Turanlar industrial woodworking machinery and processing lines

Turanlar Makina industrial equipment: high-speed edge banders T-EB, horizontal panel sizing centers T-PE, and continuous postforming machinery T-PF.

Industrial edge banding machinery of the T-EB series

Turanlar T-EB 701, T-EB 601, and T-EB 157 edge banders handle continuous tape application at feed rates up to 25 m/min. Units combine heavy track chains and belt top pressure beams to guarantee stable board travel through high-speed profile milling stations.

Continuous track feed velocity from 15 to 25 m/min with responsive speed control
Heavy-duty transport chain featuring durable rubber pads and synchronized pressure belt
Quick-release teflon-coated adhesive melting basins accommodating EVA and PUR glues
High-frequency end trimming, edge milling, radius scraping, and buffing stations

CNC horizontal panel sizing centers of the T-PE series

Turanlar T-PE 436 OPT and T-PE 433 OPT horizontal panel sizing centers provide heavy book and single-sheet cutting across particleboard and MDF. The rigid saw carriage travels along hardened guideways, featuring main blade projection up to 125 mm for elevated output.

Main saw blade projection reaching 125 mm for multi-layer panel book sizing operations
Digital AC servo drive for dynamic saw carriage travel with variable velocity adjustment
Heavy rear program pusher equipped with pneumatic floating clamps for sheet positioning
Hydraulic rear scissor lift table for automated high-volume panel stack feeding cycles

Continuous postforming and laminating machinery T-PF

Turanlar T-PF 777 and T-PF 590 continuous postforming units heat and bend decorative HPL and CPL laminates over profiled edges. Equipment produces seamless radiused contours across kitchen worktops, window boards, and cabinet fronts with throughput velocity up to 20 m/min.

Continuous feed speed regulation from 0 to 20 m/min for diverse laminate thicknesses
Multi-zone infrared quartz heating elements featuring independent thermal monitoring
Configurable profile roller sets accommodating 90 and 180 degree bending contours
Pneumatic pressure shoes and friction feed track ensuring reliable workpiece guidance

Curved workpiece edge banding and trimming units

Turanlar T-EB 130 manual curved edge banders and T-FE 140 contour trimming machines process shaped, concave, and convex furniture panels. The equipment reliably bonds coiled PVC, ABS, and melamine edging ribbons from 0.4 up to 3 mm thickness onto shaped panel substrates.

Bonds coiled PVC, ABS, and melamine edging ribbons spanning 0.4 to 3.0 mm thickness
Adjustable mechanical feed throughput from 1 to 5.5 m/min matching manual handling
Integrated pneumatic guillotine blade delivering clean automatic cutoff for tape coils
Heated adhesive reservoir featuring anti-adherent lining and rapid heating elements

Multi-spindle drilling and boring machines T-CD 121

Turanlar T-CD 121 multi-spindle boring machines feature 21 drilling chucks on 32 mm centers to drill vertical and horizontal hole patterns. The pneumatic tilting boring head swings smoothly between 0 and 90 degrees for dowel, shelf peg, and hinge hardware preparation.

Precision boring head featuring 21 spindles spaced at standard 32 mm center intervals
Pneumatic tilting mechanism swinging drilling block from 0 to 90 degrees for panel edges
Quick-change bit chuck adapters accommodating through-hole and blind dowel drilling tools
Ergonomic foot pedal actuation initiating sequential pneumatic clamping and boring strokes

Adhesive basins, trimming units, and feed track spare parts

Functional spare parts and subassemblies for Turanlar machinery encompass modular glue reservoirs, high-speed trimming motor spindles, feed track chain links fitted with rubber pads, drive belts, and pneumatic actuator cylinders for automated positioning during manufacturing shifts.

Interchangeable teflon-treated glue basins enabling rapid switching between adhesive glues
High-frequency electric spindles for edge trimming and radius profiling with low vibration
Conveyor chain links equipped with durable rubber friction pads and reinforced drive belts
Industrial pneumatic solenoid valves, pressure regulators, and clamping actuator cylinders

Kinematic design and vibration dampening across high-speed T-EB edge banders

Industrial automated edge banding machinery developed by Turanlar under the T-EB designation is engineered for non-stop multi-shift manufacturing routines in serial panel furniture facilities.

