Fujikura optical fusion splicers, precision cleavers, and genuine spare parts

Direct commercial supply of Fujikura optical fiber fusion splicers, precision optical cleavers, genuine electrodes, rechargeable batteries, and original maintenance parts.

Core-Alignment Fusion Splicers Fujikura 90S+ and 88S+

The flagship Fujikura 90S+ and 88S+ single-fiber core-alignment fusion splicers feature Active Fusion Control Technology, delivering 7–9 second splicing and industry-leading splice loss for telecom backbones.

Ultra-low typical splice loss of 0.02 dB on single-mode optical fibers (ITU-T G.652/G.657)
Automated wind protector and rapid 9–10 second automated tube heating oven for 60mm sleeves
Long-life ELCT2-16B electrodes rated for 5,000 arcs and BTR-15 battery for 300 cycles
Integrated Bluetooth wireless communication with CT50 cleaver for dynamic blade management

Compact FTTx Fusion Splicers Fujikura 45S and 41S+

Compact active clad-alignment fusion splicers Fujikura 45S and 41S+ are optimized for high-speed fiber-to-the-home (FTTx) rollouts, enterprise data centers, and local distribution networks.

Simultaneous dual-fiber preparation mechanism substantially accelerates installation speed
Enlarged splicing area and multi-position high-contrast color LCD for field usability
Rugged drop-tested, dustproof, and moisture-resistant chassis for harsh outdoor environments
Full compatibility with FH-70 series fiber holders for 250µm, 900µm, and drop cables

Mass Fusion Ribbon Splicers Fujikura 90R+ (90R12, 90R16)

Mass fusion splicers Fujikura 90R+ (90R12 and 90R16) perform simultaneous group splicing of optical fiber ribbons with up to 12 and 16 fibers per single arc cycle in high-density data centers.

Field-replaceable V-groove assembly allows rapid on-site maintenance without factory turnaround
Coordinated thermal stripping and ribbon cleaving with RS03 strippers and CT50 cleavers
Precision ribbon alignment algorithms with dynamic arc power control across all fibers
Interchangeable FH-70-12 and FH-70-16 ribbon holders for 200µm and 250µm pitch cables

Field Telecom Splicers Fujikura FSM-80S, 70S, and 60S

The classic Fujikura FSM-80S, FSM-70S, FSM-60S, and FSM-50S fusion splicers remain workhorses across global telecom backbones. We supply OEM replacement parts and assemblies to maintain factory precision.

Original ELCT2-20A tungsten electrodes ensuring arc consistency and precise arc calibration
Replacement precision V-groove blocks and internal optical surface-mirror assemblies
Stepper micro-motors for precise fiber carriage alignment and objective lens focusing
Fresh rechargeable battery packs BTR-09 (for 80S/70S) and BTR-08 (for 60S/60R)

Precision Optical Cleavers Fujikura CT50, CT08, and CT16

Fujikura CT50 and CT08 high-precision optical fiber cleavers produce true perpendicular mirror-like fiber end-faces with cleave angles consistently below 0.5°, preventing splice failure and optical return loss.

CT50 automated optical cleaver with motorized rotating circular blade rated for 60,000 cleaves
Wireless Bluetooth blade-life tracking and automated blade rotation triggered by 90S+ splicers
Ergonomic CT08 and CT16 single-action handheld cleavers equipped with robust CB-08 blades
Genuine CB-08 cutting wheels, fiber scrap collectors, and clamping rubber pads

Genuine Electrodes Fujikura ELCT2-16B and ELCT2-20A

Genuine Fujikura electrode pairs are fabricated from ultra-pure tungsten alloys with tightly controlled tip radii, guaranteeing arc discharge stability, accurate arc calibration, and maximum splice longevity.

ELCT2-16B electrodes compatible with Fujikura 90S+, 90S, 88S+, 86S, 45S, 41S+, 28S models
ELCT2-20A electrodes tailored for legacy FSM-70S, FSM-80S, FSM-60S, FSM-50S, and 18S series
Rated service life of up to 5,000 arc discharges with uniform plasma power distribution
Factory-sealed blister packaging protecting electrode tips from atmospheric oxidation

Precision V-Grooves, FH Fiber Holders, and Micro-Drive Motors

We supply essential mechanical, optical, and motion components for Fujikura splicers: ultra-precise V-groove blocks, fiber clamp assemblies, dedicated holders, and precision stepper drive motors.

