Greenpumps industrial sealless magnetic drive pumps and systems

Greenpumps sealless magnetic drive pumps: GPCA metallic centrifugal pumps, GPTA regenerative turbine models, and GPC/GPT solid thermoplastic chemical pumps.

Sealless alloy centrifugal magnetic drive pumps of the GPCA series

Greenpumps GPCA metallic magnetic drive centrifugal pumps comply with ISO 2858, ISO 5199, and API 685 standards. Wetted components formed from AISI 316, titanium, and Hastelloy guarantee total hermetic containment for hazardous and highly corrosive chemical fluid transfers.

Heavy-duty housings formed from AISI 316, Hastelloy C276, Titanium, and Alloy 20
Hermetic containment via synchronous magnetic drive eliminating mechanical shaft seals
Modular back pull-out configuration for rapid servicing without piping disruption
Closed hydraulic impellers engineered with axial thrust balance to extend bearing longevity

Sealless alloy regenerative turbine pumps of the GPTA series

Greenpumps GPTA metallic regenerative turbine pumps with peripheral impellers are engineered for low-flow, high-head industrial circuits. They reliably handle liquefied gases, volatile solvents, and hazardous chemicals without pulsation or vapor locking risks.

Self-balancing regenerative turbine impellers delivering constant high-head pressures
High-coercivity samarium cobalt SmCo permanent magnets with thermal stability
Safe continuous handling of volatile chemicals and fluids exhibiting high vapor pressures
Precision thrust bearings and shaft sleeves sintered from pure silicon carbide SiC

Thermoplastic chemical centrifugal sealless pumps of the GPC series

Greenpumps GPC thermoplastic magnetic drive pumps feature heavy-walled housings machined from solid polypropylene PP and polyvinylidene fluoride PVDF. The units deliver reliable service when transferring concentrated mineral acids and caustic alkalis.

Thick-walled solid-block PP and PVDF housings engineered for high internal pressures
Complete chemical inertness against hydrochloric, sulfuric, and nitric acid streams
Non-metallic rear containment shell eliminating electrical eddy current thermal losses
Self-priming GPC-SP variant for chemical fluid lift from below-grade storage sumps

Thermoplastic regenerative turbine sealless pumps of the GPT series

Greenpumps GPT thermoplastic regenerative turbine pumps unite polymer chemical inertness with peripheral turbine hydraulic heads. Machined PVDF and PP volutes resist environmental stress cracking and handle chemical dosing and sampling loops.

Precise dosing and high discharge pressure generation across low flow chemical lines
Wetted parts machined from virgin PVDF and PP without exposed metallic contact
Magnetic drive assembly incorporating high-purity Al2O3 or silicon carbide bearings
Dry self-priming GPT-SP design for safe chemical offloading from drums and tankers

Positive displacement gear pumps of the GPFG and GPIG series

Greenpumps GPFG and GPIG industrial gear pump series are developed for positive displacement transfer of viscous fluids, resins, and oils. The sealless GPFG line combines magnetic drives with brushless DC motors, while the sealed GPIG line targets high-temperature oil duties.

Precision spur and helical gears machined from wear-resistant alloy tool steels
Sealless GPFG magnetic drive configuration with BLDC motor for flow modulation
Specialized GPIG mechanical seal arrangement engineered for hot thermal oils in fryers
Uniform pulseless displacement across high viscosity media without foaming

Special engineered, high-temperature, and sanitary pumps

Greenpumps engineered pump executions encompass multistage GPCTA models for low NPSHa duties, mirror-polished sanitary GPA/GPTA pumps with Tri-Clamp fittings, and high-temperature units featuring thermal barriers for fluids exceeding 315°C (599°F).

