Epiroc mining equipment, drill rigs, underground loaders and OEM spare parts

Direct supply of genuine underground face and production drill rigs, articulated Scooptram loaders, surface blasthole drill rigs, high-frequency COP rock drills and OEM parts from Epiroc AB (Sweden).

Underground Face Drill Rigs Epiroc Boomer S1, S2, M20, E2

Epiroc Boomer series underground face drilling rigs equipped with 1 to 3 robust BUT telescopic booms and intelligent Rig Control System (RCS) deliver fast and precise blasthole drilling from 33 to 76 mm diameter in tunneling, mining drifts and civil engineering cross sections from 6 to 200 m².

Hole diameter capability from 33 to 76 mm with single-pass feed lengths up to 6.2 m on heavy-duty BMH feeds
Computerized Rig Control System (RCS) featuring ABC Total automated boom positioning and contour control
Powered by COP series rock drills (COP 1838HD+, COP 2238) featuring dual-damping shock absorption technology
Spare parts: BUT boom bronze bushings, hose reels, hydraulic cylinder seal kits, RCS resolvers and angular sensors

Production and Long-Hole Drill Rigs Epiroc Simba E7, S7, M6, M4

Epiroc Simba underground production long-hole drill rigs are designed for radial and parallel fan drilling of upward and downward blastholes from 51 to 115 mm diameter in sublevel stoping, block caving and massive underground mining operations.

Blasthole diameter from 51 to 115 mm, drilling depth up to 51 m using Speedrod T38, T45 and T51 drill string rods
Mechanized Carousel rod handling system enabling automated addition and breakout of threaded drill rods
Heavy-duty hydraulic feed positioning cradle offering full 360° ring drilling rotation across the drift
Spare parts: rod centralizer jaws, feed carrier drive chains, guide bushings, Sauer/Danfoss directional valves

Underground Load-Haul-Dump Loaders Epiroc Scooptram ST7, ST1030, ST14, ST18

Epiroc Scooptram underground articulated Load-Haul-Dump (LHD) loaders with tramming capacities from 6.8 to 18 metric tonnes engineered for rugged mine environments, featuring low-emission Cummins diesel engines, Dana powershift transmissions and FOPS/ROPS certified cabs.

Tramming capacity from 6.8 to 18 tonnes, bucket volumes from 3.1 to 9.0 m³ with Hardox wear plates and GET shrouds
Heavy-duty Dana Spicer drive axles with limited slip differentials and enclosed SAHR wet disc brakes
Load-sensing electro-hydraulic boom control with ride control boom damping and on-board dynamic payload weighing
Spare parts: boom hoist and dump hydraulic cylinders, brake friction plates, Rexroth piston pumps, pivot pins

Surface Blasthole Drill Rigs Epiroc SmartROC and FlexiROC D65, D60, D55

Epiroc SmartROC and FlexiROC surface crawler drill rigs designed for precision blasthole drilling from 89 to 203 mm diameter in open-pit quarries, coal mines and hard rock mining, utilizing Down-The-Hole (DTH) hammers and rotary drilling techniques with optimized fuel economy.

Hole diameter range 89 to 203 mm with maximum drilling depths up to 56 m via carousel rod handling systems
Caterpillar C13/C15 diesel engines paired with two-stage rotary screw compressors delivering pressures up to 30 bar
Intelligent Rig Control System with 3D GNSS satellite rig positioning and automated hole navigation (HNS)
Spare parts: feed drive sprocket pins (p/n 2652227337), mast rollers, rod centralizer bushings (p/n 92003410)

Hydraulic Rock Drills Epiroc COP Series COP 1838HD+, COP 1238, COP MD20, COP SC16

Epiroc industry-leading COP series hydraulic drifters deliver superior penetration rates and drill string longevity in tunneling and surface drilling, engineered with dual reflex damping technology that absorbs reflected shock waves from fractured rock formations.

Impact power output from 11 to 30 kW, operating impact pressure 140 to 230 bar, frequency up to 60–70 Hz
Patented dual reflex damping system extending rock tool life and reducing feed mast stress harmonics by 40–80%
High-torque 05–09 series hydraulic rotation motors delivering dependable torque through fractured and sticky ground
Spare parts: rotation chucks (3161032880), frontheads (3161023100), impact pistons, driver shanks, accumulator diaphragms

Hydraulic Breakers and Demolition Attachments Epiroc HB and SB Series

Epiroc HB series heavy hydraulic breakers with AutoControl stroke adjustment and SB series monobloc Solid Body hammers mount onto carriers from 1.5 to 140 tonnes, engineered for primary rock excavation, oversized boulder fragmentation in quarries and reinforced concrete demolition.