Sub-micron ceramic and metallic V-groove blocks ensuring optical fiber concentricity
Interchangeable FH-70, FH-60, and FH-50 series fiber holders for loose and tight buffer fibers
Precision X, Y, Z alignment stepper micro-motors and optical camera focusing modules
Automated wind-protector clamp latches, clamp pads, and sleeve heater heating assemblies

Rechargeable Batteries BTR, Power Adapters ADC, and LCD Displays

For uninterrupted field operation, we supply genuine high-capacity Fujikura lithium-ion batteries, ADC power supply/charger adapters, DC car cords, and high-brightness replacement LCD display modules.

Original Li-ion battery packs BTR-15 (for 90S+/90R+), BTR-09 (for 80S/70S), and BTR-08 (for 60S)
AC power adapters/chargers ADC-20 and ADC-18 with DCC-20/18 DC vehicle charging cords
High-contrast sunlight-viewable color touchscreen LCD monitors with protective glass
Internal main logic control boards, flexible FPC interconnect cables, and CMOS image sensors

Supply Terms and Limitations

Equipment and spare parts from Fujikura are supplied against formal commercial purchase requests. Pricing, warehouse availability, and delivery lead times are confirmed individually per order.

Open retail price lists and public inventories are not published; all quotes are provided per project
We operate as an independent supplier of industrial equipment and genuine replacement spares
This page covers telecom and fusion splicing solutions from Fujikura Ltd. and does not cover Fujikura Composites
Standard supplier warranty terms and factory inspection compliance documents are confirmed upon ordering

Equipment identification and Fujikura fusion splicer generation taxonomy

Fujikura Ltd. (founded in 1885 in Tokyo by Zenpachi Fujikura) stands as the world pioneer and recognized benchmark manufacturer of optical fiber fusion splicing instruments, precision cleavers, and optical telecommunications equipment.

The comprehensive Fujikura portfolio encompasses flagship core-alignment single-fiber splicers (90S+, 90S, 88S+, 86S), compact active clad-alignment field splicers (45S, 41S+, 28S), mass ribbon multi-fiber splicers (90R+, 90R12, 90R16), and widely deployed field legacy platforms (FSM-80S, FSM-70S,

FSM-60S, FSM-50S).

For accurate machine identification and authentic component replacement, locate the metal rating plate attached to the splicer casing or bottom plate. The nameplate details the exact model code, unique serial number (S/N), supply voltage, and hardware production series.

Flagship core-alignment fusion splicer 90S+ and Active Fusion Control Technology

The Fujikura 90S+ represents the premier industry standard for high-reliability optical backbone installations. At its core is Active Fusion Control Technology, dynamically analyzing fiber cut surface conditions and plasma glow intensity to adjust arc discharge energy in real time.

The splicer achieves an industry-leading typical insertion loss of 0.02 dB on standard single-mode optical fiber (ITU-T G.652).

Operating in SM FAST mode, splice execution requires merely 7–9 seconds, while the automated dual-chamber tube heater shrinks standard 60mm protection sleeves within 9–10 seconds.

Fully automated motorized wind protector covers and fiber clamps open and close autonomously upon splice completion, cutting down manual handling and maximizing field operator productivity during high-volume cable jointing.

Compact active clad-alignment splicers 45S and 41S+ for FTTx deployment

For fiber-to-the-home (FTTx) distribution, multi-dwelling building entry terminals, and enterprise data center structured cabling, field engineers demand compact footprint, rapid fiber prep, and resilience in congested splice closures.

The Fujikura 45S introduces simultaneous dual-fiber preparation, enabling technicians to strip, cleave, and set two optical fibers concurrently, trimming total jointing labor by up to 30%.

Active V-groove alignment mechanisms eliminate dust-induced axial offsets and ensure consistent joint integrity.

The chassis is engineered to endure drop impacts up to 76 cm across multiple angles, and provides robust dust- and rain-resistance with embedded Bluetooth pairing for telemetry exchange with smartphones and cleavers.

