Industrial Electronic Enclosures Box Enclosures

Industrial electronic enclosures and protective housings by Box Enclosures designed for instrumentation, automation controllers, and handheld electronic devices.

Extruded Aluminum Enclosures BEX Series

Extruded aluminum profile housings of the BEX series are engineered from anodized alloy for desktop and instrumentation electronics. The structure delivers passive heat dissipation and structural shielding against electromagnetic interference across industrial automation environments.

Internal card guide slots provide slide-in retention for standard printed circuit boards
Anodized protective surface finishing in black, silver, red, green, gold, and blue shades
Recessed top surface area measuring half a millimeter deep for labeling and membrane decals
Mounting interface for EP end plates and protective elastomer end caps of the EC product line

Sealed Industrial Enclosures BEN NEMA 4 and IP65

Heavy-duty protective housings of the BEN series protect instrumentation assemblies within demanding shop floor environments. Molded from resilient ABS and polycarbonate, these enclosures shield electronics against airborne particulates, moisture jets, and chemical splashing.

Sealing boundary complies with NEMA 4 and IP65 ingress ratings with elastomeric gaskets
Configuration options include opaque industrial gray lids or optically transparent covers
Stainless steel assembly screws with M3.5 and 8-32 threading prevent thread corrosion
Internal threaded bosses enable secure board mounting alongside external MF wall brackets

Handheld Instrument Housings with Display Window LLCD

Ergonomic handheld housings of the LLCD series are tailored for portable diagnostic instruments, wireless controllers, and field inspection tools. The housing features a front bezel recess for keypads, an LCD window, and an isolated battery compartment serviceable from the exterior.

Inspection display apertures accommodate liquid crystal panels up to 65 by 23 millimeters
Recessed front face accommodates custom graphical overlays and tactile membrane switch pads
Integrated power compartments accommodate single 9V cells or dual AA battery configurations
Impact resistant polymer construction available in jet black or industrial light gray tones

Miniature Portable Enclosures Pocket Box

Pocket Box miniature housings accommodate compact electronic hardware, wireless remote transmitters, and field sensor tags. The optimized internal layout supports dense printed circuit assemblies, miniature battery holders, and radio frequency communication electronics within a lightweight package.

Three structural formats Pocket Box Small, Medium, and Large suit diverse payload dimensions
Special infrared permeable PMMA material options allow seamless transmission of optical beams
Removable belt clips allow operators to attach portable transceivers to clothing securely
Height extension spacer inserts expand internal volume by ten millimeters when required

Flange and Wall Mount Enclosures BF Series

BF series mounting housings feature molded flange brackets for fast installation against equipment panels, electrical cabinets, and facility walls. Molded from flame retardant ABS plastic compliant with UL 94 V0 ratings or glass-reinforced nylon, these enclosures withstand mechanical stress.

Integral perimeter mounting ears allow rigid screw fastening onto structural steel framing
Self-extinguishing ABS UL 94 V0 engineering polymer delivers verified fire retardant ratings
Twenty-two standardized dimensions from compact 30x22 mm units up to 200x150 mm profiles
Interlocking tongue and groove perimeter joint shields electrical components from impacts

Elastomer Protective Boots and Hardware Accessories

Box Enclosures hardware accessories enhance durability and versatility for industrial enclosures. The catalog provides protective elastomer boots, cushioning profile caps, DIN rail mounting brackets, and battery contacts engineered for reliability in severe environments.

Protective elastomer boots of the RBT series absorb dynamic impact energy from accidental drops
Molded shock-absorbing end caps EC1 through EC5 guard aluminum profiles against corner denting
Snap-on DIN rail adapters enable swift mounting onto standard 35 mm DIN rails in control racks
Nickel-plated steel spring battery contacts and terminal clips of the BAT and SBH lines

Thermal Dissipation and Structural Shielding in BEX Aluminum Profiles

Box Enclosures BEX series extruded aluminum housings deliver reliable passive thermal management for electronic assemblies without relying on motorized cooling fans.

The heavy aluminum profile walls exhibit high thermal conductivity, acting as an integrated heat sink that conducts thermal energy away from microprocessors and power components.

Internal longitudinal card guide slots provide mechanical retention for circuit boards while promoting direct thermal coupling into the metal enclosure structure.

The solid metallic perimeter creates an effective electromagnetic shield that attenuates industrial radio frequency interference and protects low-voltage sensor circuits.

Sealing Performance and Environmental Endurance of BEN Housings

Industrial BEN series protective enclosures deliver dependable protection for sensitive control assemblies in dusty production bays, water treatment areas, and outdoor equipment installations.

The base and cover are molded from durable ABS polymer or clear optical polycarbonate formulated for ultraviolet stability and thermal cycling resistance. A continuous elastomeric perimeter gasket seated within a precision groove prevents entry of fine particulates and pressurized water jets.

Threaded stainless steel assembly fasteners engage internal metal inserts, ensuring repeated maintenance opening and resealing without stripping.

Ergonomic Architecture of LLCD Handheld Instrument Housings

Portable LLCD series instrument housings are sculpted according to industrial ergonomics for mobile diagnostic meters, field calibration tools, and wireless data collection terminals.

The front panel features a recessed border zone tailored for flush mounting of tactile membrane switch pads, preventing perimeter edge lifting during rigorous shifts. An integrated display window provides broad viewing angles for liquid crystal modules.

An isolated rear battery compartment allows swift replacement of power cells without opening the main enclosure volume, protecting delicate circuit boards from airborne grime and static discharge.

Pocket Box Miniature Enclosures for Wireless Remotes and Sensors

Pocket Box miniature enclosures are tailored for compact wireless transmitters, portable sensor modules, and remote machine controllers. The lightweight design achieves mechanical rigidity through internal reinforcement ribs distributed along internal wall faces.

For units communicating over optical wavelengths, specialized versions molded from infrared-permeable PMMA polymers permit unhindered transmission of optical data beams.

Internal mounting bosses support multilayer printed circuit assemblies, while detachable belt clips provide secure personal retention for plant operators on the move.

Rigid Flange Mounting and Structural Integrity of BF Series Enclosures

BF series flange housings provide permanent wall attachment for electronic automation controllers and distributed interface nodes. Molded perimeter mounting ears enable secure anchoring against machine frames, electrical distribution cabinets, and facility walls subject to vibration.

The flame retardant ABS material meeting UL 94 V0 safety standards prevents flame propagation under potential electrical overheating faults.

An interlocking tongue and groove perimeter joint between the lid and base prevents particulate ingress, ensuring uninterrupted operation of internal microelectronics.

Elastomer Shock Protection and Flexible Mounting Hardware Systems

To maximize equipment survival in demanding field operations, Box Enclosures provides a broad portfolio of protective boots and mounting hardware. Flexible RBT series elastomeric boots envelope handheld housings, absorbing kinetic impact shock during accidental drops onto concrete plant floors.

EC series molded end caps protect extruded aluminum profiles against corner deformation and surface scratches. Snap-on mounting adapters allow rapid retention of compatible enclosures onto standard 35 millimeter DIN rails within control cabinets, ensuring orderly modular arrangement.

Box Enclosures and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Box Enclosures and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.