Single impact energy up to 16,000 Joules (HB 7000) with AutoControl automatic stroke switching and blank-firing protection
SB Solid Body monobloc alloy housing design without side tie rods: superior strength, compact size and no bolt fatigue failure
Integrated ContiLube II automatic grease pump delivering continuous high-temperature chisel paste to tool bushings
Spare parts: conical, moil point and blunt working tools, upper/lower tool bushings, seal kits, nitrogen diaphragms

Rock Drilling Consumables Epiroc Powerbit, Speedrod Rods and DTH Down-The-Hole Hammers

Epiroc rock drilling consumables feature Powerbit threaded button bits engineered with proprietary Enduro carbide buttons, heavy-duty Speedrod drill strings (T38, T45, T51), driver shank adapters and high-pressure DTH hammers delivering maximum penetration in hardest formations.

Powerbit button bits from 35 to 152 mm diameter featuring trapezoidal Enduro carbide inserts for superior wear resistance
Speedrod threaded extension rods and couplings surface-hardened and shot-peened for exceptional fatigue and thread endurance
COP M6 high-pressure Down-The-Hole (DTH) hammers engineered for consistent energy transfer and fast flushing in quarries
Rock tools: driver shank adapters for COP drifters, thread adapters, grinding cups and Swellex rock reinforcement bolts

Genuine Spare Parts, COP Drifter Rebuild Kits and Hydraulic Components Epiroc

We supply comprehensive genuine spare parts portfolios for scheduled maintenance, preventive overhaul and field repairs of Epiroc mining fleets: factory COP drifter seal kits, Dana transmission spares, Rexroth hydraulic pumps, OEM filters and heavy undercarriage hardware.

Factory preventive maintenance seal kits for COP rock drills calibrated for 250, 500 and 1,000 engine percussion hours
Major assemblies: rotation chucks (3161032880), frontheads (3161023100), impact pistons, feed drive pins (2652227337)
Hydraulic proportional valves, Rexroth axial piston/gear pumps, nitrogen charge accumulators, relief valves
OEM filtration elements for intake air, engine lube oil, fuel and high-pressure hydraulic circuits with 3–10 micron efficiency

Equipment identification and Epiroc nameplate specification

Epiroc AB (headquartered in Nacka, Stockholm, Sweden, spun off from Atlas Copco Group in 2018) is a premier global productivity partner for the mining and infrastructure industries.

When sourcing complete drilling rigs, underground loaders or requesting replacement components, always reference the official model nomenclature and factory serial number stamped on the stainless steel data plate (e.g., Boomer S2 D, Simba E7 C, Scooptram ST14, SmartROC D65, COP 1838HD+, HB 3100 DP).

The manufacturer serial number (PIN) identifies the exact assembly revision, hydraulic valve block configuration, electrical Rig Control System (RCS) software release and seal materials. Providing a clear photo of the nameplate ensures 100% correct OEM part verification.

Underground face drill rigs Epiroc Boomer: BUT booms and RCS automation

Epiroc Boomer series underground face drilling rigs (Boomer S1, Boomer S2, Boomer M20, Boomer E2) are engineered for rapid drift development, cross-cutting and civil tunneling across excavation cross-sections from 6 to over 200 m².

Equipped with 1, 2 or 3 robust heavy-duty BUT telescopic booms (BUT 35, BUT 45), Boomer rigs maintain automatic hydraulic parallel boom holding and dual-axis feed positioning, allowing drillers to execute blast plans with millimeter contour precision.

The computerized Rig Control System (RCS) with ABC Total package enables fully automated boom navigation and hole positioning directly from 3D mine design files, eliminating overbreak and drastically reducing excavation dilution and cycle times.

We supply complete Boomer assemblies and genuine replacement parts: BUT boom bronze bushings, feed cylinders, BMH feed cradles, hose reels, hydraulic drive motors and RCS sensors.

Production long-hole drill rigs Epiroc Simba and Carousel mechanized rod handling

Epiroc Simba underground production drill rigs (Simba E7, Simba S7, Simba M6, Simba M4) provide high-precision radial and parallel fan drilling for sublevel stoping, sublevel caving and large-scale underground ore extraction.

Simba rigs drill upward, downward and horizontal blastholes from 51 to 115 mm diameter to depths reaching 51 meters using Speedrod T38, T45 and T51 drill string rods. The heavy-duty feed positioning cradle offers continuous 360° ring drilling rotation across the drift.

The mechanized Carousel rod handling system automates rod addition and breakout, eliminating heavy physical labor. Hydraulic centralizers firmly guide the drill string to prevent hole deviation in fractured rock strata.

We supply Simba rig components: centralizer tungsten carbide jaw inserts, carousel drive chains, feed carrier slide pads, rod guide bushings and proportional hydraulic control blocks.