Multistage GPCTA hydraulic design: centrifugal first stage with turbine second stage
Sanitary GPA/GPTA executions with mirror-polished surfaces meeting hygienic criteria
High-temperature GPTA executions with internal thermal isolation for fluids over 315°C
GPA sliding vane positive displacement pumps for volatile thin liquids

Hermetic magnetic drive principles and hydraulic balancing across GPCA pump units

Greenpumps GPCA series sealless magnetic drive centrifugal pumps eliminate process leakage by utilizing synchronous non-contact magnetic coupling transmissions.

The external neodymium or samarium cobalt drive magnet rotor couples across a stationary, pressure-retaining containment shell to rotate the internal impeller magnet assembly.

Complete absence of dynamic mechanical shaft seals guarantees zero hazardous emissions across toxic, explosive, and carcinogenic process streams.

Hydraulic impeller balance holes mitigate axial thrust loads, minimizing mechanical wear across pure silicon carbide sliding bushings and supporting uninterrupted operational intervals in chemical processing plants.

Thermal stability parameters and samarium cobalt permanent magnets for hot fluid duties

In high-temperature process conditions, Greenpumps engineers incorporate samarium cobalt SmCo permanent magnet grades that retain high magnetic coercivity and resist demagnetization at temperatures surpassing three hundred degrees.

Internal hydraulic circulation channels direct a metered portion of pumped liquid through the containment sleeve gap, continuously dissipating heat generated by electrical eddy currents.

For specialized GPTA configurations handling thermal liquids up to 315°C (599°F), an intermediate thermal isolation barrier decouples hot volutes from the magnetic drive assembly while external cooling flushes preserve magnet temperatures around 100°C.

Corrosion resistance and structural integrity across solid thermoplastic GPC housings

Greenpumps GPC and GPT thermoplastic pump lines are engineered to provide chemical containment across concentrated mineral acids, caustic alkalis, and electroplating baths.

Rather than relying on thin polymer linings prone to permeation and delamination, Greenpumps manufactures housings from solid-block or thick-walled injection molded polypropylene PP and polyvinylidene fluoride PVDF.

Heavy wall sections withstand severe hydrostatic pressures and system pressure surges without mechanical distortion. The non-conductive rear containment shell eliminates electrical eddy current induction heating, ensuring safe transfer of temperature-sensitive reagents.

Regenerative turbine hydraulics and self-priming dynamics across the GPT series

Greenpumps GPT and GPTA regenerative turbine pumps are designed for process applications demanding high differential discharge heads at low volumetric flow rates.

The precision peripheral impeller features multiple radial vanes operating within an annular side channel, repeatedly imparting kinetic energy to fluid molecules and generating heads substantially greater than standard single-stage centrifugal wheels.

This peripheral flow dynamic yields steep linear performance curves and accommodates up to twenty percent entrained gases and vapors without cavitation or vapor lock during chemical reactor unloading.

Sanitary engineering standards and positive displacement gear pumps GPFG and GPIG

For pharmaceutical processing, biotechnology, and food-grade operations, Greenpumps manufactures sanitary pump lines featuring mirror-finished wetted surfaces and standardized Tri-Clamp connections.

Positive displacement GPFG series gear pumps combine hermetic magnetic drive couplings with brushless DC electric motors to achieve pulseless, high-precision metering across viscous resins, syrups, and chemical reagents.

Dead-leg-free hydraulic geometries facilitate rapid clean-in-place CIP and steam sterilization SIP procedures, preventing microbial growth and batch cross-contamination.

Preventative maintenance schedules, radial clearance inspection, and silicon carbide bearings

Operational dependability across Greenpumps sealless pumps is preserved through scheduled diagnostic inspection of radial and axial bearing clearances.

Precision sliding sleeve bearings and thrust collars constructed from sintered silicon carbide deliver extreme diamond-like hardness and chemical inertness, yet require an unbroken liquid lubricating boundary film during operation. Dry running without liquid priming is strictly prohibited.

Periodic maintenance protocols include inspecting elastomer FKM or FFKM fluoropolymer O-rings, cleaning magnet carriers of particulate matter, and validating shell insulation.

GREENPUMPS and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of GREENPUMPS and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.