2EGTK pluggable connector family featuring 5.0 mm pin spacing handles power and control wiring within industrial distribution panels and PLC enclosures.

The system comprises a plug connector with screw-clamp terminals and a mating header soldered directly onto the printed wiring board, allowing swift disconnect during equipment maintenance.

Components handle operating voltages up to 320 V and continuous current ratings reaching 20 A with wire sizes from 1.0 to 2.5 square millimeters.

The elevator screw-clamp design utilizes M2.5 and M3 threads to secure wire strands without pinching, providing a calibrated torque of 0.4 Nm across an operating temperature range from -40 to 105 C.

Compact pluggable terminal blocks series 15EGTKNM with 3.5 mm pitch

For compact instrumentation units, field sensors, and distributed I/O modules, Golten manufactures subminiature 15EGTKNM pluggable connectors featuring a narrow 3.5 mm contact pitch.

The reduced center-to-center spacing minimizes printed circuit board real estate while maintaining high dielectric strength and convenient field maintenance.

The connectors support operating currents up to 8 A at 250 V for signal wiring conductors from 28 to 16 AWG.

The insulating body is molded from flame-retardant PA66 polymer rated to UL94V-0, safeguarding contacts against thermal stress while polarization ribs prevent incorrect alignment during installation.

Screw and spring terminal blocks for printed circuit board mounting

For permanent cable termination directly on circuit boards in switching power supplies and drive units, Golten provides a broad portfolio of PCB Screw and PCB Spring terminal blocks.

Rigid solder pins are optimized for standard wave soldering and endure mechanical vibration during industrial operation.

Tool-free spring versions facilitate instant connection of solid and stranded wires through simple lever actuation, reducing assembly time. The modular side-latch profile allows technicians to combine smaller units into multi-pole terminal strips with dependable structural rigidity.

Modular DIN rail terminal blocks for industrial control enclosures

The modular terminal block series for 35 mm DIN rails facilitates power routing and signal distribution within control cabinets. The range encompasses classic screw terminals, spring-clamp modules, and Push-in wiring units where stripped conductors insert directly without specialized tools.

The lineup includes feed-through single-level and multi-level units, protective ground modules in yellow-green bodies with metallic foot grounding, and disconnect blocks. Standardized labeling slots accept marking tags, while integrated test sockets allow loop probing during commissioning.

Industrial enclosures for electronic assemblies and I/O modules

Golten DIN rail plastic enclosures provide rugged physical protection for embedded electronics, relay interfaces, and signal conditioning boards. The enclosure architecture features ventilation slots for convective heat dissipation and internal guide ribs for solderless circuit board retention.

The enclosure bodies align seamlessly with Golten pluggable terminal blocks to form integrated modular assemblies for panel installation. High-grade insulating polymer guarantees mechanical durability and stable dielectric properties during round-the-clock industrial duty.

Golten and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Golten and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.