Feida Yongfeng industrial electrical connectors

Feida Yongfeng connectors: heavy-duty MIL-C-5015 series, reverse bayonet VG95243 connectors, universal P series, and aviation GX interfaces for automation.

Heavy-duty circular connectors MIL-C-5015 and GJB600 standard series

Threaded heavy-duty connectors conforming to MIL-C-5015 standard endure severe industrial factory settings. Rugged alloy housings with protective plating accommodate 2 to 26 contact pins, delivering secure electrical linkage across robotic drives, automated machines, and power panels.

Threaded coupling mechanism engineered to prevent vibration loosening in drives
Standardized shell sizes from 10SL up to 32 with silver-plated contact pins
Resilient aluminum alloy housing with protective finish against severe corrosion
Withstand intense mechanical shocks and operational vibrations on plant floors

Waterproof reverse bayonet connectors VG95243 specification series

Rapid-mating connectors in the VG95243 series utilize a reverse bayonet lock requiring only a 120-degree rotation for single-handed operation. Resilient elastomer seals provide IP67 ingress protection against moisture and dust during vibration stress on railway rolling equipment.

Reverse bayonet lock with audible tactile detent preventing accidental release
Full IP67 environment sealing achieved with oil-resistant synthetic rubber rings
Standardized shell sizes 10SL, 14S, 16S, 18, 20, and 22 for demanding field wiring
Continuous shielding path shielding low-level signals from electrical noise

Universal industrial circular electrical connectors across P series

Versatile circular connectors in the P series are manufactured in field-assembled and pre-wired configurations for general machinery wiring. Shell dimensions spanning P12 to P40 with 2 to 32 pins accommodate both heavy motor power and sensitive instrumentation signal connections.

Field-attachable plugs alongside integrated molded flexible cable assemblies
Broad diameter shell selections P12, P16, P20, P24, P28, P32, and P40 formats
Reversible pin and socket contact layouts preventing incorrect circuit mating
Flexible panel installation using four-hole square flanges or rear lock nuts

Industrial power distribution circular connectors across PT series

Power connectors in the PT series serve machine power distribution, external lighting fixtures, and industrial workshop control switchboards. Units across PT20, PT24, and PT28 provide rugged metallic housings protecting internal contacts against physical impact and external moisture.

Housing sizes PT20, PT24, and PT28 accommodating various flexible cable sizes
Heat-resistant dielectric inserts with superior resistance against flashover
Threaded coupling collar with knurled surface enabling positive tool locking
Cable grip clamps and rubber strain-relief boots preventing sharp conductor bend

Weatherproof sealed industrial electrical connectors across PW series

Moisture-resistant connectors in the PW series are built to withstand continuous dampness, industrial cleaning sprays, and particulate dirt. The PW20 unit incorporates multi-stage rubber sealing across cable entries and mating joints, guaranteeing dependable control operation outdoors.

Sealed housing dimension PW20 with robust cable clamping and internal gaskets
Multi-ring sealing gaskets fabricated from oil-resistant elastomer compounds
High ultraviolet resistance protecting outer insulation against sun exposure
Interior contacts remain protected against condensation buildup in humid shops

Metric industrial aviation circular connectors in M and GX series

Circular metric connectors across the M and GX series serve position feedback sensors, incremental rotary encoders, stepper actuators, and communication electronics. Sizes ranging from 12M to 50M with screw collars establish firm electrical continuity and physical resilience.

Extensive coupling diameters spanning 12M, 16M, 20M, 25M, 30M, 35M, 40M, and 50M
Contact pin arrangements from 2 to 20 poles for analog and power transmission
Durable zinc alloy construction treated with bright nickel protective plating
Polarized keyway grooves preventing improper pin alignment during mating steps

Ningbo Beilun Feida Yongfeng factory development and manufacturing capabilities

Manufacturing enterprise Ningbo Beilun Feida Yongfeng Electric Appliance Co., Ltd. has developed and fabricated specialized industrial electrical connectors for over two decades.

The production facility is situated within Daqi Industrial Zone, Beilun District, Ningbo City, Zhejiang Province, occupying an operational floor area of 7,000 square meters.

The plant utilizes advanced numerical control turning centers, injection molding equipment, and dedicated electrical testing instrumentation. The organization retains eighty qualified personnel, including thirty specialized engineering staff members.

The factory portfolio encompasses sixty product families and over eight thousand connector configurations serving factory automation, machine tools, servo drives, and transport systems.

Design and engineering standards of MIL-C-5015 heavy-duty connectors

Heavy-duty threaded connectors in the 5015 family are engineered in strict compliance with the American military standard MIL-C-5015 and the national GJB600 specification.

Fabricated from high-strength aluminum alloy treated with protective surface chemical passivation, these units provide enduring resistance against workplace corrosion and aggressive plant atmospheres.

Cylindrical threaded coupling collars with anti-loosening mechanisms prevent disconnection under continuous vibrations from stamping presses and metalworking machinery. High-temperature dielectric inserts hold between two and twenty-six silver-plated contact pins.

Nine shell sizes from 10SL to 32 transmit primary motor power and servo feedback signals.

Rapid-mating waterproof reverse bayonet connectors in VG95243 series

Reverse bayonet connectors across the VG95243 series adhere to demanding European railway engineering rules, incorporating a 120-degree rotation locking mechanism. This design delivers rapid connection and disconnection of cabling bundles in confined machine envelopes.

The coupling sleeve incorporates three precision guide tracks and an internal wave spring that locks mating halves with an audible tactile detent. Resilient synthetic rubber gaskets and perimeter seals maintain environmental isolation conforming to IP67 standards.

These units are widely deployed on railway rolling equipment, outdoor heavy machinery, and robotic welding lines.

Universal circular P series connectors for automation and machine wiring

Multi-purpose circular connectors within the P series represent a standard solution for interconnecting electronic modules in control switchboards, machine tools, and monitoring instruments.

The line features seven physical diameters from P12 up to P40, accommodating two to thirty-two contact arrangements. Plant engineers can select between field-soldered versions for custom onsite assembly and factory-potted flexible wiring assemblies.

For equipment enclosure integration, the series offers four-hole square flanges (type H) as well as rear jam nut panel mounts (type B). Contact pins ensure negligible interface resistance and protection against surface oxidation.

Metric aviation circular connectors in M and GX series for sensor interfaces

Compact circular connectors across metric M and GX series serve as standardized physical interfaces for feedback sensors, optical linear scales, angular resolvers, and industrial serial buses.

Shells are formed from durable zinc alloy finished with bright electroplated nickel, ensuring mechanical rigidity and shielding against external electromagnetic interference. Knurled coupling nuts establish vibration-proof mating without inadvertent loosening.

Internal longitudinal keyways ensure correct pin orientation during manual maintenance. The product line accommodates up to twenty pins supporting operating current ratings up to five amperes.

Installation techniques and vibration mitigation for industrial connectors

When assembling Feida Yongfeng cable connectors, technicians should observe strict procedures regarding insulation stripping, conductor tinning, and braid shielding termination.

To eliminate conductor stress at solder points, rear clamp screws must compress the outer jacket uniformly through an elastomeric bushing. In high-vibration production environments, threaded collars should be torqued with calibrated tools and secured with removable threadlocker.

Protective rubber caps and tethered metal dust covers prevent accumulation of airborne dust, cutting fluid mist, and metallic debris within uncoupled contact sockets.

Feida Yongfeng and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Feida Yongfeng and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.