Underground Load-Haul-Dump loaders Epiroc Scooptram: Dana powertrain and hydraulics

Epiroc Scooptram articulated Load-Haul-Dump (LHD) loaders (ST7, ST1030, ST14, ST18) and Minetruck haulers (MT42, MT436, MT54) are built to endure continuous high-tonnage mucking in deep underground mines.

Featuring low-emission Cummins diesel engines or zero-emission battery electric drives, the powertrain relies on heavy-duty Dana Spicer Powershift transmissions and planetary drive axles with enclosed SAHR (Spring Applied Hydraulic Released) wet disc brakes for fail-safe underground braking.

The load-sensing electro-hydraulic system powered by Rexroth variable displacement piston pumps ensures responsive boom hoist and bucket dump action. Buckets are armored with high-strength Hardox wear plates and Ground Engaging Tools (GET).

We deliver genuine replacement components: steering and hoist hydraulic cylinders, Dana axle friction discs, drive shafts, Rexroth hydraulic pumps, articulation spherical bearings and OEM filter kits.

Surface blasthole drill rigs Epiroc SmartROC and FlexiROC for open-pit mining

Epiroc SmartROC (D65, D60, CL) and FlexiROC (D55, T40, T45) crawler-mounted surface drill rigs deliver outstanding penetration rates and fuel economy in limestone quarries, open-pit coal operations and hard-rock metal mines.

Equipped with heavy-duty Caterpillar C13/C15 or Scania diesel engines and high-pressure two-stage rotary screw compressors up to 30 bar, SmartROC rigs deliver high-velocity flushing air directly to Down-The-Hole (DTH) hammers for fast drilling from 89 to 203 mm diameter up to 56 m depth.

SmartROC automated intelligence regulates engine RPM and compressor load according to rock hardness, slashing diesel fuel consumption by up to 30% per drilled cubic meter while 3D GNSS satellite navigation guides hole collar positioning.

We supply feed drive sprocket pins (p/n 2652227337), centralizer guide bushings (p/n 92003410), mast guide rollers, rotary drill heads, high-pressure air hoses and compressor air filters.

High-frequency hydraulic rock drills Epiroc COP series and dual reflex damping

Epiroc COP series hydraulic drifters (COP 1838HD+, COP 1838MUX+, COP 1238, COP 2238, COP MD20, COP SC16) represent the benchmark in rock drilling efficiency for underground and surface rigs worldwide.

The core engineering feature of COP rock drills is the patented dual reflex damping system. Reflected shock waves generated when the bit penetrates fracture zones are absorbed dynamically by a damping piston, preventing shock fatigue from destroying driver shanks and boom feeds.

Delivering impact power from 11 to 30 kW at frequencies up to 70 Hz, COP drills achieve rapid penetration in toughest granites while high-torque 05/09 rotation motors maintain steady rotational torque up to 1,200 Nm.

We supply complete rotation chuck assemblies (3161032880), frontheads (3161023100), striking pistons, shank adapter bushings, high/low pressure accumulator diaphragms and factory preventive overhaul seal kits.

Excavator hydraulic attachments Epiroc HB and SB series breakers

Epiroc hydraulic breakers provide dependable demolition and primary boulder breaking across carriers from 1.5 to 140 metric tonnes: from monobloc SB hammers to ultra-heavy HB 2000 through HB 7000 rock breakers.

The SB series utilizes a unique Solid Body design where the percussion mechanism and housing are manufactured as a single solid monobloc, completely eliminating tie rods and side bolts to prevent bolt shear failures under torsion.

Heavy HB series breakers feature AutoControl stroke regulation that adapts impact energy and frequency to material hardness, and ContiLube II automatic grease pumps that deliver continuous high-temperature chisel paste to tool bushings.

We provide replacement working tools (conical moil points, blunt tools, cross chisels), upper/lower wear bushings, piston seal kits, polyurethane sound dampening cushions and nitrogen accumulator bladders.

Rock drilling tools Epiroc Powerbit, Speedrod rods and DTH hammers

Epiroc rock drilling consumables feature threaded Powerbit button bits engineered with proprietary Enduro carbide buttons having a trapezoidal geometry that maintains sharp drilling edges even under abrasive quartz conditions.

Speedrod extension rods and couplings (T38, T45, T51, GT60) undergo deep carburizing and shot-peening treatments, delivering high surface hardness against hole wall abrasion while retaining an elastic core that withstands cyclic bending fatigue.

For open-pit drilling, tubeless COP M6 Down-The-Hole (DTH) hammers operate under pressures up to 30 bar, delivering maximum percussion energy directly to the bit without air loss. We also supply Swellex inflatable rock bolts for instant ground support.

Equipment configurations, manufacturing lead times and commercial quotations for Epiroc machinery and spare parts are calculated individually upon official inquiry; public standard price catalogs are not published by the manufacturer.

We operate as an independent supplier, not an exclusive distributor of Epiroc.