Mass fusion ribbon splicers 90R+ and high-density multi-fiber connectivity

High-capacity hyperscale cloud data centers and metro distribution networks increasingly utilize high-count ribbon fiber cables. The Fujikura 90R12 and 90R16 mass fusion splicers simultaneously join up to 12 and 16 fibers per single fusion cycle.

A notable breakthrough in the 90R+ architecture is the field-replaceable V-groove assembly. Should optical resin residue or micro-abrasion degrade fiber seating, the entire V-groove block can be detached and swapped directly on site within minutes without factory return.

Uniform ribbon end-face preparation is maintained using RS03 thermal strippers and CT50 precision ribbon cleaver adapters, achieving sub-micron cleave length uniformity across the entire ribbon width.

Field maintenance and motion rebuilds for legacy FSM-80S, 70S, and 60S models

A massive installed base of previous-generation Fujikura splicers—including the FSM-80S, FSM-70S, FSM-60S, and FSM-50S—continues to serve telecommunications contractors globally. Through timely preventive maintenance, these instruments deliver excellent low-loss performance.

Typical factors contributing to loss elevation in aged machines include tungsten electrode erosion, internal reflection mirror contamination, and wear on stepper carriage drives. We supply genuine ELCT2-20A electrodes, front-surface optical mirrors, and precision gear motor assemblies.

To sustain field autonomy, we supply genuine high-yield rechargeable batteries BTR-09 and BTR-08, engineered to retain charge under sub-zero ambient conditions without brownouts during the high-current heating cycle.

Precision optical cleavers CT50 and CT08: wireless Bluetooth blade management

Splice quality relies heavily on initial fiber preparation and perpendicularity of the cleaved facet. Fujikura CT50 and CT08 precision cleavers utilize diamond-sharpened tungsten carbide circular blades, delivering cleave angles consistently below 0.5 degrees.

The CT50 communicates with 90S+ and 88S+ splicers via Bluetooth wireless link. When the splicer detects a degraded cleave angle or chipped face, it signals the cleaver to engage its internal motorized drive and automatically rotate the circular blade to an unblemished cutting sector.

With 16 rotational sectors across 3 height settings, the CB-08 blade achieves a rated lifespan of 60,000 cleaves. For basic field installations, the manual single-action CT08 cleaver provides rugged durability and integrated glass scrap retention.

Genuine ELCT electrodes: metallurgical purity and dynamic arc calibration

Splicer electrodes withstand severe thermal stress, generating localized plasma exceeding 2,000 degrees Celsius. Genuine Fujikura electrodes are precision-ground from high-purity tungsten alloys with tight tip radius tolerances.

Non-genuine third-party substitutes frequently introduce arc center instability, uneven thermal expansion, micro-voids in the molten core, and premature electrical breakdown of the high-voltage ignition transformer.

We supply genuine ELCT2-16B (for 90S+, 88S+, 86S, 45S, 41S+) and ELCT2-20A (for 80S, 70S, 60S, 50S) electrodes in factory blisters.

Following electrode replacement, operators perform the automated Arc Calibration procedure, which calculates plasma conductivity and compensates discharge current for atmospheric density, elevation, and temperature.

Comprehensive supply of genuine spare parts, FH holders, and BTR batteries

To guarantee zero operational downtime for field optical crews, we maintain comprehensive supply access to the complete Fujikura spare parts catalog: genuine lithium-ion battery packs BTR-15, BTR-09, BTR-08, ADC-20/18 AC power adapter chargers, and DCC-20 vehicle power cords.

Interchangeable magnetic FH-70, FH-60, and FH-50 series fiber holders accommodate 250µm primary-coated fiber, 900µm tight-buffer strands, 2mm/3mm cords, and flat drop cables. We also supply ceramic V-blocks, silicone clamp pads, and high-resolution CMOS microscopic sensor modules.

All parts are delivered with detailed factory technical documentation directly from authorized logistics facilities.

Splicer configurations, delivery lead times, and commercial pricing for Fujikura equipment are determined individually upon official inquiry; public retail price lists are not published by the manufacturer. We are an independent industrial supplier.

This page covers telecommunications solutions from Fujikura Ltd.