The structural foundation consists of a rigid monobloc welded steel frame that undergoes thermal stress relief to eliminate internal metallurgical stresses.

Workpiece panel transport relies on a heavy-duty chain conveyor equipped with wear-resistant vulcanized rubber friction pads traveling along precision-ground induction-hardened track guides.

The synchronized overhead pressure beam fitted with a reinforced poly-V belt distributes downward clamping force evenly across delicate melamine foil finishes without slippage at feed rates up to twenty-five meters per minute.

Adhesive thermal dynamics and rapid melting pot replacement on Turanlar machines

The adhesive application station across Turanlar T-EB series machinery incorporates an interchangeable teflon-treated glue reservoir with integrated tubular heating elements.

Independent electronic temperature regulation between the premelting reservoir and the knurled applicator roller prevents thermal degradation of hot-melt EVA and reactive PUR polyurethane polymers during temporary cycle pauses.

Automated temperature setback activates during idle intervals to suppress charring and adhesive carbon buildup.

The modular quick-disconnect mechanical architecture allows maintenance personnel to execute thorough solvent cleaning or swap melting pots to switch adhesive formulations in mere minutes without halting general factory shifts.

Heavy-duty panel sizing dynamics on CNC horizontal beam saws of the T-PE series

Turanlar T-PE series CNC horizontal beam panel saws execute high-precision book and single-sheet cutting across particleboard panels, medium-density fiberboard, and laminated veneers.

The heavy saw carriage traverses along precision ground prismatic guideways powered by an AC brushless servo motor through a ground helical rack-and-pinion transmission.

The primary circular saw blade boasts projection up to one hundred twenty-five millimeters, driven by an independent high-torque motor, while the synchronized climb-cut scoring saw blade eliminates veneer chipping along bottom panel edges.

Heavy rear program pushers equipped with pneumatic floating grippers ensure repeatable sheet positioning under continuous dimensional supervision.

Continuous thermal activation and edge radius forming in T-PF postforming units

Through-feed postforming machinery of the Turanlar T-PF 777 and T-PF 590 series performs controlled plastic bending of high-pressure decorative laminate HPL and CPL over pre-machined substrate edges.

Workpieces pre-coated with contact adhesive travel continuously through sequential infrared quartz radiation heating zones. The calibrated thermal gradient softens thermosetting resins into a pliable state without blistering decorative foil layers.

A tandem array of spring-loaded contouring rollers progressively wraps the pliable sheet around profile radii of ninety or one hundred eighty degrees, ensuring unbroken structural bonding across the entire workpiece profile perimeter.

Multi-spindle coordinate drilling and pneumatic boring heads across the T-CD series

Turanlar T-CD 121 multi-spindle drilling and boring machines are engineered for rapid drilling of joint hardware holes and mounting patterns in cabinet components.

The heavy boring beam accommodates twenty-one rotating drill spindles spaced at standardized thirty-two millimeter center increments conforming to international furniture manufacturing norms.

The pneumatically actuated boring head tilts securely between horizontal, vertical, and intermediate angular positions from zero to ninety degrees.

Quick-change collet chuck adapters enable rapid tool changes between through-hole and blind dowel boring bits without requiring specialized hand wrenches.

Preventative maintenance guidelines and lubrication protocols for woodworking machinery

Prolonged operational longevity and rated precision across Turanlar woodworking machinery depend on consistent execution of maintenance and lubrication protocols.

Routine dust extraction shroud clearing removes accumulated wood shavings and airborne particles, preventing localized thermal buildup on high-frequency spindle motors and avoiding resin buildup along sliding guideways.

An automated centralized lubrication distributor injects metered lubricant pulses into linear carriage bearings and pneumatic cylinder linkage pivots. Prompt replacement of reversible solid carbide knives on trimming cutterheads and scoring blades eliminates micro-vibrations and edge breakout.

Turanlar and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Turanlar and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.